توضیحات
چکیده
در اين مقاله تهيه ذرات نانو سايز مولايت، توسط فرآيند سل-ژل مورد بررسي قرار گرفته است. نيترات آلومينيم و تترا اتيل اورتو سيليكات (TEOS) به عنوان پيش مواد تهيه پودر تك فاز مولايت استفاده شدند. نتايج آزمايشات XRDبر روي محصول نشان داد كه تشكيل مولايت در نمونه فعال نشده در 1094oCروي ميدهد. همچنين عمليات آسياي مياني بر روي ژل خشك شده توسط يك آسياي ماهواره اي پر انرژي به مدت 20ساعت انجام ش . د با توجه به بررسي انجام شده توسط آزمايشات DTA/TGAمعلوم گرديد كه در اثر فعال سازي مكانيكي، دماي تشكيل مولايت كاهش مييابد به اين معني كه يك پيك گرمازا در حدود 988oCاتفاق افتاد كه نشان دهنده تشكيل مولايت از يك پيش سازه آمورف است. مطالعه ساختار محصولات توسط ميكروسكوپ الكتروني روبشي (SEM) نيز نشان ميدهد كه مورفولوژي ذرات، توسط فرآيند پر انرژي سازي مياني تحت تأثير قرار ميگيرد.
مقدمه
مولايت به دليل دارا بودن خواص ويژه و كاربردهاي خاص، در دهه هاي اخير بسيار مورد توجه قرار گرفته است. مولايت با خلوص بالا به دليل مقاوم بودن به خزش در دماي بالا و شوك حرارتي يكي از شاخصترين مواد براي مصرف در دماي بالا است. به همين دليل دسترسي به مولايت خالص يكي از اهداف مهم در علم سراميك است. روش سل-ژل يكي از روشهاي شيميايي تهيه اين ماده است كه به منظور تهيه ژل- هاي تك فازي و دو ازي استفاده ميشود. ژلهاي تك فازي داراي يكنواختي بالا ميباشند كه از آن، مولايت با خلوص بالاتري نسبت به ژل دو فازي تهيه ميشود. ژلهاي تك فازي به دو روش كاملاً مجزا تهيه ميشوند. روش اول بر پايه هيدروليز كنترل شده آلكوكسيدهاي آلومينيم و سيليسيم و روش دوم براساس استفاده از نمكهاي آلومينيم كه معمولاً نيترات آلومينيم و آلكوكسيد سيليسيم است. در روش دوم يكنواختي محصول بيشتر و كنترل فرآيند آسان ميباشد. شكل گيري مولايت نيز در دماهاي پايينتر و در حدود 1000oCرخ ميدهد.
ABSTRACT
In this paper, the preparation of molybdenum nanosized particles is investigated by sol-gel process. Aluminum nitrate and tetraethyl urethro silicate (TEOS) were used as pre-materials for the preparation of single-phase molten powder. The results of the XRD experiments on the product showed that the formation of mullite occurs in the active sample at 1094 ° C. Also, the Middle Asia operation was performed on a gel dried by a high-energy satellite for 20 hours. Depending on the results of the DTA / TGA tests, it was found that mechanical activation reduced the molten formation temperature, meaning that a thermoelectric peak occurred at about 988 ° C, indicating the formation of a mullite from an amorphous precursor. The study of the structure of products by scanning electron microscopy (SEM) also shows that particle morphology is affected by the process of intermediate energy efficiency.
INTRODUCTION
Due to its special properties and applications, the mullite has been very much considered in recent decades. High purity mullite is one of the most important materials for high temperatures due to its high temperature and thermal shock resistance. For this reason, access to pure molybdenum is one of the major goals in ceramic science. The sol-gel method is one of the chemical methods for the preparation of this material, which is used to provide single-phase and two-gel gels. Single phase fission gels have a high uniformity, which makes the mullite more purified than the two-phase gel. Single phase fusion gels are prepared in a completely separate fashion. The first method is based on the controlled hydrolysis of aluminum and silicon aluminum oxides and the second method is based on the use of aluminum salts, which are usually aluminum nitrate and silicon alkoxide. In the second method, the product is more uniform and easy process control. The formation of mullite occurs at temperatures below 1000 ° C.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Morteza Moallenejad, Saeed Heshmati Manesh, Abolghasem Ataei
File Information: persian Language/ 9 Page / size: 1,35 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : مرتضي معلمي نژاد ،سعيد حشمتي منش ،ابوالقاسم عطايي
اطلاعات فایل : زبان فارسی / 9صفحه / حجم : KB 1,35
نقد و بررسیها
هنوز بررسیای ثبت نشده است.