توضیحات
چکیده
در اين تحقيق تاثير زمان عمليات پيرسختي بر رفتـار سوپرالاسـتيك آليـاژ NiTiبـا تركيـب ،51 at.% Ni مورد مطالعه قرار گرفته است. پس از عمليات آنيل محلولي در 850 °Cبه مدت 30دقيقه و كـوئنچ در آب، عمليات پيرسختي برروي نمونه ها در دماي 400 °Cه بـ مـدت زمـان هـاي 60 ،30 ،20 ،10و 120دقيقـه انجام شد. آزمايشات كالريمتري DSCبه منظور تعيين دماهـاي تغييـر حالـت هـاي مـارتنزيتي و آزمايـشات كشش براي مشخص كردن رفتار سوپرالاستيك نمونه ها انجام گرديد. جهت شناسـايي فازهـا از تفـرق اشـعه ايكس XRDاستفاده شده است. نتايج DSCنشان مي دهد كه با افزايش زمـان پيرسـختي دماهـاي اسـتحاله هاي فازي، افزايش مي يابند. همچنين پس از انجام عمليات پيرسختي استحاله هاي مـارتنزيتي بـا گـذر از فـاز مياني Rدردو مرحله رخ مي دهند. نتايج آزمايشات كشش نشان مي دهدكه هم تنش Plateauبالايي و هم تنش Plateauپاييني، به آرامي با افزايش زمان پيرسختي، كاهش مـي يابنـد و دردمـاي پيرسـختي ،400 °C بهينه ترين زمان پيرسختي جهت به حداقل رساندن كرنش باقي مانده پس ازحذف تنش 30دقيقه بدست آمد.
مقدمه
آلياژهاي حافظه دار ً اصطلاحا به آلياژهايي اطلاق مي شود كه توانايي به ياد آوردن شكل قبلي خود را پس از تغيير شكل زياد، داشته باشند. خواص منحـصر بـه فـرد ايـن آلياژهـا بـه دليـل وقـوع اسـتحاله هـاي مـارتنزيتي ترموالاستيك مي باشد. چنين استحاله هايي ممكن است در اثر تغييرات دمايي، يـا در اثـر اعمـال تـنش (و يـا حذف تنش) در آلياژ اتفاق بيافتند. در آلياژهاي NiTiآستنيت، فاز دما بالا، با ساختار كريستالي B2در حين سرد كردن به مارتنزيت، فاز دما پايين، با ساختار كريستالي مونوكلينيك ‘ B19تبديل مشود. در حين گـرم كردن استحاله معكوس از مارتنزيت به آستنيت رخ مي دهد. در برخي موارد اين استحاله طي دو مرحله اتفاق مي افتد، يعني در حين سرد كردن ابتدا آستنيت به فاز Rبا ساختار كريستالي تري گونال تبديل شده و سـپس فاز Rبه مارتنزيت تبديل مي شود. وقتي آلياژ حافظه دار NiTiدر نزديكي دماي A fتحت تنش قرار مي گيرد از خود رفتار سـوپر الاسـتيك (يا شبه الاستيك) نشان مي دهد. رفتار سوپر الاستيك به رفتاري اطلاق مي شود كه ماده توانايي برگشتن بـه شكل اوليه خود (بعد از حذف تنش) ، را داشته باشد.
ABSTRACT
In this research, the effect of durability of operation on superconductive behavior of NiTi alloy with a composition of 51 at.% Ni was studied. Following annealing at 850 ° C for 30 minutes and quenching in water, the procedure was performed on samples at 400 ° C for 60, 30, 20, 10 and 120 minutes. DSC calorimetric tests were performed to determine the temperatures of the martensitic states and tensile tests to determine the superallastic behavior of the samples. X-ray diffraction has been used to identify the phases. The results of DSC show that increasing the fatigue degradation time will increase with increasing durability. Also after martial arc transition, the martensitic transformations occur through the middle phase of R in two stages. The results of tensile tests indicate that both the upper Plateau stress and the lower Plateau stress decrease slowly with increasing lift time, and at 400 ° C, the optimum durability time was reached to minimize the remaining strain after 30 min tensile removal.
INTRODUCTION
Memory alloys are referred to as alloys that have the ability to remember their previous shape after a large change. The unique properties of these alloys are due to the occurrence of thermoelastic martensitic transformations. Such deformations may occur due to temperature variations, or due to stress (or removal of stress) in the alloy. In NiTi austenite alloys, high temperature phase, with crystalline structure B2, during crystallization, low temperature phase, converted to crystalline monoclinic structure B19. During heating, the inverse transformation of martensite occurs to austenite. In some cases, this transformation occurs during two steps, that is, during a cooling down, austenite is converted to the R phase with a crystalline trigonal structure, and then the R phase becomes martensite. When a NiTi memory alloy is placed near stress A f, it exhibits super elastic behavior (or quasi-elastic behavior). Superelastic behavior refers to behavior that the substance has the ability to return to its original form (after elimination of tension).
Year: 2017
Publisher : 11th National Congress of metallurgy of Iran
By : Raza Hadad Badar and Jafar Khalil alias
File Information: persian Language/ 10 Page / size: 328 KB
سال : 1396
ناشر : يازدهمين كنگره ملي مهندسين متالوژی ايران
کاری از : رضا حداد بدر و جعفر خليل علافي
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 328
نقد و بررسیها
هنوز بررسیای ثبت نشده است.