توضیحات
چکیده
امروزه كامپوزيتهاي زمينه فلزي كاربردهاي بسيار بيشتري نسبت به گذشته دارند و از نظر اقتصادي مقرون به صرفه تر شده اند. دليل اين امر نيز استفاده از روشهاي ساخت ارزان قيمت تر نسبت به گذشته در توليد اين نوع مواد است . در تحقيق مورد نظر از آلياژ آلومينيوم A356.1به عنوان فاز زمينه مورد استفاده قرار گرفته است و فازهاي سراميكي زيركن( سيليكات زيركونيوم)،كاربيد بور و دي بورايد تيتانيم به عنوان تقويت كننده به آن اضافه شده اند. ريزساختار اين نمونه ها مورد ارزيابي قرار گرفته اند (مشاهدات SEM). از آناليز XRDنيز براي تعيين تركيب شيميايي استفاده شد. در پايان تاثير انواع مختلف تقويت كننده ها بر خواص كامپوزيت در روش ريخته گري گردابي(ورتكس) مورد ارزيابي قرار گرفت.
مقدمه
ساخت كامپوزيتهاي زمينه فلزي به روش گردابي:
خواص كامپوزيتهاي زمينه آلوميني يمو به عوامل متعددي نظير روش توليد، نوع زمينه و نوع فاز تقويت كننده بستگي دارد. در اين بين روش توليد از اهميت ويژه اي برخوردار است ؛ چرا كه توزيع فاز سراميكي در زمينه و استحكام فصل مشترك سراميك- زمينه را تحت تأثير قرار مي دهد. روشهاي ساخت کامپوزيتهاي زمينه آلوميني يمو را ميتوان به فرايندهاي(1)حالت مايع )مذاب (2) حالت جامد و (3) رسوب دهي، طبقه بندي نمود. كامپوزيتهاي زمينه آلومينيومي تقويت شده به وسيله ذرات را ميتوان به سادگي از طريق روش حالت مايع يعني ريخته گري گردابي تهيه نمود. ريخته گري گردابي مذاب روش بسيار مناسبي است، چرا كه هم ارزان قيمت بوده و هم تنوع گوناگوني از مواد و شرايط توليد را دارا مي باشد. نقش اساسي تقويت كننده در كامپوزيت هاي زمينه فلزي، تحمل قسمت بيشتر بار اعمالي، در محل اتصال زمينه و تقويت كننده مي باشد. ترشوندگي خوب، شرط اساسي براي ايجاد پيوند مناسب بين ذرات و زمينه آلومينيومي در حين ريختهگري كامپوزيت ميباشد تا انتقال و توزيع بار از زمينه به ذرات بدون هيچگونه شكستي صورت گيرد. پيوندهاي محكم در فصل مشترك براي ترشوندگي خوب لازم است. اين پيوندها به وسيله انحلال متقابل يا واكنش ذرات و زمينه فلزي به وجود ميآيند.
ABSTRACT
Metal-based composites today have far more applications than ever and economically more economical. The reason for this is the use of cheaper manufacturing methods in the production of this type of material than in the past. In the study, aluminum alloy A356.1 has been used as a background phase, and ceramic phases of zircon (zirconium silicate), boron carbide and titanium diphosphate have been added to it as reinforcement. The microstructure of these samples has been evaluated (SEM observations). XRD analysis was also used to determine the chemical composition. Finally, the effect of different types of reinforcers on the composite properties in vortex casting (Vortex) method was evaluated.
INTRODUCTION
Construction of metal background composites by vortex method:
The properties of aluminum composite composites depend on a variety of factors, such as the production method, the type of background and the type of reinforcing phase. In this regard, the production method is of particular importance because the ceramic phase distribution affects the field and the strength of the ceramic-background joint area. The methods for making aluminum composite foam membranes can be classified into processes (1) liquid state (2) solid state and (3) sedimentation. The aluminum-reinforced aluminum composite particles can be easily made by using a liquid state method, ie, casting. Mold casting is a very good method, because it is both cheap and has a wide variety of materials and production conditions. The main role of reinforcement in metal composite is to withstand most of the applied load at the base of the reinforcement. The good wettability is a prerequisite for the proper bonding between the particles and the aluminum foil during the casting of the composite, in order to transfer and distribute the load from the ground to the particles without any failure. Firm joints in the common area are necessary for good wettability. These bonds are formed by the mutual dissolution or reaction of particles and the metal background.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Kamyar Shirvani Moghadam-Hosein Abdi Zadeh -Hamidreza Baharvandi-Nasser Ehsani-Amid Fateh Doriani-Farhad Abdi
File Information: persian Language/ 9 Page / size: 7.27 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : كاميار شيرواني مقدم -حسين عبدي زاده -حميدرضا بهاروندي -ناصر احساني -اميد فاتح درياني-فرهاد عبدي
اطلاعات فایل : زبان فارسی / 9 صفحه / حجم : KB 7.27
نقد و بررسیها
هنوز بررسیای ثبت نشده است.