توضیحات
چکیده
معمولاً طراحي ساختمانها در برابر زلزله هاي قوي بر اين اساس استوار است كه سازه بتواند با شكل پذيري خود انرژي زلزله را جذب و مستهلك نمايد. در سالهاي اخير به توسعه ابزار موثر در استهلاك انرژي لرزه هاي القاء شده در سازه اهميت بيشتري داده شده است به نحوي كه پاسخ سازه در نهايت الاستيك باقي بماند. مقدار انرژي سازه به چندين عامل بستگي دارد كه برخي از آنها با مشخصات حركت زمين مانند خصوصيات دامنه، محتواي فركانس ها، دوام زلزله و… خصوصيات سازه مثل خواص ديناميكي سازه مانند پريود طبيعي و ميرائي و خواص مقاومت و… مرتبط ميباشد. استفاده از مستهلك كننده انرژي بعلت افزايش ميرايي، كاهش دامنه نوسان سازه و به دنبال آن كاهش پاسخ لرزهاي آن ميباشد. ميراگر اصطكاكي يكي از انواع ميراگرهاي غيرفعال است كه در محل تقاطع مهاربندري ضربدري اين نوع ميراگر مورد استفاده قرار گرفته و طوري طراحي ميشود كه حين زلزله هاي خفيف يا باد نلغزد اما حين زلزله هاي شديد تحت نيروي از پيش تعيين شده، شروع به لغزش ميكند. اين لغزش، انرژي ورودي را بطور مكانيكي تلف ميكند و از جاري شدن مهاربند و ديگر عضوهاي سازه جلوگيري ميكند، بنابراين عملكرد استفاده بي وقفه سازه را بعد از رخداد زلزله مهيا ميكند. ميرايي، انرژي جنبشي را جذب و از تشديد (فركانس طبيعي سازه منطبق بر فركانس زمين لرزه) جلوگيري ميكند. اساس روش استفاده از اين نوع ميراگر برپايه افزايش ميرايي و كاهش دامنه نوسان و به دنبال آن كاهش پاسخ لرزه اي استوار است. اين نوع ميراگر نيرويي ثابت در خلاف جهت حركت ساختمان وارد ميكند كه با حركت ساختمان مخالفت ميكند. در اين ميان انتخاب ميراگرهاي غيرفعال به خاطر كم هزينه بودن و تكنولوژي مناسب تر نسبت به ميراگرهاي فعال و امكان استفاده آنها در داخل كشور، ارجحيت دارد. بر اين اساس، در اين مقاله با استفاده از مدلسازي ساختمانهاي 8 4و طبقة مجهز به ميراگر اصطكاكي كه تحت تاثير زلزلة طبس و السنترو قرار گرفته اند، با استفاده از نرم افزار آباكوس ABAQUSEتحليل ديناميكي غيرخطي بصورت دو بعدي انجام گرديده و پاسخ اين نوع سازه ها بازاي ميراگر موجود مورد بررسي قرار گرفته است.
مقدمه
طراحي ساختمانها در برابر زلزله هاي قوي بر اين اساس است كه سازه بتواند با شكل پذيري خود انرژي زلزله را جذب و مستهلك نمايد. شكل پذيري در مهندسي سازه تغييرشكل غيرالاستيك مواد در ناحيه مورد انتظار است اگرچه در سازه هاي شكل پذير تغييرشكل هاي بزرگ غيرالاستيك ايجاد ميگردد كه ممكن است پس از زلزله از نقطه نظر هزينه و ايمني سازه مورد استفاده قرار نگيرد.
ABSTRACT
Usually, the design of buildings against strong earthquakes is based on the fact that the structure can absorb and amorphous earthquakes with its ductility. In recent years, the development of effective tools for energy depletion of induced earthquakes has been given more importance in such a way that the structure response will ultimately remain elastic. The amount of energy of the structure depends on several factors, some of which are related to the characteristics of the motion of the earth, such as the characteristics of the domain, the content of the frequencies, the duration of the earthquake, and … structural properties, such as the dynamic properties of the structure, such as the natural period and the damping period, and the properties of the resistor. . The use of energy dissipation due to increased droplet, decreases the amplitude of the oscillation of the structure and, consequently, decreases its seismic response. Friction damper is one of the types of inactive dampers that is used at the intersection of the cross-barrier of this type of damper and is designed to slip off during mild or windy earthquakes, but during severe earthquakes under predefined forces. This slip mechanically wastes energy input and prevents the threading of the braces and prevents other members of the structure, thus providing the uninterrupted operation of the structure after an earthquake event. The damping absorbs the kinetic energy and prevents the resonance (the natural frequency of the structure corresponding to the frequency of the earthquake). The basis of the method of using this type of damper is based on increasing the damping and reducing the amplitude of the oscillation and, consequently, reducing the seismic response. This type of damper forces a constant force in the opposite direction of the building movement, which opposes the movement of the building. In the meantime, the selection of passive dampers is preferable because of low cost and more suitable technology than active dampers and their use in the country. Accordingly, in this paper, using modeling of buildings 8 4 and a class equipped with a friction damper under the influence of the Tabas and Alsentro earthquake, ABAQUSE software has two-dimensional nonlinear dynamic analysis and the response of these types of structures The existing damper has been investigated.
INTRODUCTION
The design of buildings against strong earthquakes is based on the fact that the structure can absorb and amorphous earthquakes with its ductility. Durability in structural engineering is a non-elastic modification of the material in the expected area, although in structural formations, large non-elastic shapes are created which may not be used after the earthquake in terms of cost and safety of the structure.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Hadi Mirsifi, Dr. Mehdi Azhdari Moghadam, Dr. Mansour Ghalevi, Engineer Behrooz Kashtar
File Information: persian Language/ 8 Page / size: 386 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : هدي ميرسيفي ،دكتر مهدي اژدري مقدم ، دكتر منصور قلعه نوي ، مهندس بهروز كشتگر
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 386
نقد و بررسیها
هنوز بررسیای ثبت نشده است.