توضیحات
چکیده
خــواص مغناطيــسي نوارهــای آمــورف ( Co64Fe4Ni2B19-xSi8Cr3Alx (x=0, 1, 2, 3بــا درصدهاي مختلف ،Alتهيه شده بوسیله روش انجماد سریع “چرخ مذاب” مـورد مطالعـه قـرار گرفتـه است. اثر افزودن Alبه آلياژ مذکور بر ساختار آمورف و خواص مغناطيسي حاصـله بررسـي شـده اسـت. آزمایشات نشان داده است که افزودن Alباعث کاهش درجه حرارت تبلور ميشـود. همچنـين افـزودن مقدار بهينه ،Alخواص نرم مغناطيسي را بهبود می بخشد. در اين تحقيق، بهينه سازي ميزان Alدر توليد نوارهاي آمورف نرم مغناطيسی پايه Coبه ضخامت تقريبي 23µmو عرض 1/2 mmبا آهنربایش اشباع حداکثر (mTs523/7) و وادارندگي بسیار کم (0/8174A/m) مورد بررسي قرار گرفته شده است.
مقدمه
تحقیق در زمینه مواد نرم مغناطیسی در راستای افزایش نفوذ پذیری مغناطیسی، آهنربایش اشباع و کاهش وادارندگی طراحی میگـردد. سـاختارهای آمـورف بـدلیل حـذف شـبکه بلـوری در آن و در نتیجه حذف ناهمسانگردی مغناطیسی بلوری عمدتاً دارای نفوذپذیری بالایی میباشند اما هنوز نیاز صنعتی برای افزایش آن وجود دارد.و این در صورتی است که اگرچه افزایش نفوذپذیری در آلیاژهای آمورف تضمین می شود اما عمـدتاً سیـستم بـا کـاهش آهنربـایش روبـرو مـی گـردد. در راستای چشم انداز ترسیمی عناصر افزودنی میتواننـد کمـک شـایانی باشـند تـا شـرایط بهینـه ای از خواص مغناطیسی و قابلیت تولید حاصل نمایند. اگرچه حدسهایی در این زمینه موجـود اسـت امـا سوال از ساز و کارهای دخیـل در تـاثیر عناصـر افزودنی بر خواص نهایی همچنان باقی است. در بین مواد نرم مغناطیس بالاترین نفوذپذیری در آلیاژهای آمورف پایه Coدیده شـده اسـت. در پـژوهش حاضـر سـنتز نوارهـاي نـرم مغنـاطيس آمورف ( Co64Fe4Ni2B19-xSi8Cr3Alx (x=0, 1, 2, 3به روش چرخ مذاب مـورد مطالعـه قـرار گرفته و بهينه سازي ميزان Alدر آلياژهای مورد بحث با بهترين خواص مغناطيسي تعيين شده است. شمـشهاي آلياژهـاي ( Co64Fe4Ni2B19-xSi8Cr3Alx (x=0, 1, 2, 3از عناصـر اوليـه بـا درصـد خلوص بالاتر از % 99/9دراتمسفر آرگون و در کوره القايي تحت خـلاء تهيـه شـد. نوارهـاي آمـورف هريک از آلياژها از طريق روش چرخ مذاب با سرعت چرخ مسي 35m/sتهيه گرديـد. اتمـسفر محـيط براي تهيه نوارها، چندين بار توسط گاز آرگون وخلا شستشو داده شد و نهايتاً تحت گاز Arبافشار bar ،1نوارها تهيه شدند. ديگر پارامترهاي روش چرخ مذاب چون قطر نازل، فاصله تا چرخ مسي، زاويه و… ثابت در نظر گرفته شدند. نوارهـاي حاصـل از روش چـرخ مـذاب ضـخامتي در حـدود 23µmوعـرض 1/2mmدارند. به منظور بررسي هاي ريزساختاري ، الگـوي پـراش پرتـو Xهـر يـک از نوارهـا بـا آليـاژ مختلف تهيه شد. بـدين منظـور از دسـتگاه XRD-PHILIPSاسـتفاده گرديـد.
ABSTRACT
The magnetic properties of amorphous bands (Co64Fe4Ni2B19-xSi8Cr3Alx (x = 0, 1, 2, 3 with different percentages, Al) prepared by the rapid freezing of the “molten wheel” have been studied. The effect of adding Al to the alloy on the structure of amorphous and magnetic properties. The experiments have shown that Al adds to the crystallization temperature, and also the addition of optimal amount of Al improves the soft magnetic properties. In this study, optimizing the amount of Al in the production of coaxial soft magnetic amorphous strips with a thickness of about 23 μm and a width of 1 / 2 mm with maximum magnetically saturated (7.523 mTs) and very low induction (0.8174 A / m) Is taken.
INTRODUCTION
Research into soft magnetic materials is designed to increase magnetic permeability, magnetism and saturation. Amorphous structures are mainly highly permeable due to the removal of crystalline crystalline crystalline anisotropy, but there is still an industrial need to increase it. However, although the increase of permeability in the amorphous alloys is guaranteed, but mainly the system is reduced with The magnet is facing. In line with the graphical perspective, additive elements can be of great help to obtain optimal conditions of magnetic properties and production capability. Although some guesses are available in this regard, the question of the mechanisms involved in the effect of the additive elements on the final properties remains. Among the soft-magnetic materials, the highest permeability is found in the base of Co-amorphous alloys. In the present study, the synthesis of amorphous soft-magnetic films (Co64Fe4Ni2B19-xSi8Cr3Alx (x = 0, 1, 2, 3) by molten wheel method has been studied and optimization of Al in alloys with the best magnetic properties has been determined. Alloy ingots (Co64Fe4Ni2B19- xSi8Cr3Alx (x = 0, 1, 2, 3) were obtained from primary elements with a purity greater than 9.9% in argon and in an induction furnace under vacuum. The amorphous strips of each of the alloys were prepared using a molten wheel with a velocity of 35 m / s copper speed The atmosphere of the environment was washed with argon gas for several times and strips were prepared. The melting points of the molten wheel, such as the nozzle diameter, the distance to the copper wheel, the angle, etc., were taken into account. The strips produced by the melting wheel were of a thickness of about 23 μm and 1.2 mm in diameter. In order to investigate the microstructure, the X-ray diffraction patterns of each All kinds of strips were prepared and XRD-PHILIPS was used for this purpose.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Hossein Sepehri Amin, Reza Gholamipour, Farzad Shahri, Vahid Reza Abassian, Ali Mohammadi
File Information: persian Language/ 8 Page / size: 1.59 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : حسین سپهری امین ،رضا غلامی پور ،فرزاد شهری ،وحیدرضا عباسیان ،علی محمدی
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 1.59
نقد و بررسیها
هنوز بررسیای ثبت نشده است.