توضیحات
چکیده
در سال هاي اخير نانوفلزات و آلياژها به دليل خواص مكانيكي ، فيزيكي و شيميايي غيرمعمول مورد توجه بسياري از محققان واقع شده اند. رسوب الكتريكي پالسي براي توليد نانوكريستال هاي مس از الكتروليت سولفات مس به همراه تيواوره بعنوان افزودني بكار مي رود و مس ميكروكريستالي نيز با استفاده از رسوب الكتريكي جريان مستقيم قابل توليد است. در اين مقاله رسوب نانوكريستالي به روش پالسی تولید شده است و تاثير پارامترهاي رسوب دهي از قبيل يك دانسيته جريان ، فركانس ، زمان روشن و زمان خاموش جريان پالس بر اندازه دانه ها به منظور بهينه سازي روش و نيز مقاومت به خوردگي پوشش رسوب كرده مورد بررسي قرار گرفته است. نتايج نشان داده است كه سطح نانوكريستالي از نظر شيميايي پايدارتر از سطح پوشش داده شده از طريق جريان مستقيم است. افزايش پایداری مربوط به تشكيل لایه مستحكم تر و به مراتب چسبنده تر بر روي مس نانوكريستالی میباشد كه با آزمايش پلاريزاسیون نيز قابل تاييد است. همچنين از اين مقاله نتيجه مي شود كه مس نانوكريستالي داراي مقاومت به خوردگي بهتري در مقايسه با ساختار ميكروكريستالي است.
مقدمه
نانومواد در مقايسه با مواد چند كريستالي و آمورف رايج ، خواص مكانیكي فيزيکی، شیمیایی الكتروشیمیايي تغییرمتعارفي از خود نشان مي دهندكه موجب شده است توجه زیادي را به خود معطوف سازند. روش هاي مختلف برای تولید نانوذرات وجود دارند كه شامل تغيير شكل پلاستیكي شدید رسوب شیمیايي بخار ، آلياژسازي مكانیكي ، فشرده سازي گاز خنثي رسوب الكتریكي و … میباشند. در مقايسه با ساير روش ها ، روش رسوب الكتروشیمیايي يك روش مقرون به صرفه و قابل كنترل در مقايسه با ساير روش ها پیچيده و گران قيمت میباشد. رسوب الكتریكي پالسي كه در آن جريان بصورت متناوب و در اين مقاله به شكل موج مربعي اعمال مي شود يك ابزار نيرومند براي كنترل مرحله الكتروكرييستاليزاسیون و توليد رسوباتي با خواص و ساختارمنحصربفرداست.
ABSTRACT
In recent years, nanofluid and alloys have been considered by many researchers due to unusual mechanical, physical, and chemical properties. The pulsed electric pulp is used to produce copper nanocrystals from copper sulfate electrolytes with tiovar as an additive, and microcrystalline copper can also be produced using direct electric charge deposition. In this paper, nanocrystalline deposition is generated by pulse method. The effect of sedimentation parameters such as flow density, frequency, brightness and pulse current offset time on grain size in order to optimize the method and also the corrosion resistance of sedimentary coating has been investigated. Is located. The results have shown that the nanocrystalline surface is more stable than the surface coated by direct flow. Increasing stability is due to the formation of a more solid and much more adhesive layer on nanocrystalline copper, which can also be confirmed by polarization testing. It is also concluded from this paper that nanocrystalline copper has a better corrosion resistance compared to microcrystalline structure.
INTRODUCTION
Nanomaterials, in comparison with commonly used multi-crystalline and amorphous materials, exhibit a mechanical change in physical, electrochemical, and chemical properties, which has attracted a lot of attention. There are various methods for the production of nanoparticles, including the extreme plastic deformation of chemical vapor deposition, mechanical alloying, compression of neutral gas, and electrodeposition. Compared to other methods, an economical and economical method of electrochemical deposition is complex and expensive in comparison with other methods. The pulsed electric charge deposition, in which the flow is applied alternately in this paper in the form of a square wave, is a powerful tool for controlling the electro-crystallization stage and the production of sediments with properties and structural properties.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Mohsen Saremi, Maryam Aboei
File Information: persian Language/ 10 Page / size: 901 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : محسن صارمي ، مريم ابوئي
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 901
نقد و بررسیها
هنوز بررسیای ثبت نشده است.