توضیحات
چکیده
يك دسته از آلاينده هاي سخت تجزيه پذير و مقاوم فاضلاب، تركيبات آلي حلقوي هستند كه به دليل سميت بالا و پايداري در برابر تجزيه بيولوژيكي، حذف آنها به روش هاي معمول تصفيه فاضلاب امكان پذير نمي باشد. فنل از جمله اين دسته از مواد مي باشد كه در خروجي پساب بسياري از صنايع همچون صنايع پتروشيمي، پالايشگاهها، صنايع داروسازي يافت مي شود. در اين تحقيق حذف فنل بوسيله فرايند فتوكاتاليستي نانو اكسيد روي و لامپ UVمورد مطالعه قرار گرفت. از بتن به عنوان بستر تثبيت نانو ذرات استفاده شد. تاثير پارامترهاي اجرايي همچون غلظت آلاينده ورودي، pHو شدت تابش منبع نوري مورد مطالعه قرار گرفت. در شرايط بهينه (غلظت اوليه 50ميليگرم بر ليتر فنل، pHبرابر 11و توان منبع تابش برابر 32وات)، راندمان حذف سيستم پس از گذشت 5ساعت بيش از 90درصد بود.
مقدمه
فنل از جمله آلاينده هاي سمي و پايدار مي باشد كه در صورت رها شدن در محيط زيست مي تواند خطرات بسياري براي حيات موجودات زنده و انسان داشته باشد. فنل ميل تركيبي زيادي با كلر دارد كه منجر به تشكيل كلرو فنل ها مي شود. اين دسته از مواد سميت بالاتري نسبت به خود فنل دارند و در برابر تجزيه نيز مقاوم تر هستند ( Ksibiو همكاران 2003). با پيشرفت صنايع و توليد فاضلاب هاي صنايعي كه در خروجي خود داراي مقادير قابل ملاحظه اي فنل مي باشند مانند صنايع پتروشيمي، پالايشگاه ها، صنايع داروسازي، بكارگيري روشي مناسب براي حذف اين آلاينده ضروري به نظر مي رسد) Wangو همكاران . روشهاي متداول تصفيه فاضلاب مانند جذب به وسيله كربن فعال يا اكسيداسيون شيميايي ساده عمدتا از كارايي لازم براي حذف فنل برخوردار نيستند. در اين روشها فنل از فازي به فازي ديگر تبديل مي شود و يا توليد محصولات ثانويه كه خود عمدتا سمي هستند مشكل ساز خواهد شد. علاوه بر اين به دليل سميت بالاي تركيبات حلقوي مانند فنل براي حيات ميكروارگانيسم ها، روشهاي بيولوژيكي كه معمولا به دليل مقرون به صرفه بودن در اكثر تصفيه خانه ها مورد استفاده قرار مي گيرند، نمي توانند موثر واقع گردند لذا ابداع روشي موثر براي حذف اين دسته از آلاينده ها مورد توجه بسياري از محققين قرار گرفته است ( Poulpoulosو همكاران2006).
ABSTRACT
A bunch of highly degradable and sewage resistant pollutants are volcanic organic compounds that due to their high toxicity and stability to biological degradation, it is not possible to remove them from conventional wastewater treatment methods. Phenol is one of these materials that is found at the outlet of many industrial waste such as petrochemical industries, refineries, and pharmaceutical industries. In this study, phenol removal was studied by photocatalytic process of zinc oxide and UV lamp. Concrete was used as a stabilization bed for nanoparticles. The effect of operating parameters such as input concentration, pH and radiation intensity of the light source were studied. Under optimal conditions (initial concentration of 50 mg / l phenol, pH 11 and radiation source power of 32 watts), the system removal efficiency was more than 90% after 5 hours.
INTRODUCTION
Phenol is one of the most toxic and persistent pollutants that, if released in the environment, could have many dangers for the life of human beings. Phenol has a high concentration of chlorine, which leads to the formation of chlorophenols. These compounds have higher toxicity to phenols and are more resistant to degradation (Ksibi et al., 2003). With the advancement of industries and the production of wastewater from industries that have significant phenol in their output, such as petrochemicals, refineries, and pharmaceutical industries, the use of a suitable method for the removal of this pollutant seems necessary (Wang et al. Conventional wastewater treatment methods, such as activated carbon adsorption or simple chemical oxidation, are not primarily effective in eliminating phenol. In these methods, phenol is converted from fuzzy to fuzzy, or the production of secondary products, which are themselves mainly toxic, will be problematic. In addition, due to the high toxicity of ring compounds such as phenol for the life of microorganisms, biological methods that are commonly used as the most cost-effective option in most of the plants can not be effective. Therefore, the invention of an effective way to remove this category The pollutants are of interest to many researchers (Poulpoulos et al., 2006).
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Hesam Zaman Khan, Bita Ayati, Hossein Ganji Dost
File Information: persian Language/ 7 Page / size: 176 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : حسام زمان خان، بيتا آيتي، حسين گنجي دوست
اطلاعات فایل : زبان فارسی / 7 صفحه / حجم : KB 176
نقد و بررسیها
هنوز بررسیای ثبت نشده است.