توضیحات
ABSTRACT
The Matlab/Simulink model of the Supergen (Sustainable Power Generation and Supply) Wind 5 MW xemplar wind turbine, which has been employed by a number of researchers at various institutions and Universities over the last decade, is reported. It is subsequently improved, especially in speed, to acilitate wind farm modelling, which usually involves duplicating wind turbine models. The improvement is achieved through various stages, including prewarping, discretisation using Heun’s method in addition to Euler method, and conversion to C. Results are presented to demonstrate that improvement in speed is significant and that the resulting wind turbine model can be used for wind farm modelling more fficiently. It is important to highlight that improvement in speed is achieved without compromising the omplexity of the turbine model; that is, each turbine included in a wind farm is neither simplified nor ompromised. The use of the wind farm model for testing a wind farm controller that has recently been introduced is also demonstrated.
INTRODUCTION
The 2016 statistic publication by WindEurope reports that there are 153.7 GW of installed wind energy capacity in the European Union. With such high penetration of wind power, the power generated by wind farms can no longer simply be that dictated by the wind speed. The power output of some wind turbines is already being curtailed . It will be necessary for wind farms to provide services to the grid including spinning reserve, frequency support and assistance with supply-demand matching, which could be achieved by the use of an appropriate wind farm controller. In order to design a wind farm controller, an efficient wind farm model, which can be executed fast and is detailed at the same time, needs to be developed { this is the main objective of the work presented in this paper.
چکیده
مدل ماتلوب / سیمولینک از توربین بادی 5 مگاواتی Windmill که توسط تعدادی از محققان در موسسات و دانشگاه های مختلف در دهه گذشته مورد استفاده قرار گرفته است گزارش شده است. پس از آن، به خصوص در سرعت، بهبود یافته است تا مدلسازی مزرعه باد، که معمولا شامل مدل سازی مدل های توربین باد است، کمک کند. بهبودی از طریق مراحل مختلف، از جمله پیش کشیدن، اختلال با استفاده از روش Heun به علاوه روش اویلر و تبدیل به C به دست می آید. نتایج نشان می دهد که بهبود سرعت قابل توجه است و مدل توربین بادی حاصل می تواند برای مزرعه باد استفاده شود مدل سازی به مراتب بیشتر. مهم است که برجسته شود که پیشرفت در سرعت بدون به خطر انداختن پیچیدگی مدل توربین به دست می آید؛ بدین معنی است که هر توربین شامل یک مزرعه باد هم ساده نیست و هم مصالحه شده است. استفاده از مدل مزرعه باد برای آزمایش کنترل کننده مزرعه باد که اخیرا معرفی شده است نیز نشان داده شده است.
مقدمه
انتشار آمار آماری 2016 توسط WindEurope گزارش می دهد که 153.7 GW ظرفیت انرژی باد نصب شده در اتحادیه اروپا وجود دارد. با چنین نفوذ زیادی از قدرت باد، قدرت تولید مزارع بادی دیگر نمی تواند به سادگی از سرعت باد رانده شود. قدرت خروجی بعضی از توربین های بادی در حال حاضر کاهش می یابد. برای مزارع باد نیاز به ارائه خدمات به شبکه از جمله رزرو نخ ریسی، حمایت فرکانس و کمک با تطبیق تقاضای عرضه، که می تواند با استفاده از یک کنترلر مزرعه باد مناسب به دست آورد. برای طراحی یک کنترلر مزرعه باد، یک مدل مزرعه بادی کارآمد که می تواند به سرعت اجرا شود و در همان زمان دقیق باشد، باید توسعه یابد (این هدف اصلی کار ارائه شده در این مقاله است.
Year: 2018
Publisher : ELSEVIER
By : S. Hur
File Information: English Language/ 26 Page / size: 1.41 MB
سال : 1396
ناشر : ELSEVIER
کاری از : S. Hur
اطلاعات فایل : زبان انگلیسی / 26 صفحه / حجم : MB 1.41
نقد و بررسیها
هنوز بررسیای ثبت نشده است.