توضیحات
چکیده
در اين مقاله ، يك نمونه دوپلكسر توان بالا كه براي كاربرد در سيستم IFFطراحي و ساخته شده است ، ارائه مي گردد . اين مدار بر اساس طرحي جديد از مدار هاي مايكرواستريپ و ديودهاي PINطراحي گرديده است و قابليت تحمل توان تا 2KWرا به صورت پالسي دارا مي باشد. افت توان در مسير فرستندگي حداكثر 0.2dBو در مسير گيرندكي كمتر از 2dBاست. ايزولاسيون مسير فرستنده و گيرنده بيش از 25dBبوده و دامنه ي نشت اسپايك هاي سوئيچينگ ديودهاي PINدر گيرنده بسيار ناچيز است .
مقدمه
در گيرنده ، فرستنده هاي RFبه علت استفاده از تنها يك آنتن جهت انتقال توان از فرستنده به آنتن و از آنتن به گيرنده ، از دوپلكسر براي دستيابي به ايزولاسيون مناسب بين مدارات فرستنده و گيرنده استفاده مي شود. دوپلكسر ها در جاهاي مختلفي از جمله رادار و مخابرات كاربرد دارند . افزايش روزمره ي نياز به سيستم هاي فوق الذكر ، درخواست براي دوپلكسر هايي با كارآيي مناسب از نظر افت توان ، ايزولاسيون خوب و تحمل توان در پهناي باند فركانسي مورد نظر را مي طلبد كه علاوه برشرايط ذكر شده ، با حجم كم و قيمت مناسب طراحي شده باشند. يك دوپلكسر از نظر الكتريكي وسيله اي است كه با استفاده از مدارهاي تشديد تنظيم شده با Qبالا و پهناي باند كوچك ، سيگنال فرستنده و گيرنده را از يكديگر جدا ساخته و سيگنال هاي ناخواسته را حذف مي كند. دوپلكسر ها با تكنيك هاي متفاوت و در انواع مختلف طراحي و ساخته مي شوند. به عنوان مثال ساخت با استفاده از موجبرها Dielectric ، استفاده از Composite Ferrite ، مواد ، Resonatorخطوط مايكرواستريپ و يا SAWفيلترها كه با وجود پيچيدگي تكنولوژي ساخت ، همچنان رو به گسترش هستند .
ABSTRACT
In this paper, a high-power duplexer sample designed and developed for use in the IFF system is presented. This circuit is based on a new design of microscope circuits and PIN diodes, and has a pulse power output of up to 2KW. The power drop in the transmission path is at most 0.2dB and in the direction of the gateway is less than 2dB. The transmitter and receiver’s isolation is more than 25dB, and the switching spike spike amplitude of the diodes in the receiver is very small.
INTRODUCTION
In the receiver, RF transmitters are used by the duplexer to achieve proper isolation between transmitter and receiver circuits, due to the use of only one antenna to transmit power from the transmitter to the antenna and from the antenna to the receiver. Duplexers are used in many places, including radar and telecommunications. Increasing the daily need for the aforementioned systems requires the use of suitable duplexers in terms of power failure, good isolation and power tolerance in the desired frequency bandwidth, which, in addition to the specified conditions, is designed with a low volume and reasonable price. To be An electric duplexer is a device that, by using resonant circuits with high Q and low bandwidth, separates the sender and receiver signals from each other and eliminates unwanted signals. Duplexers are designed and built with different techniques and in different types. For example, using dielectric waveguides, using Composite Ferrite, materials, microscope lines resonators, or SAW filters, which are still expanding despite the complexity of technology.
Year: 2010
Publisher : Eighteenth International Energy Conference of Iran
By : Reza Karimzadeh Mazi, Ali Nasr Azadani, Farhad Khosravi, Hamid Mir Mohammad Sadeghi
File Information: persian Language/ 6 Page / size: 1.09 MB
سال :1389
ناشر : هجدهمین کنفرانس بین المللی برق ایران
کاری از : رضا كريم زاده جزي ،علي نصر آزاداني ، فرهاد خسروي ، حميد مير محمد صادقي
اطلاعات فایل : زبان فارسی / 6صفحه / حجم : MB 1.09
نقد و بررسیها
هنوز بررسیای ثبت نشده است.