توضیحات
چکیده
زنجيره تامين با مراحلي شامل فروشندههاي مواد خام، توليد و سيستم هاي مونتاژ و مراکز توزيع، تعريف مي شود. طراحي عملياتي و کنترل مستقيم شبکه دراصل بوسيله روشهاي گوناگوني چون مدلهاي تحليلي قطعي، مدلهاي تحليلي تصادفي و مد سازي جفت هاي شبيه شده با معيارهاي بهينه سازي مطلوب و اندازه گیری هاي عملکرد شبکه مشخص مي شود. در اين مقاله موجودی رده های زنجيره تامين تحت تغييرات تقاضا با مبتني بر مدل بين کننده پيش روش کنترل با استفاده از يک مدل تفاضلی کنترل مي شود. همچنين يک بخش توقيف حرکت که سرعت تغيير در کميته اي منتقل شده از طريق شبکه را جريمه مي کند مقاومت سيستم کنترلي را افزايش مي دهد. در حقيقت در اين پژوهش سعی بر اين است که از يک مدل مناسب از يک سيستم زنجيره تامين استفاده کردن و تابعي معيار متناسب با اهداف سيستم، يعني برآورده تقاضاي مشتري و بالابردن مقاومت سيستم کنترلي از طريق زنجيره تحت تغييرات تقاضا، را تشکيل دهيم .
مقدمه
زنجیره تامین با مراحلی شامل فروشنده های مواد خام , تولید (کارخانه) و سیستم های مونتاژ و مراکز توزیع تعریف می شود.طراحی عملیاتی و کنترل مستقیم شبکه در اصل بوسیله روش های گوناگونی چون مدل های تحلیلی قطعی ,مدل های تحلیلی تصادفی و مدل های شبیه سازی جفت شده با معیارهای بهینه سازی مطلوب و اندازه گیری های عملکرد شبکه , مشخص می شود. سیستم های مدیریت زنجیره تامین غالبا توسط کنترل کننده های کلاسیک PID به صورت متمرکز و غیر متمرکز کنترل شده اند مه برخی از آنها دیده می شوند.
ABSTRACT
The supply chain is defined in stages, including raw material vendors, production, assembly systems and distribution centers. Operational design and direct control of the network are fundamentally determined by various methods such as definitive analytical models, randomized analytic models, and simulation of pairing mode with optimal optimization criteria and network performance measurements. In this paper, inventory of supply chain categories is controlled by demand variations based on the pre-controller’s intermediate model using a differential model. Also, a movement detonation unit that penalizes the change in a committee transmitted through the network increases the resistance of the control system. In fact, in this research, we try to use a suitable model of a supply chain system and to set up a criterion function proportional to the goals of the system, that is to satisfy the customer demand and to increase the resistance of the control system through the chain under demand variations.
INTRODUCTION
The supply chain is defined in stages involving raw material vendors, manufacturing plants, and assembly and distribution systems. Operational design and direct network control are principally provided by various methods such as definitive analytical models, randomized analytic models, and models Coupled simulation is characterized by optimal optimization criteria and network performance measurements. Supply chain management systems are often controlled centrally and centrally by classic PID controllers, some of which are seen.
Year: 2010
Publisher : Eighteenth International Energy Conference of Iran
By : Mohammad Miran Beigi, Ali Akbar Jalali
File Information: persian Language/ 6 Page / size: 592 KB
سال :1389
ناشر : هجدهمین کنفرانس بین المللی برق ایران
کاری از : محمد میران بیگی, علی اکبر جلالی
اطلاعات فایل : زبان فارسی / 6 صفحه / حجم : KB 592
نقد و بررسیها
هنوز بررسیای ثبت نشده است.