توضیحات
ABSTRACT
The purpose of the Manual for Asphalt Materials and Mix Design (hereafter referred to as The MANUAL) is to familiarize students with the technology of asphalt in its several forms namely asphalt cement, cutback asphalt, and asphalt emulsions. The laboratory work is designed to develop an understanding of asphalt properties, characteristics, testing procedures, and specifications. For engineering purposes three properties of asphalt are paramount: consistency (usually referred to as viscosity), purity, and safety. Before asphalt cement can be used for construction purposes it must be liquefied. This implies heating. Asphalt cement must be liquefied before it can be pumped through pipes, mixed with aggregates to make asphalt concrete, or sprayed through nozzles. Once the heat is dissipated, the asphalt cement reverts to its amorphous, semi- solid state. There are other ways to liquefy asphalt. Selected petroleum based solvents can dissolve the asphalt cement to create a family of materials known as cutback asphalts. Another method is to combine asphalt cement with water in the presence of a catalyst to form various kinds of asphalt emulsions. The procedures outlined herein are all derived from ASTM designations and practice as recommended by the Asphalt Institute. Where the particular ASTM method permits alternate rocedures, the one more applicable to the available equipment and the teaching situation was chosen. In the preparation of this MANUAL, the inherent time constraints of an academic laboratory was considered, whenever possible.
INTRODUCTION
Asphalt is by no means a product of our modern civilization which is attested by the fact that remains of saber-tooth tigers and other prehistoric animals have been found in the La Brea Tar Pits in Los Angeles. In reality, these so-called “tar pits” are deposits of natural asphalt. The first recorded use of asphalt dates back to 3800 B. C. in Mesopotamia where the material was used as an adhesive mortar for building stones and paving blocks. Reservoirs, canals, and bathing pools constructed with these blocks were made watertight with this material found in natural deposits in the region. Asphalt was first used in paving in the middle of the nineteenth century. Natural deposits of rock asphalt from the Rhone Valley in France served as the source for this construction.
چکیده
هدف راهنماي مواد آسفالتي و طراحي مخلوط (در ادامه به عنوان MANUAL اشاره مي شود) دانش آموزان با استفاده از فناوري آسفالت در قالب هاي مختلفي از جمله آسفالت آسفالت، آسفالت آسفالتي و امولسيون آسفالت آشنا هستند. کار آزمایشگاهی برای توسعه درک خواص آسفالت، ویژگی ها، روش های آزمایش و مشخصات طراحی شده است. برای اهداف مهندسی سه ویژگی آسفالت اهمیت دارد: سازگاری (معمولا به عنوان ویسکوزیته)، خلوص و ایمنی اشاره می شود. قبل از سیمان آسفالت می تواند برای اهداف ساختمانی مورد استفاده قرار گیرد باید آن را مایع سازد. این به معنی گرم شدن است سیمان آسفالت قبل از اینکه بتواند از طریق لوله ها، مخلوط با سنگدانه ها برای ساخت بتن آسفالت، یا اسپری از طریق نازل ها، مایع شود. هنگامی که گرما از بین می رود، سیمان آسفالت به حالت آمورف و نیمه جامد تبدیل می شود. راه های دیگری برای آسفالت مایع وجود دارد. انتخاب حلال های نفتی مبتنی بر این می تواند سیمان آسفالت را برای ایجاد یک خانواده از مواد شناخته شده به عنوان آسفالت های بریده حل کند. روش دیگر این است که ترکیب سیمان آسفالت با آب را در حضور یک کاتالیزور برای ایجاد انواع مختلف امولسیون های آسفالت. مراحل ذکر شده در اینجا همه از ملاحظات ASTM و عمل است که توسط موسسه آسفالت توصیه می شود. در جایی که روش ASTM خاص اجازه می دهد مجوز های متناوب، یکی دیگر قابل اجرا برای تجهیزات موجود و وضعیت آموزشی انتخاب شده است. در تهیه این MANUAL، زمانی که ممکن است محدودیت زمان ذاتی یک آزمایشگاه دانشگاهی مورد توجه قرار گیرد.
مقدمه
آسفالت به هیچ وجه محصولی از تمدن مدرن ما نیست که این واقعیت تایید شده است که بقایای ببرهای دندانی و دیگر حیوانات ماقبل تاریخ در لبه های شکسته La Brea در لس آنجلس یافت شده است. در واقع، این به اصطلاح “چاله های قیر” رسوبات آسفالت طبیعی است. اولین استفاده ثبت شده از آسفالت به 3800 ب. سی. در بین النهرین که در آن مواد به عنوان یک ملات چسب برای ساخت سنگ و بلوک سنگ فرش استفاده می شود. مخازن، کانال ها و استخر های حمام که با این بلوک ها ساخته شده است، با این ماده در رسوبات طبیعی منطقه مورد استفاده قرار می گیرند. آسفالت برای اولین بار در اواسط قرن نوزدهم مورد استفاده قرار گرفت. ذخایر طبیعی آسفالت سنگی از دره رون در فرانسه به عنوان منبع برای این ساخت و ساز خدمت کرده است.
Year: 2016
Publisher: NOYES
By : Irvin gKett
File Information: English Language/ 261 Page / size: 8.20 MB
Only site members can download free of charge after registering and adding to the cart
سال : 1395
ناشر : NOYES
کاری از : ایروین gKett
اطلاعات فایل : زبان انگلیسی / 261 صفحه / حجم : MB 8.20
نقد و بررسیها
هنوز بررسیای ثبت نشده است.