توضیحات
چکیده
در ادامه تحقيقات در زمينه نانووايرها, در اين مقاله خواص مختلف نانووايرهاي فلزي كبالت و آلياژهاي كبالت-نيكل مورد بررسي قرار گرفت. نانووايرها در داخل حفرات تمپليت هاي منظم اكسيد آلومينيم رسوب داده شدند. تمپليت هاي منظم اكسيد آلومينيم با روش آندايزينگ دو مرحله اي ساخته شدند و قطر و طول حفرات به ترتيب در محدوده ابعادي 30-35 nmو 3000-5000 nmتنظيم گرديدند. خواص مختلف نانووايرها از نظر تركيب شيميايي، مورفولوژي و خواص مغناطيسي با استفاده از تكنيك- هاي مختلف TEM ,AFM ,SEM ,EDXو VSMارزيابي گرديد. طي اين تحقيق مشاهده شد كه بين غلظت يونها در محلول با تركيب آلياژي نانووايرهاي به دست آمده رابطه مستقيمي وجود دارد. نيز مشاهده شد كه در محدوده پتانسيل بهينه به دست آمده, تغييرات پتانسيل تاثير چنداني در تركيب شيميايي نانووايرهاي به دست آمده ندارد. در بين نانووايرهاي بررسي شده, نانووايرهاي با تركيب %55كبالت- %45نيكل داراي بالاترين خواص مغناطيسي هستند و كمترين خواص مغناطيسي در اين بين مربوط به آلياژ %70 كبالت- %30نيكل ميباشد.
مقدمه
يكي از مواد نانوساختاري بسيار موثر در علوم امروزي نانووايرها هستند كه به دليل نوع ساختار هندسـي و خواص بسيار جالبي كه دارند بازه بسيار گستردهاي ميتوان براي كاربرد آنهـا متـصور شـد. از جملـه ايـن كاربردها ميتوان به اتصالات بين قطعات الكترونيكي نانومتري, قطعات مغناطيسي, سنسورهاي شيميايي و بيولوژيكي و برچسب هاي بيولوژيكي اشاره نمود. دسته بزرگي از نانووايرها, نانووايرهاي فلزي مغناطيسي هستند كه از لحاظ علمي بسيار مورد توجه هـستند و در زمينـه هـاي مختلفـي از علـم نـانوتكنولوژي ماننـد كاربرد در محيط هاي ضبط مغناطيسي, در زمينه هاي اپتيك و ميكروموجها و بيولوژي داراي اهميت ويژه هستند. امروزه بيشترين ميزان نانووايرها به دليل كنترل بهتر قطر و طول حفـرات و كيفيـت سـطح آنهـا بـا كمـك تمپليت ساخته ميشوند و در بين تمپليت , ها ممبران هـاي پلـيكربنـات (PCT) و ممبـران هـاي اكـسيد آندي آلـومينيم (AAO) بيـشترين ميـزان كـاربرد را دارنـد. ممبـران هـاي اكـسيد آنـدي آلـومينيم (AAO)به دليل پايداري در دماي بالا و در مقابل حلالهاي آلي, يكنواختي و موازي هم بودن حفـرات, چگالي حفرات بالا و نظم مناسبتر و پايداري مكانيكي مناسب داراي اهميت بـالاتري هـستند پيش از اين در تهيه نانوساختارهاي مختلف به روش الكتروشيميايي مـورد اسـتفاده قـرار گرفتـه انـد.
ABSTRACT
In this study, various properties of cobalt metal nanowires and cobalt-nickel alloys were investigated. Nanoparticles were deposited inside the cavities of regular aluminum oxide templates. Regular aluminum oxide templates were constructed by two stage anodizing method, and the diameter and length of the cavities were set in the dimensions range of 30-35 nm and 3000-5000 nm, respectively. Different properties of nanowires were evaluated for chemical composition, morphology and magnetic properties using different techniques such as TEM, AFM, SEM, EDX and VSM. During this study, there was a direct correlation between the concentration of ions in the solution with the alloy composition of the nanowires. It was also observed that in the optimum potential range, potential changes do not have much effect on the chemical composition of the obtained nanowires. Among the studied nanowires, nano-wires with 55% cobalt-45% nickel have the highest magnetic properties, and the least magnetic properties are related to 70% cobalt-30% nickel alloy.
INTRODUCTION
One of the most effective nano-structure materials in modern science is nanowire, which is due to the geometric structure and very interesting properties that can be widely used for their application. Among these applications, we can mention connections between nanoscale electronic components, magnetic components, chemical and biological sensors, and biological labels. A large category of nanowires is a scientifically important magnetic nanowire, which is very important in various fields of nanotechnology such as applications in magnetic recording environments in the fields of optics and micromosomes and biology. Today, most nano-waves are made with the help of template due to better control of the diameter and length of the cavities and their surface quality. Between the templates, the polycarbonate membranes (PCT) and the anodic aluminum oxide membranes (AAO) have the highest application rates. Anode-aluminum oxide membranes (AAO) are more important in the preparation of different nanostructures due to their high stability at the high temperature and organic solvents, the uniformity and parallel alignment of the cavities, high pore density, and better order and mechanical stability. Electrochemicals have been used.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Nastaran Riahi Nouri – Rasoul Sarraf Mamouri – Ali Mahdikhani
File Information: persian Language/ 8 Page / size: 1.32 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : نسترن رياحي نوري – رسول صراف ماموري – علي مهديخاني
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 1.32
نقد و بررسیها
هنوز بررسیای ثبت نشده است.