توضیحات
چکیده
كامپوزيت هاي زمينه آلومينيم مواد مهندسي بسيار با اهميتي هستند كه در صنايع حمل و نقل، هوافضا و ديگر كاربردها بكار مي روند. دليل آن نيز وزن پايين، استحكام مخصوص بالا و خواص مكانيكي و فيزيكي بهتر آنها در مقايسه با آلياژ آلومينيوم خالص است. در اين پروژه دو تقويت كننده سراميكي متفاوت (زيركن و زيركنيا) براي افزوده شدن به آلومينيم انتخاب شده اند.مقادير مختلف زيركن و زيركنيا در آلياژ A356.1توسط ريخته گري گردابي در دماي 750سانتيگراد افزوده شدند. اين تكنيك براي حصول به كامپوزيت همگن و شرايط انجماد بهتر انتخاب شد.ريزساختار نمونه ها توسط ميكروسكوپ التروني SEMمشاهده شد و تركيب شيميايي آنها توسط XRDاندازه گيري شد.آزمايش هاي مكانيكي و نيز فيزيكي(سختي سنجي، تعيين استحكام كششيو دانسيته) انجام شد. نتايج نشان داد كه بهترين شرايط زيركن در %5اتفاق مي افتد حال آنكه براي زيركنيا اين حالت در %15 اتفاق مي افتداما در همه حالات كامپوزيت حاوي زيركن داراي سختي بالاتري نسبت به كامپوزيت حاوي زيركونيا است.
مقدمه
به طور كلي مي توان كامپوزيت ها را به سه دسته اصلي تقسيم نمود: كامپوزيت هاي زمينه فلزي، كامپوزيت هاي زمينه پليمري و كامپوزيت هاي زمينه سراميكي. در اين ميان كامپوزيت هاي زمينه فلزي را ميتوان به عنوان دسته اي از مواد پيشرفته در نظر گرفت كه داراي وزن كم، استحكام بالا، مدول الاستيسيته زياد، ضريب انبساط حرارتي كم و مقاومت سايشي خوب ميباشند. معمولا تركيبي از اين خواص به تنهايي در يك ماده ساده يافت نميشود. هدف از ساخت مواد كامپوزيتي زمينه فلزي با استفاده از ذرات سراميكي، تركيب خواص مطلوب فلزات و سراميكها بوده است. افزودن ذرات ديرگداز مستحكم با مدول الاستيسيته بالا به زمينه فلزي منعطف، مادهاي را نتيجه ميدهد كه خواصي بينابين ذرات سراميكي و آلياژ زمينه داشته باشد. فلزات، تركيب خوبي از خواصي چون استحكام، انعطافپذيري و مقاومت در دماي بالا دارند ولي در برخي مواقع صلابت كمي داشته در حالي كه سراميكها ترد و مستحكم ميباشند. زيركونيا ماده ديرگدازي است كه دماي ذوب آن در حدود 2680ºCمي باشد. زيركونيا دارايخواص مناسبي از قبيل ضريب انبساط حرارتي بالا، پايداري در برابر شوك هاي حرارتي، نقطه ذوب بالا، هدايت حرارتي پايين، پايداري ترموديناميكي بالا و تشعشع بالا مي باشد.
ABSTRACT
Aluminum composite materials are very important engineering materials used in the transportation, aerospace and other applications. It is also due to low weight, high strength and better mechanical and physical properties compared to pure aluminum alloy. In this project, two different ceramic reinforcements (zircon and zirconia) were selected to be added to aluminum. Different amounts of zircon and zirconia were added to the alloy A356.1 by casting at 750 ° C. This technique was used to obtain homogeneous composite and freezing conditions. The structure of the samples was observed by SEM ultrasonic microscope and their chemical composition was measured by XRD. Mechanical and physical tests (hardness, tensile strength and density determination) were performed. The results showed that the best conditions for zircon are occurring at 5%, while for 15% zirconium, this state occurs in all cases of composite containing zircon having a higher hardness than zirconia composites.
INTRODUCTION
Generally, composites can be divided into three main categories: metal background composites, polymer composite and ceramic background composites. In this context, metal-based composites can be considered as a bunch of advanced materials that have low weight, high strength, high modulus of elasticity, low coefficient of thermal expansion and good abrasion resistance. Usually, a combination of these properties alone can not be found in a simple matter. The purpose of composite metal composite materials using ceramic particles was to combine the desired properties of metals and ceramics. The addition of solid refractory particles with a high modulus of elasticity to a flexible metal substrate results in a material that has the properties of ceramic particles and underlying alloys. Metals have a good mix of properties such as strength, flexibility and high temperature resistance, but in some cases they have little bearing, while the ceramics are crisp and firm. Zirconia is a refractory material with a melting point of about 2680ºC. Zirconia has good properties such as high expansion coefficient, thermal shock stability, high melting point, low thermal conductivity, high thermodynamic stability and high radiation.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Kamyar Shirvani Moghadam-Mohammad Amin Baghche Sarah-Hossein Abdi-Zadeh-Hamid Reza Baharvandi-Nasser Ehsani
File Information: persian Language/ 10 Page / size: 1.51 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : كاميار شيرواني مقدم -محمد امين باغچه سرا-حسين عبدي زاده -حميدرضا بهاروندي -ناصر احساني
اطلاعات فایل : زبان فارسی / 10صفحه / حجم : KB 1.51
نقد و بررسیها
هنوز بررسیای ثبت نشده است.