توضیحات
ABSTRACT
In this paper, we present the result of investigations pertaining to the development of floating type photovoltaic energy generation system. For the floating structure, durable and light-weight materials such as a pultruded FRP composite material are essential. Pultruded FRP has superior mechanical properties and excellent corrosion–resistance compared with those of conventional structural materials. In the paper, we discussed the development concepts of the floating type photovoltaic energy generation system briefly. The mechanical properties of the FRP structural member used in the structural system are investigated through the tensile and shear tests. Test results are used in the finite element analysis and design of the system. Link system which is composed of pultruded FRP, used tire, and PE rope is also analyzed by the finite element method. Finally, floating type photovoltaic energy generation system is designed, fabricated, and installed successfully at the sea site in Korea. In addition, the energy production of floating PV energy generation system is measured and compared with that of land type plant. Energy productions of floating type from June to August are significantly higher, but the energy productions from September to October are lower.
INTRODUCTION
Recently, environmental problems associated with the excessive use of fossil fuel are issued throughout the world. Enforcement of the Kyoto protocol ensures that renewable, sustainable energy sources are a priority for national governments (Hollaway, 2013). As an alternative energy resource, the importance of renewable energy is continuously rising. Moreover, the demands for facilities to generate renewable energy are also rising. To satisfy such demands, a large number of photovoltaic (PV) energy generation systems is constructed and planned in a large scale. However, since these facility zones are mostly located on land, some problems such as an increase in total construction cost due to high cost of land use, environmental disruption such as devastation of ecological system have occurred. To solve or mitigate such problems, floating type PV energy generation system is studied and developed (Nam, 2010).
چکیده
در این مقاله، ما نتیجه تحقیقات مربوط به توسعه سیستم تولید انرژی فتوولتائیک شناور را ارائه می دهیم. برای ساختار شناور، مواد با دوام و سبک وزن مانند مواد کامپوزیتی FRP پودرودید ضروری هستند. FRP Pultruded داراي خواص مکانیکی عالی و مقاوم در برابر خوردگی بسیار عالی در مقایسه با مواد ساختاری متداول است. در مقاله، ما در مورد مفاهیم توسعه ی سیستم تولید انرژی فتوولتائیک نوع شناور به طور خلاصه صحبت کردیم. خواص مکانیکی ساختار FRP مورد استفاده در سیستم ساختاری از طریق تست کششی و برش مورد بررسی قرار می گیرد. نتایج آزمایش ها در تجزیه و تحلیل عناصر محدود و طراحی سیستم استفاده می شود. سیستم پیوند که از FRP pultruded تشکیل شده است، استفاده از تایر و PE طناب نیز توسط روش المان محدود شده است. در نهایت، سیستم تولید انرژی فتوولتائیک شناور، طراحی شده، ساخت و نصب شده با موفقیت در سایت دریایی کره است. علاوه بر این، تولید انرژی سیستم تولید انرژی PV شناور اندازه گیری شده و با نوع کارخانه زمین مقایسه می شود. تولید انرژی نوع شناور از ماه ژوئن تا اوت به میزان قابل توجهی بالاتر است اما تولید انرژی از سپتامبر تا اکتبر کمتر است.
مقدمه
به تازگی، مشکلات زیست محیطی در ارتباط با استفاده بیش از حد از سوخت های فسیلی در سراسر جهان صادر شده است. اجرای پروتکل کیوتو تضمین می کند که منابع انرژی پایدار تجدید پذیر، برای دولت های ملی یک اولویت هستند (Hollaway، 2013). به عنوان یک منبع انرژی جایگزین، اهمیت انرژی تجدید پذیر به طور مداوم افزایش می یابد. علاوه بر این، تقاضای تسهیلات برای تولید انرژی تجدید پذیر نیز افزایش می یابد. برای برآوردن چنین خواسته ها، تعداد زیادی از سیستم های تولید انرژی فتوولتائیک (PV) ساخته و برنامه ریزی شده در مقیاس وسیع است. با این حال، از آنجا که این مناطق تسهیلات بیشتر در زمین قرار دارد، برخی از مشکلات مانند افزایش هزینه کل ساخت و ساز به علت هزینه بالای استفاده از زمین، اختلال در محیط زیست مانند ویرانی سیستم زیست محیطی رخ داده است. برای حل و مقابله با چنین مشکلی، سیستم تولید انرژی PV نوع شناور مورد مطالعه و توسعه است (Nam، 2010).
Year: 2014
Publisher : ELSEVIER
By : Young-Geun Lee , Hyung-Joong Joo , Soon-Jong Yoon
File Information: English Language/ 15 Page / size: 1.11 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1393
ناشر : ELSEVIER
کاری از : Young-Geun Lee , Hyung-Joong Joo , Soon-Jong Yoon
اطلاعات فایل : زبان انگلیسی / 15 صفحه / حجم : KB 1.11
نقد و بررسیها
هنوز بررسیای ثبت نشده است.