توضیحات
چکیده
میراگرهاي الحاقی به منظور کاستن از پاسخ دینامیکی سازه ها در برابر بارگذاري باد و زلزله استفاده می شوند. مکانیزم عملکردي این وسایل به گونه اي می باشد که مقدار زیادي از انرژي ورودي به سازه بر اثر بارگذاري دینامیکی، جذب و مستهلک می شود. عملکرد این وسایل موجب می گردد که انرژي دریافتی سایر اعضاي سازه اي کاهش یافته و در نتیجه تغییر شکل زیادي در آنها ایجاد نشود. میراگر اصطکاکی براساس مکانیزم اصطکاك بین اجسام صلب نسبت به یکدیگر عمل می کند. میراگر اصطکاکی دورانی، نوع خاصی از میراگر اصطکاکی می باشد که داراي مزایاي متعددي از جمله تکنولوژي بسیار ساده، ساخت، نصب و نگهداري آسان و قابلیت چندین بار استفاده است. در این تحقیق کارایی میراگرهاي اصطکاکی دورانی در قاب هاي فولادي مورد بررسی قرار می گیرد. بدین منظور سه قاب 7 ،3و 12طبقه بررسی می شود. براي انجام تحلیل ها یک مرتبه از تحلیل دینامیکی تاریخچه زمانی غیرخطی در نرم افزار PERFORM-3Dاستفاده می شود. در تحلیل هاي دینامیکی از هفت شتاب نگاشت اصلاح و مقیاس شده استفاده شده و بین پاسخ هاي این هفت شتاب نگاشت عمل میانگین گیري انجام می شود. بار دیگر از تحلیل استاتیکی غیرخطی براي بدست آوردن منحنی ظرفیت سازه استفاده می شود. بعد از انجام تحلیل هاي دینامیکی مشاهده شد که میراگرهاي اصطکاکی دورانی در قاب هاي خمشی با جذب و استهلاك درصد بالایی از انرژي ورودي به سازه، شرایط ایمن و پایداري را نسبت به ساختمان هاي مشابه فراهم می کنند. بعد از انجام تحلیل هاي استاتیکی غیرخطی بر روي سازه هاي مورد بررسی مشخص می شود که این میراگرها تا قبل از رسیدن به بار لغزش خود، موجب افزایش سختی سازه می شوند، اما بعد از لغزش میزان سختی برابر با سختی قاب بدون میراگر می باشد و بنابراین در سازه هایی که افزایش سختی براي آنها مفید باشد این میراگر موجب بهبود رفتار لرزه اي آنها خواهد شد.
مقدمه
یکی از روشهاي کنترل ارتعاشات سازهها تحت تأثیر بارهاي لرزهاي، استفاده از وسایل اتلاف انرژي یا میراگرها است. کاربرد این وسایل در طراحی ساختمانهاي جدید و مقاومسازي ساختمانهاي موجود به سادگی امکان پذیر است. میراگرها بجاي افزایش شکل پذیري عناصر سازه اي تکیه بر مستهلک نمودن انرژي لرزه اي دارند. افزودن وسایل جاذب انرژي به سازه یا جداسازي لرزه اي سازه معمولاً از راههاي کنترل سازه شناخته می شود. در دو دهه اخیر پیشرفت هاي قابل ملاحظه اي در کنترل سازه صورت گرفته است. بر اساس طبیعت استهلاك انرژي زلزله، این سیستم هاي کنترل به سه دسته تقسیم بندي می شوند که عبارتند از : کنترل فعال، کنترل نیمه فعال و کنترل غیر فعال.
ABSTRACT
Exhaust dampers are used to reduce the dynamic response of structures to wind and earthquake loading. The functional mechanism of these devices is such that a large amount of input energy into the structure is absorbed and depreciated by dynamic loading. The performance of these devices reduces the energy received by other structural members and, as a result, does not cause much deformation. Friction damper acts on the basis of the friction mechanism between rigid bodies relative to each other. Rotary friction damper is a special type of friction damper that has many advantages, including very simple technology, easy to install, maintain, and recycle multiple times. In this research, the efficiency of rotary frictional dampers in steel frames is investigated. For this purpose, three frames of 7, 3 and 12 floors are examined. For analysis, a nonlinear time history dynamic analysis is used in PERFORM-3D software. In the dynamic analysis, seven corrected and scalable acceleration maps are used and among the responses of these seven acceleration maps the averaging action is performed. A nonlinear static analysis is again used to obtain the structural capacity curve. After dynamic analysis, it was observed that rotary frictional dampers in flexure frames with absorption and deposition of high percentage of energy input to the structure provide safe and stable conditions for similar structures. After performing nonlinear static analyzes on the structures, it is shown that these dampers increase the stiffness of the structure before reaching their slip load, but after the slip, the hardness is equal to the stiffness of the frame without a damper and Therefore, in structures where hardening is beneficial to them, this damper will improve their seismic behavior.
INTRODUCTION
One of the methods for controlling vibrations of structures under the influence of seismic loads is the use of energy dissipation or dampers. The use of these devices in the design of new buildings and the retrofitting of existing buildings is simply possible. Instead of increasing the structural droplets, the dampers rely on seismic energy loss. Adding absorbent energy to structure or seismic separation of the structure is usually known as structural control. Over the past two decades, significant progress has been made in controlling the structure. Based on the nature of earthquake energy depreciation, these control systems are divided into three categories: active control, semi-active control and inactive control.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Sarah Mirzabagheri, Ali Akbar Agakuchek
File Information: persian Language/ 8 Page / size: 2,44 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : سارا میرزاباقري ، علی اکبر آقاکوچک
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 2,44
نقد و بررسیها
هنوز بررسیای ثبت نشده است.