توضیحات
چکیده
امروزه صرفه جويي و استفاده بهينه از انرژي و مواد در مهندسي عمران و صنعت ساختمان از اهميت ويژهاي برخوردار است. هدف از بهينه سازي، بكارگيري حداقل مصالح و نيروي انساني و زمان اجرا در هنگام ساخت ميباشد. با توجه به اينكه نوع تصالات پاي ستونها در قابهاي فولادي ميتواند از عوامل مهم و تاثيرگذار بر اقتصادي بودن طرح باشد، در اين تحقيق، طراحي بهينه قابهاي فولادي با لحاظ نمودن هزينه سازه (تير، ستون و مهاربند) و هزينه اجراي اتصالات كف ستونها به طور همزمان مورد توجه قرار ميگيرد. به اين منظور مدل بهينه سازي طراحي سازه فولادي به همراه اتصالات پاي ستونها در دو حالت اتصال مفصلي و گيردار، ايجاد ميشود. متغيرهاي طراحي، سطح مقطع اعضا و ابعاد صفحه ستونها در نظر گرفته ميشوند. تابع هدف هزينه سازه با اتصالات صفحه ستونها ميباشد كه بايد حداقل گردد. قيود طراحي كه شامل محدوديت هاي طراحي اعضاي سازه و صفحه ستونها ميباشد، بر اساس آييننامه AISCو با روش تنش مجاز ASDتعريف ميشوند. پس از بدست آمدن مدل بهينه سازي، از الگوريتم برنامهريزي درجه دو متوالي (SQP) براي يافتن طرح بهين استفاده ميگردد. نتايج حاصله نشان ميدهد كه روش پيشنهادي تحقيق، توانايي بهينه سازي طراحي قاب فولادي و طراحي اتصالات صفحه ستون را بطور همزمان دارد.
مقدمه
با توجه به اينكه وظيفه يك سازه تحمل بارهاي وارده بر آن و انتقال نيروها به تكيه گاه هاي مناسب است، طبيعتاً بايستي در هر مرحله از انتقال نيروها، تنش ها به حد قابل قبولي كاهش يابند تا در مرحله نهايي بارها بتوانند به سطح زمين و خاك منتقل شوند. اصولاً پي هاي يك سازه وظيفه ي توزيع و انتقال بارهاي وارده از طرف سازه به زمين يا خاك را بر عهده دارند و با كاهش تنشهاي اعمالي بر روي خاك تا حد قابل قبول، نيروهاي يك سازه را به صورت رضايت بخش به زمين منتقل ميكنند.صفحات زيرستون در سازه هاي فولادي ضمن انتقال بارهاي سازه به پي ساختمان، نيروهاي وارد بر آن را در حد قابل قبول تنش مجاز پي كاهش ميدهند به عبارت ديگر وظيفه اصلي صفحات زيرستون كاهش تنشهاي موجود در روي سطح پي و رساندن آنها به حد قابل تحمل و مجاز مصالحي است كه پي از آنها ساخته شده است.در طراحي كف ستونها بايد به دو نكته دقت نمود،نكته اول اينكه نيروي فشاري منتقله از طريق بال هاي فشاري ستون بايد از طريق كف ستون چنان توزيع گردد كه در زير كف ستون مقدار تنش از مقدار تنش مجاز مصالح تجاوز نكند، نكته دوم مربوط به اتصال كف ستون به پي بتني ميشود.
ABSTRACT
Today, saving and optimal use of energy and materials in civil engineering and construction are of great importance. The purpose of optimization is to use minimum material and human resources and runtime during construction. Considering the fact that the type of stairs in the steel frames can be important factors affecting the economics of the design, in this research, the optimal design of steel frames, taking into account the cost of the structure (beam, pillar and braid), and the cost of the implementation of column joints At the same time, attention is paid. For this purpose, the optimization model for steel structure design with foot couplings in two joint and joint joints is created. Design variables, cross-sectional dimensions, and column dimensions are considered. The purpose of the cost function is to construct the structure of the columns page, which should be minimized. The design constraints, which include design constraints for structural members and column columns, are defined according to the AISC rules and the ASD permissible stress method. After obtaining the optimization model, a second-order grade algorithm (SQP) is used to find the optimal design. The results show that the proposed method of research has the ability to optimize the steel frame design and design of the column panel connections simultaneously.
INTRODUCTION
Given that the task of a structure is to withstand the loads on it and the transfer of forces to suitable supports, naturally, at each stage of the transfer of forces, tensions must be reduced to an acceptable level so that in the final stage they can be loaded to the surface of the earth and the soil To be transferred. Principles of a structure are responsible for the distribution and transfer of loads from the structure to the ground or soil, and by reducing the stresses applied on the soil to an acceptable level, the forces of a structure are passed to the satisfactory ground. The substructure in steel structures, while transferring structural loads to the structure, reduces the forces applied to it to the acceptable level of permissible stress. In other words, the main task of the sub floor pages is to reduce tensions on the surface and to bring them to a tolerable and acceptable level. The material is made of them. In the design of the floor columns should be carefully considered, the first point is that the force The compression pressed through the column pillars shall be distributed so that the stress level does not exceed the permitted stresses of the aggregate under the column floor. The second point concerns the connection of the column to the concrete pivot.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Alireza Habibi, Yaser Namdar
File Information: persian Language/ 7 Page / size: 206 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : عليرضا حبيبي ،ياسر نامدار
اطلاعات فایل : زبان فارسی / 7 صفحه / حجم : KB 206
نقد و بررسیها
هنوز بررسیای ثبت نشده است.