توضیحات
چکیده
مسئله نشت یک موضوع مهم و ضروري در سدهاي خاکی می باشد که با یک تعریف کلی از آن حجم آبی که از مخزن یک سد از دست می رود و نمی توان ازآن استفاده کرده وآن را مدیریت کنیم که در صورت تجاوزاز مقدارمعینی امکان خرابی وشکست در سد وجود دارد لذا دراین راستا نرم افزارهاي زیادي براي پیش بینی و محاسبه دبی نشت تهیه گردیده اند که نسبت به مدلهاي آزمایشگاهی به زمان و هزینه کمتري براي آنالیز نشت قبل از احداث سد خاکی نیاز دارند .جهت پی بردن به عملکرد این گونه نرمافزارها در این مقاله با مد نظر قراردادن اطلاعات واقعی سدخاکی حسنلو واقع در استان آذربایجان غربی (دبی نشت، ارتفاع آب، در بالا دست، تراز آب در پیزومترها و ابعاد بدنه سد و پی و …) که از حدود 10سال پیش آبگیري شده است، مدلی ازسد فوق با مشخصات مصالح و ژئوتکنیک واقعی درنرم افزارهاي seep/wو plaxisکه هر دو مبتنی بر المان محدود بوده که seep/wمختص آنالیز جریان وتراوش و plaxisبراي تحلیل دو بعدي تغییر شکل، پایداري وتحلیل هاي دینامیکی درمهندسی ژئوتکنیک میباشد ترسیم گردیده و تحلیل و محاسبه دبی نشت با هر دو نرم افزار موقعی که آب در چهار تراز مختلف در بالاست سد قرار دارد صورت گرفت که این تحلیل در نرمافزار seep/wبا دو نوع مش بندي مثلثی و مربعی انجام و در نرمافزار plaxisبا مشبندي مثلثی صورت گرفت . بعد از تحلیل دبی نشت در حالت پایدار ،(steady steste) تحلیل درحالت ناپایدار (Transient) درنرم افزار seep/wنیز انجام و با توجه به اطلاعات ورودي واقعی به نرم افزار، دبی نشت سالانه محاسبه و 2نوع پوشش جهت کاهش نشت در بالا دست و کف مخزن معرفی و در نرم افزار seep/wمدل گردید. و در نهایت از کلیه اطلاعات خروجی نتیجه گیري و مقایسه گرد . و مشخص گردید که خروجی هاي نرم افزار seep/wنسبت به plaxisبه واقعیت نزدیکتر بوده و براي محاسبه نشت در سدهاي خاکی قابل اعتماد می باشد.
مقدمه
با تو مطالعاتی که معمولاً قبل از ساخت سد صورت میگیرد، همیشه نمیتوان رفتار هیدرولیکی بدنه سد و یا تشکیلات زمین شناسی مجاور آن را به دقت پیش بینی کرد، بنابراین احتمال وقوع نشت یا نفوذ پس از ساخت سد تقریباً قطعی به نظر می رسد. شدت نشت و یا نفوذ در بسیاري از موارد تا زمانی که ایمنی سد به خطر نیفتاده است قابل قبول میباشد. از نقطه نظر ایمنی بررسی خطرات ناشی از نشت و نفوذ به علت پیچیدگی ذاتی در خصوصیات آنها حائز اهمیت می باشد ، بسیاري از مخازن سدهاي ساخته شده در جهان داراي نشت میباشند، این نشت ممکن است از تشکیلات زمین شناسی ساختگاه سد یا پی سد و یا از خود جسم سد اتفاق افتد.
ABSTRACT
The issue of leakage is an important issue in the earth’s dams, with a general definition of the volume of water that is lost from the reservoir of a dam and can not be used and managed, which, in case of an invasion, would cause damage and destruction in the dam Thereupon, in order to predict and calculate the leakage rate, there are many software that needs less time and cost than leakage models to analyze the leakage before the erosion of the dam. To understand the performance of such software in this paper, Taking into consideration the actual data of Hadanlu Damqavi, located in West Azarbaijan Province (Dubai Leak, Artha Above water level, water level in piezometers and the dimensions of the body of the dam and pit …), which has been plowed about 10 years ago, is a model of the above with the characteristics of actual materials and geotechnical in the seep / w and plaxis products, both based on The finite element is the seep / w for flow analysis and plaxis for the two-dimensional analysis of deformation, stability, and dynamic analysis in geotechnical engineering. Drawing and analyzing the leakage flow with both software when the water is located in four different levels at the top of the dam This analysis was done in the seep / w software with two types of triangular and square mesh and in plaxis software with triangular mesh fat . After a steady state analysis of leakage analysis, a transient analysis in the seep / w software is also performed, and according to the actual input data to the software, annual leakage rate is calculated and two types of coating to reduce leakage above and The tank floor was introduced and was developed in the seep / w software. Finally, we conclude and compare all output information. It was found that the outputs of the seep / w software are closer to reality than plaxis and are reliable to calculate leakage in dams.
INTRODUCTION
With you, studies that are usually done before the dam is constructed, it is not always possible to predict the hydraulic behavior of the body of the dam or its adjacent geological formation, so the probability of leakage or penetration after the construction of the dam appears almost definitive. The severity of leakage or penetration in many cases is acceptable as long as the safety of the dam is not compromised. From the safety point of view, the investigation of the risks of leakage and penetration is important because of the inherent complexity of their properties. Many of the reservoirs of dams constructed in the world are leaking; this leak may be from the geological structure of the dam site or the dam Damage itself occurs.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Hamid Reza Saba, Mehdi Valizadeh Hasanlouei
File Information: persian Language/ 8 Page / size: 675 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : حمیدرضا صبا ،مهدي ولی زاده حسنلوئی
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 675
نقد و بررسیها
هنوز بررسیای ثبت نشده است.