توضیحات
چکیده
از مهمترين فاكتورهاي انتخاب يك سيستم سازه اي مقاوم در برابر زلزله، ميزان جذب و استهلاك انرژيهاي وارده توسط آن سيستم ميباشد. مطالعه روي قدرت استهلاك انرژي قابهاي خمشي بتني كه با مهاربندهاي واگراي فولادي يا ديواربرشي بتني تركيب شده اند نسبت به ساير سيستمها كمتر مورد توجه محققان بوده است. در اين تحقيق سعي شده است با انجام تحليل ديناميكي غيرخطي تاريخچه ي زماني نود قاب تحت اثر نگاشت زلزله ي ناغان، به كمك نرمافزار ABAQUSعوامل موثر بر ميزان استهلاك انرژي سيستمهاي نامبرده مورد مطالعه قرار گيرد. نتايج تحقيق حاكي از آناست كه در قابهاي مهاربنديشده انرژي ورودي بيشتري نسبت به سيستم قاب-ديواربرشي مستهلك ميشود.
مقدمه
تحقيقات و مطالعات گوناگون حاكي از آناست كه اثرات مخرب زلزله بسيار متاثر از انرژي لرزه اي رسيده به سازه در طول زمان زلزله ميباشد،كه مقداري از اين انرژي توسط اعضاي سازه به علت رفتار غيرخطي آنها جذب ومستهلك ميشود و هرچه ميزان اين انرژي جذب شده، قبل از خرابي سازه(خرابي سازه با تعريف شاخصهاي مختلفي كنترل ميشود) بيشتر باشد عملكرد سازه درهنگام وقوع زلزله بهتر است. براي مقاوم سازي ساختمان هاي بتن آرمه، روشهاي گوناگوني وجود دارد. كاربرد هر روش متفاوت بوده و قابليت استفاده از آن در موارد خاص خود مي باشد. مقاوم سازي مي تواند بصورت محلي بر روي اعضاي ساختمان اجرا گردد. از روشهاي رايج مقاوم سازي لرزه اي اعضاي بتنآرمه مي توان به ستفاده از ورقهاي فولادي اشاره نمود كه معمولاً توسط چسبهاي قوي اپوكسي يا بولت به سطح عضو بتني چسبانيده ميشوند، همچنين استفاده از ورقهاي FRPكه براي اين منظور اخيراً كاربرد بسياري پيدا نموده اند. از نمونه هاي ديگر تقويت محلي اعضا ميتوان به بتن ويژه HPFRCC اشاره نمود ه هم به صورت تر و هم بصورت ورقهاي از پيش ساخته، مشابه ورقهاي فولادي قابليت اتصال به سطوح بتني را دارا هستند. مقاوم سازي همچنين ميتواند بصورت عمومي برروي كل ساختمان و يا قسمتهايي از آن با استفاده از سيستمهاي برشگير مانند ديوارهاي برشي بتني، آجري و يا فولادي و يا قابهاي فولادي و يا مهاربندهاي فولادي اجرا گردد. در مورد مهاربندهاي فولادي كه اخيراً مورد توجه بسيار قرارگرفته اند، مهاربند مي تواند خارج از صفحه قاب بتني به آن متصل گرديده (مهاربند خارجي) و يا بصورت منفرد در داخل قابهاي بتني اجرا گردند (مهاربند داخلي). انتخاب روش و يا روشهاي مورد نظر براي تقويت ساختمان بتنآرمه و يا اعضاي آن به عوامل متعددي بستگي خواهد داشت.
ABSTRACT
The most important factors in the selection of an earthquake-resistant structure system are the absorption and depletion of the energy produced by that system. The study on the power of energy depreciation of concrete flexural frames combined with collapsible steel or concrete wall brackets has been less respected by researchers than other systems. In this research, by analyzing the nonlinear dynamics of the nineteenth period of the frame under the impact of the Naghan earthquake mapping, using the ABAQUS software, the effective factors on the energy depreciation of the mentioned systems have been studied. The results of the research indicate that in the braced frames the input energy is depleted more than the frame-wall-frame system.
INTRODUCTION
Various studies and studies indicate that the destructive effects of earthquakes are highly influenced by the seismic energy reached by the structure during the earthquake, some of which is absorbed by structural members due to their nonlinear behavior, and the more this energy is absorbed, Before structural failure (structural failure is controlled by defining different indices), the performance of the structure during the earthquake is better. Various methods are available to retrofit reinforced concrete structures. The application of each method is different and can be used in its particular cases. Retrofitting can be carried out locally on building members. Commonly used seismic retrofitting of concrete members can be the use of steel sheets, which are usually bonded to concrete concrete with strong epoxy or bolt adhesives, as well as the use of FRP sheets that have recently been used for this purpose. Of the other examples, the local reinforcement of the members can refer to the specific concrete HPFRCC, which can be fitted to concrete surfaces both in form and in sheet form, similar to steel sheets. Reinforcement can also be performed generally on the entire building or parts thereof using cutting systems such as shear walls, brick or steel, or steel frames or steel braces. In the case of steel fasteners that have recently been of great interest, braces can be attached outside of the concrete frame (external brackets) or individually in concrete frames (internal brackets). The choice of method or methods to reinforce a concrete structure or its members depends on a number of factors.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Mohammad Reza Hosseinzadeh, Mehdi Fadaie Dehkordi, Mojtaba Libibzadeh
File Information: persian Language/ 8 Page / size: 684 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : محمدرضا حسين زاده ، مهدي فدايي دهكردي ، مجتبي لبيب زاده
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 684
نقد و بررسیها
هنوز بررسیای ثبت نشده است.