توضیحات
چکیده
فريت باريم با تركيب BaFe12−x (Mn0/ 5Co0/ 5Ti) /x 2O19به روش حالت جامـد تهيـه شـد. فريـت هـا داراي دانه هاي هگزاگونال شكل و بدون ناخالص مي باشند. فريت هاي تهيه شده با پلي مـر پلـي وينيـل كلرايد به نسبت وزني 80به 20مخلوط شد تا اينكه ماده مركب فريت – پلي مـر تهيـه شـد. آزمايـشهاي VSM ،SEM ،XRDو جذب توسط دستگاه vector network analyzerبر روي نمونـه هـاي تهيـه شده انجام شد. نتايج آزمايشها نشان مي دهد كه ساختار نوع Mو بدون حـضور فـاز ثانويـه در فريـت هـا تشكيل شد. همچنين نمونه هاي حاوي مقدار بالاتر سـطح زيـر منحنـي هيـسترزيس، ميـدان پـسماند زدا و نفوذپذيري مغناطيسي داراي تلفات مغناطيسي بيشتري مي باشد. تحقيقات انجـام شـده مـشخص کرد كـه فريت BaFe12−x (Mn0/ 5Co0/ 5Ti) x/ 2 O19با ( x= 2 )مي تواند به عنـوان يـك جـاذب پهـن بانـد در فركانس هاي بالاتر از 15GHzعمل كند ميزان جذب در بعضي از فركانسها بيشتر از −25dBمي باشد. اين موضوع نشان مي دهد كه با كنترل تركيب شيميايي فريت و با فزودن عناصر آلياژي فركانس تـشديد فريت باريم از 48GHzبه فركانسهاي رديف باند Kuكاهش مي يابد.
مقدمه
با پيشرفت تكنولوژي رادار و ارتباطات مايكروويو نياز به ساخت مواد مناسب جهت اختفاء ادوات راداري افزايش يافت. تحقيقات وسيعي در مورد ساخت قطعات جاذب رادار در باندهاي فركانسي مختلف منتـشر شده است .براي جذب مناسب امواج الكترومغناطيس در مواد جاذب رادار بايـد امپـدانس ذاتـي ماده جاذب با امپدانس ذاتي هوا يكسان باشد. فريت هاي اسپينلي بعلت كوچك بودن مؤلفه مـــوهومي نفوذپذيري مغناطيسي در فركانسهاي مايكروويو نمي توانند بعنوان جاذب امواج الكترومغناطيسي در باندهاي فركانسي رديف مايكروويو عمـل كننـد. برخلاف فريت هاي اسـپينلي و لعـل هـا، فريـت هـاي هگزاگونـال نـوع Mجـاذب مناسـبي بـراي امـواج مي باشند. يكي از انواع فريت هاي هگزاگونال، فريت باريم (BaFe12O19) مي باشد.
ABSTRACT
Barium ferrite with BaFe12-x compound (MnO / 5Co0 / 5Ti) / x2O19 was prepared by solid state method. Ferrites have hexagonal and non-impure beads. The ferrites prepared with polyvinyl chloride polyvinylchloride were mixed in a weight ratio of 80 to 20, until a compound of Ferrite-Polymer was prepared. VSM, SEM, XRD and adsorption experiments were performed by vector network analyzer device on the samples. The results of the experiments show that the M-type structure was formed without the presence of a secondary phase in the ferrites. Also, samples containing a higher level of surface under the hysteresis curve, the residual field and magnetic permeability with more magnetic losses. Research has shown that BaFe12-x (Mn0 / 5Co0 / 5Ti) x / 2 O19 friction with x = 2 can act as a broadband absorber at frequencies above 15 GHz. The absorption rate at some frequencies is greater than – 25dB. This indicates that by controlling the chemical composition of the ferrite, and with the increasing of the alloying elements, the frequency of the resonance of barite ferrite from 48GHz to the Ku band band frequencies decreases.
INTRODUCTION
With the advent of radar technology and microwave communications, the need to build materials to keep track of radar equipment has increased. A wide range of studies have been carried out on the manufacture of radar absorber components in various frequency bands. For the proper absorption of electromagnetic waves in radar absorber materials, the intrinsic impedance of absorbent material must be the same as the intrinsic impedance of air. Spinley ferrites can not act as an electromagnetic wave absorber in microwave radio frequency bands due to the small size of the imaginary magnetic permeability component in microwave frequencies. Unlike spinel and lalid ferrites, hexagonal ferrites of Type M are absorbent for waves. One of the types of hexagonal ferrites is barite ferrite (BaFe12O19).
Year: 2017
Publisher : 11th National Congress of metallurgy of Iran
By : Ali Ghasemi, Mohammad Hussein Shams
File Information: persian Language/ 9 Page / size: 1,24 KB
سال : 1396
ناشر : يازدهمين كنگره ملي مهندسين متالوژی ايران
کاری از : علي قاسمي ، محمدحسين شمس
اطلاعات فایل : زبان فارسی / 9 صفحه / حجم : KB 1.24
نقد و بررسیها
هنوز بررسیای ثبت نشده است.