توضیحات
چکیده
آبشستگی موضعی درصورتی که مهار نشود، باعث فرسایش شدید شده و پایداری سازه ها را به مخاطره میاندازد. ازجمله سازه هایی که با این مشکل مواجه اند دریچه ها و سرریزها یا ترکیب این دو سازه میباشند. حال اگر در سرریز یا دریچه انقباض ایجاد شود تغییر قابل توجهی بر شکل حفره آبشستگی ایجاد میشود. در این مقاله به بررسی آزمایشگاهی مشخصات حفره آبشستگی در پاییندست سرریز و دریچه ترکیبی با انقباض مقطع پرداخته شده است. نتایج نشان داده است که با افزایش انقباض جت جریان متمرکزتر شده و درنتیجه حداکثر آبشستگی بیشتر خواهد شد. حرکت روبه جلو رسوبات با آهنگ ملایمتر و درنتیجه طول رسوب گذاری کمتر خواهد شد.
مقدمه
آبشستگی موضعی در صورتی که مهار نشود، میتواند باعث فرسایش شدید شده و پایداری سازه ها را به مخاطره بیاندازد، همچنین تجمع مواد فرسایش یافته باعث تغییر رقوم پایاب شده و میتواند بر عملکرد خروجی سازه تأثیر بگذارد (دهقانی و همکاران، 1389) برآورد دبی جریان در شبکه های انتقال آب و فاضلاب از اهمیت ویژه ای برخوردار بوده، وسایل مختلفی ازجمله انواع سرریز، دریچه و پارشال فلوم برای اندازه گیری مورد استفاده قرارمی گیرد ,(2002, Negm, Ackers et all, 1978, Bos, 1976, BSI, 1965, USBR ). در مواردی که آب انتقالی برای آبیاری همراه با مواد رسوبی یا شناور باشد موجب بروز مشکلاتی در نحوه عملکرد سیستم های فوق می شوند. استفاده از سیستم ترکیبی سرریز و دریچه به مقدار زیادی مشکل فوق راکاهش و امکان اندازه گیری را ساده تر و دقیقتر می نماید (اسماعیلی و همکاران،1385 ). این وسیله ترکیبی وضعیت هیدرولیکی جدیدی را پدید میآورد که با شرایط سرریز تنها و دریچه تنها متفاوت است. مشکلات ناشی از فرسایش و رسوبگذاری میتواند توسط ترکیب دریچه و سرریز مرتفع نمود (دهقانی و همکاران، 2010). بنابراین به طورکلی میتوان گفت در جریان ترکیبی مشکل رسوب گذاری پشت سرریز توسط دریچه و تجمع مواد زائد پشت دریچه نیز توسط سرریز ترفیع خواهد شد. همچنین با این روش رسوبات و مواد زائد در پشت سرریزها انباشته نمیشوند.( 1985,Majcherek).
ABSTRACT
Local scouring, if not inhibited, causes severe erosion and endangers structures. Among the structures that are faced with this problem are the valves and overflows or the combination of these two structures. Now if there is a contraction in the overflow or valve, there is a significant change in the shape of the scour hole. In this paper, a study of the characteristics of the scour hole in the downstream of the overflow and the combined valve with shrinkage of the cross section has been investigated. The results show that with increasing jet shrinkage the flow is more concentrated and thus the maximum scouring will be increased. Moving ahead of the sediment with a slower song, and hence the length of the sedimentation will be less.
INTRODUCTION
Local scouring, if not inhibited, can cause severe erosion and endangers structures, as well as the accumulation of erosional materials will change the remaining digits and can affect the output performance of the structure (Dehghani et al., 2010). Estimation of flow rate In water and wastewater networks, it is important to use various instruments, such as types of overflows, valves and flanges for measurement, (Negm 2002, Ackers et all, 1978, Bos, 1976, BSI, 1965). , USBR). In cases where transfer water for irrigation with sediment or floating material causes problems in the operation of the above systems. The use of the overflow and valve combination system greatly reduces the problem and makes it easier and more accurate to measure (Ismaili et al., 2006). This combination combines a new hydraulic condition that is only different from single-spill overflow conditions. The problems caused by erosion and sedimentation can be eliminated by combining the valve and overflow (Dehghani et al., 2010). Therefore, it can be said in the combined process that the problem of sedimentation behind the overflow through the valve and the accumulation of waste products behind the valve will also be promoted by overflow. Also, sediment and waste materials do not accumulate in the back of the overflows (1985, Majcherek).
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Mahboobeh Shahabi, Naser Taleb Bidokhti, Amir Ahmad Dehghani, Abdolrasoul Talouri, Gholamreza Rakhshandeh
File Information: persian Language/ 8 Page / size: 446 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمين كنـگره ملي مهندسی عمـران
کاری از : محبوبه شهابی ،ناصر طالب بیدختی ،امیراحمد دهقانی ، عبدالرسول تلوری ،غلامرضا رخشنده رو
اطلاعات فایل : زبان فارسی /8 صفحه / حجم : KB 446
نقد و بررسیها
هنوز بررسیای ثبت نشده است.