توضیحات
چکیده
در اين كار پژو فاکتورهاي مختلف از جمله تاثير زمان آبكاري، pHحمام، ضـخامت، درصـد فسـفر شـش موجـود در پو و شـرايط عمليـات حرارتـي بـر رفتـار خـوردگي الکتروشـيميايی پوششـهاي آبکـاري لس الکترو نيکل-فسفر مورد بررسي و با نمونه هاي مشابه از طريق خوردگي غوطه وری مقايسـه گرديـد . منحني هـا و نتـايج پارامترهـاي خـوردگي نظيـر دانسـيته جريـان خوردگي،مقاومـت پلاريزاسيون،پتانسـيل وسرعت خوردگي براي نمونه های بـا عمليـات حرارتـی و بـدون عمليـات حرارتـی در زمانهـاي مختلـف آبکاري از طريق منحني های تافل در نمونه محلول شبه آب دريا ( %۳/ ۵NaCl) تحـت شـرايط هـوادهي بدست آمد.ساختار و مورفولوژي سـطح ايـن پوششـها نيـز توسـط طيـف پـراش اشـعه xو ميکروسـکوپ فت الکترونی روبشی مورد مطالعه و ارزيابی قرار گر .نتايج بدست آمده از رفتار خـوردگي الکتروشـيميايي و ميکروسکوپ الکتروني نشان مي دهد در نمونه هاي عمليات حرارتي شده خوردگي کاهش يافته است. همچنين در نمونه هاي عمليات حرارتي و بدون عمليات حرارتي در زمانهای ۱/۵و ۲سـاعت آبکـاری بـه ترتيب با ترکيب درصد Ni-11.1%Pو Ni-10.6%Pسرعت خـوردگي کـاهش يافتـه و در عـوض در نمونه های با زمانهای ۲/۵و ۳ساعت آبکاری به ترتيب با ترکيب درصـد Ni-9.9%Pو Ni-9.1%P خوردگی افزايش يافته و يک خوردگي در مرز مشـترک و از نـوع بـين دانـه اي مشـاهده شـد. خـوردگي غوطه وری نمونه ها در مدت چهار ماه نيز مطابقت خوبي با آزمايشات الکتزوشيميايي نشان مي دهد.
مقدمه
خوردگي يكي از مهمترين عوامل استهلاك قطعات و يكي از معضلات عمده صنعت ميباشد، بطوريكـه امروزه صنايع مختلفي با آن مواجه هستند. اثرات ناشي از خوردگي شامل كاهش كيفيت ظاهري قطعـات، ينــه افــزايش هزينــه عمليــات، نيــاز جــايگزيني تجهيــزات و هز نگهــداري اضــافي زيانهــايي را بــراي دستاندركاران صنايع فراهم آورده است. با توسعه پوششهاي حاصل از آبكاري بدون برق مشكل مربوط به تخلخل پوششها تا حدود زيادي بر طرف گرديده است. پوششهاي آبكـاري بـدون بـرق نيكـل – فسـفر داراي مزيتهاي زيادي بوده از جمله مزاياي آنها مي توان به ضخامت يكنواخت، توانائي توليد پوششـي بـا مقاومت خوردگي بالا، سختي و مقاومت سايشي مناسب و قابليت پوشش دادن اكثر مواد شامل پليمرهـا و پلاسـتيكها اشـاره كـرد. مقاومـت خـوردگي پوششـهاي مـورد نظـر را مـيتـوان بـا انتخـاب صـحيح فاكتورهايي همچون ضخامت پوشش، درصد فسفر و انتخاب صحيح حمام تغيير داد. مقدار فسـفر موجـود كل در پوششهاي بدون برق نيکل- فسفر در حمام اسيدي هيپوفسفيت بستگي به شيمي حمام و شرايط كـاري آن دارد.
ABSTRACT
In this work, various factors such as the effect of watering time, bath pH, thickness, the percentage of P-6 in the boiler and the heat treatment conditions on the electrochemical corrosion behavior of the electro-nickel-phosphate coatings were investigated and compared with similar specimens by immersion corrosion. It turned out. Curves and results of corrosion parameters such as corrosion current density, polarization resistance, potential and corrosion rate for heat-treated and non-heat treatment samples at different times of plating through the TOEFL curves in a sample of sea water equivalent (3.5 NaCl) under conditions Aeration was obtained. The structure and surface morphology of these coatings were studied and evaluated by X-ray diffraction spectrum and scanning electron microscopy. The results of electrochemical corrosion behavior and electron microscopy show that corrosion has been reduced in the heat treatment samples . Also, in thermal and non heat treatment samples at 1.5 and 2 hours of electroplating, the corrosion rate decreased with Ni-11.1% P and Ni-10.6%, respectively, while in samples with 2.5 and 3 hours of electroplating, respectively, Ni -9.9% P and Ni-9.1% P corrosion were increased and corrosion was observed at the common boundary and intergranular type. The immersion corrosion of the specimens in the course of four months also corresponds to the electrochemical experiments.
INTRODUCTION
Corrosion is one of the most important factors in the depreciation of parts and is one of the main problems of the industry, so today there are various industries facing it. Corrosion-related effects include lowering the apparent qualities of the parts, increasing operating costs, replacing equipment, and providing additional maintenance for losses incurred by industry players. With the development of non-electric coatings, the problem of porosity of coatings has been largely overcome. Nickel-phosphorous electroplating coatings have many advantages, including the advantages of uniform thickness, the ability to produce coating with high corrosion resistance, hardness and abrasion resistance, and the ability to cover most materials, including polymers and plastics. The corrosion resistance of the coatings can be changed by choosing the correct factors such as coating thickness, percentage of phosphorus and proper choice of bath. The total amount of total phosphorus in nickel-phosphorous coatings in an acid bath of hypophosphate depends on the chemistry of the bath and its working conditions.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Seyed Hossein Rafizadeh – Habib Ashayati Sorkhi
File Information: persian Language/ 12 Page / size: 320 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : سيد حسين رفيع زاده -حبيب اشعثي سرخابي
اطلاعات فایل : زبان فارسی / 12 صفحه / حجم : KB 320
نقد و بررسیها
هنوز بررسیای ثبت نشده است.