توضیحات
چکیده
در اين تحقيق رفتار ترمومکانيکي سوپر آلياژ پايه نيکـل ، Hastelloy Xتوسـط آزمـايش فـشار گـرم بـا دستگاه INSTRON 8503که اجزاي اصـلي دسـتگاه را سيـستم هيـدروليک مـدار بـسته، سيـستم کنتـرل کـامپيوتري و تجهيـزات آزمـايش تـشکيل مـيدادنـد، در نـرخ کـرنش بـين 0.1s-1 -0.001و دماهـاي آزمايش بين 950−1150 oCمورد بررسي قرار گرفت. جهت روانکاري در حين تغييرشـکل از روانکـار معمول که در آزمايشهاي فشار گرم مورد استفاده قرار ميگيرند، اسـتفاده شـد تـا حـدالامکان از مقـدار بشکهاي شدن در حين تغييرفرم جلوگيري شود. از آزمايشات انجام شده مشاهده شد که در دماهاي کمتـر از 1000oCدر کليه نمونه ها موضعي شدن سيلان اتفاق افتاد و نوار برشي در راستاي قطري نمونـه تـشکيل شد که در دماهاي پايينتر و سرعتهاي کرنش بيشتر شديدتر است. بر اين اساس محدوده کار گـرم ايـن آلياژ بين 1000-1150oCتعيين گرديد. رفتار ترمومکـانيکي آليـاژ بـا اسـتفاده از معـادلات Power lawو Sellars-Tegartمدلسازي شده و مشاهده شد که معادله Power law پيشبيني خوبي از تنش سيلان فلـز در شرايط مختلف تغييرشکل ارائه ميدهد.
مقدمه
سوپرآلياژهاي پايه نيکل به خاطر مقاومت عالي خود در برابر خزش، خستگي و خوردگي به طور گست رده اي در قطعات دماي بالاي توربين هاي گازي مورد استفاده قرار ميگيرند. متالورژي پودر، ريخته گري و شکل دهي گرم مهمترين روشهاي توليد به کار گرفته شده در ساخت قطعات از جنس سوپرآلياژها ميباشند. Hastelloy Xيک سوپرآلياژ پايه نيکل با مقاومت به خوردگي خوب است که از طريق رسوبدهي فاز ′ γو محلول جامد نيکل با عناصر موليبدن، تنگستن و کرم استحکام دهي ميشود اين آلياژ به طور ويژه براي سرويسهاي طولاني مدت 10000ساعت در دماهاي تا 900درجه سانتيگراد طراحي شده است. عناصر آلياژي اين آلياژ طوري انتخاب شده تا خواص مکانيکي آلياژ افزايش و باعث بهبود خوردگي در دماهاي بالا و همچنين مقاومت خزشي، تافنس شکست و پايداري ساختاري گردد. از آنجا که Hastelloy Xدر مقايسه با ساير سوپرآلياژها نسبتاً جديد است، درصد کمتري از تحقيقات را به خود اختصاص داده است. ليکن در دهه 90با توجه به خواص مکانيکي عالي و توانايي بالقوه آن براي محصولات مختلف از جمله محفظه احتراق موتور جت بيشتر مورد توجه قرار گرفته و تحقيقات چندي بر روي آن انجام گرفته است.
ABSTRACT
In this study, the thermal conductivity of Nickel base superalloy, Hastelloy X, was tested by hot-pressure test with the INSTRON 8503 device, which comprised the main components of the apparatus, the CCTV system, computer control system and test equipment, at a strain rate between 0.1s-1 -0.001 and test temperatures Between 950-1150 oC was studied. For lubrication during the change, the usual lubricant used in hot press tests was used to prevent the amount of blasts during the formation of the mold. From experiments, it was observed that at temperatures below 1000 ° C in all samples localization of the silane occurred and the shear strip was formed along the diameter of the specimen, which was more intense at lower temperatures and strain rates. Accordingly, the heating range of this alloy was determined to be between 1000-150 ° C. The thermomechanical behavior of the alloy was modeled using the Power law and Sellars-Tegart equations and it was observed that the Power law equation provides a good prediction of the metal smelter stress in different change conditions.
INTRODUCTION
Nickel base superalloys are widely used in high temperature gas turbines for their excellent resistance to creep, fatigue and corrosion. Powder metallurgy, casting and hot forming are the most important methods used in the manufacture of parts from superalloys. Hastelloy X is a good nickel base with a high corrosion resistance that is strengthened by ‘γ’ and ‘nickel’ solid solutions with molybdenum, tungsten and worm elements. It is specially designed for long service life of 10,000 hours at temperatures up to 900 ° C. The alloying elements of this alloy are selected to enhance the mechanical properties of the alloy and improve corrosion at high temperatures as well as creep resistance, fracture toughness and structural stability. Since Hastelloy X is relatively new in comparison with other superalloys, it has a lower percentage of research. However, in the 1990s, due to its excellent mechanical properties and its potential for various products, including the jet engine combustion chamber, more attention has been paid and several studies have been done on it.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Naser Golazati, Mehrdad Aghaei Khafari
File Information: persian Language/ 11 Page / size: 210 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : ناصر گلارضي ،مهرداد آقايي خفري
اطلاعات فایل : زبان فارسی / 11صفحه / حجم : KB 210
نقد و بررسیها
هنوز بررسیای ثبت نشده است.