توضیحات
چکیده
رفتار روانكاري در شرايط خشك از تركيب متراكم Ti3SiC2با انجام آزمون پين روي ديسك تحقيق . شد بدين منظور ابتدا به روش سنتز احتراقي همراه با پرس ايزواستاتيك تركيب Ti3SiC2ساخته شد. بررسي هاي ريز ساختار با استفاده از ميكروسكوپ الكتروني روبشي مجهز به آشكارساز EDSو ميكروسكوپ نوري و مطالعات تكميلي تشخيص فازي با استفاده از پراشگر اشعه ايكس انجام گرديد. آزمون سايش به روش پين روي ديسك و ماكرو سختي سنجي با دستگاه سختي سنج اونيورسال انجام گرديد. آناليز اشعه ايكس نشان داد مقدار جزئي از فازهايي مانند … SiC ،TiCو در نمونه Ti3SiC2وجود دارد. نتايج آزمون سايش نشان داد با توجه به ضريب اصطكاك كم( >0/12)در بار اعمالي كمتر از200 نيوتن، اين تركيب مي تواند همانند گرافيت به عنوان روانكار جامد، حتي در دماي بالا به كار رود.
مقدمه
تركيب سه تايي از تيتانيم، سيليسيم و كربن بصورت (Ti3SiC2) به علت داشتن چندين خصوصيت خوب از جمله هدايت حرارتي و الكتريكي عا لي، قابليت ماشين كـاري آسـان، چقرمگـي عـالي در دمـاي بـالا، مقاومت به شوك حرارتي خوب و مقاومت به اكسيداسيون در دماي بـالا بسـيار مـورد توجـه بـوده اسـت. گرچه سختي آن كمتر از SiCاست ولي گزينهاي خوب براي كار در دماي بالا است . خصوصيات Ti3SiC2مربوط به ساختار لايه اي آن است كه مانند گرافيت و MoSi2سـاختار هگزاگونـال دارد، كه شامل لايه هاي صفحه اي Siهمراه با لايه Tiفشـرده نزديـك بـه هـم كـه اتـم هـاي كـربن را در مكان هاي اكتاهدرال در بر گرفته است. روش هاي رسوب شيميايي بخار به صورت پوشش لايه نازك و قطعه متـراكم بوسـيله پـرس گـرم، پـرس ايزو استاتيك گرم، واكنش حالت جامد، فشار بالا- دما بالا، سنتز خود انتشاري دمـاي بـالا و ذوب قوسـي براي توليد تركيب سه تايي خالص Ti3SiC2توسعه پيدا كـرده انـد. مخلـوط هـاي Si ،SiCl4 ،H2 ،TiCl4 ، SiC ،Tiو كربن يا گرافيت براي توليد آن كاربرد دارند. مزيت روش سنتز احتراقي نسبت به سـاير روشهاي توليد تركيبات مختلف شامل انرژي مصرفي كم، سادگي نسبي فرايند و تجهيزات، خلوص بالاي محصولات، زمان كم فرايند و قيمت كم است . در واكنش سنتز احتراقي، از حرارت آزاد شده ناشي از واكنش شيميايي بين مواد اوليه جهت پيشبرد واكنش استفاده مي شود.
ABSTRACT
The lubrication behavior in dry conditions of the Ti3SiC2 condensation composition by performing a pin test on the disc. For this purpose, Ti3SiC2 was first synthesized by combustion synthesis with isostatic press. Microstructural studies were performed using a scanning electron microscope equipped with an EDS detector and a light microscope and complementary fuzzy diagnostic tests using X-ray diffraction. The abrasion test was performed using a pin-disc and macroscopic hardness test with an oversized hardness device. X-ray analysis showed that there is a small amount of phases such as SiC, TiC and Ti3SiC2. The results of abrasion test showed that with low coefficient of friction (> 0.12) at less than 200 nautical load, this compound can be used as solid lubricant, even at high temperature, as graphite.
INTRODUCTION
A combination of three titanium, silicon and carbon (Ti3SiC2) compounds due to several good properties including thermal and electrical conductivity, easy machining ability, excellent toughness at high temperatures, good thermal shock resistance and oxidation resistance at temperature The above has been very much appreciated. Although its hardness is less than SiC, it is a good option for working at high temperatures. The properties of Ti3SiC2 are related to its layered structure, which, like graphite and MoSi2, has a hexagonal structure, which includes Si plate layers with a closely spaced Ti layer that covers carbon atoms in octahedral locations. Vapor deposition methods have been developed as a thin layer coating and a dense part by hot pressing, isostatic hot press, solid state reaction, high pressure-high temperature, high temperature self-propagation synthesis and arc melting for the production of pure Ti3SiC2 tri-composition. . Mixtures of Si, SiCl4, H2, TiCl4, SiC, Ti and carbon or graphite are used for its production. The advantages of the combustion synthesis method over other methods of producing different compounds include low energy consumption, relative simplicity of process and equipment, high purity of products, low process time and low prices. In the combustion synthesis reaction, the released heat is due to the chemical reaction between the raw materials to advance the reaction.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Mohammad Bagheri Rehaei, Seyyed Khatib al-Islam Sadrnejad, Mohammad Reza Rahimipour
File Information: persian Language/ 10 Page / size: 774 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : محمد باقر رهائي ،سيد خطيب الاسلام صدرنژاد ،محمدرضا رحيمي پور
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 774
نقد و بررسیها
هنوز بررسیای ثبت نشده است.