توضیحات
ABSTRACT
Based on the leaching solution of tungsten secondary resource, the metal separation properties of tungstencontaining systems such as the W-Mg-Si-H2O, the W-Al-H2O, the W-Fe-Mo-H2O and the W-Ca- V-H2O, were investigated by theoretical E-pH diagrams and experiments. The results demonstrated that the precipitation rates of Si and W were 99% and 2.4% respectively at pH = 9 in W-Mg-Si-H2O system; the precipitation rates of Al and W were 99.8% and 3.0% respectively at pH = 7 in W-Al-H2O system; the precipitation rates of W and Mo were 95% and 24% respectively at pH = 7 in W-Fe-Mo-H2O system; the precipitation rates of V and W were 91.2% and 4.3% respectively at pH = 13 with Ca:V = 3:1 in V-Ca- W-H2O system. The theoretical predictions were in good agreement with the experimental results. The metal separation for a tungsten-containing polymetallic solution of W, Mo, V, Si and Al, was designed and the parameters were optimized through the orthogonal experiments. The metals of (Si/Al), V, W and Mo were separated step by step with the precipitation rates exceeding 92%. This study provided a reference to metal comprehensive separation and recovery for the tungsten secondary resources.
INTRODUCTION
Tungsten, as a rare metal, with high melting point, high specific gravity and high hardness, is an irreplaceable strategic resource and widely utilized in aerospace, atomic energy, shipbuilding, as well as in the automobile, the electronics and the chemical industries. The use and waste of tungsten is yearly increasing . If the abandoned tungsten is not properly recovered, it will cause pollution to the environment and a waste of resources . At present, the recovery researches of tungsten secondary resource are focused on the recycling methods for several typical wastes. As an example, the recovery process of tungsten slag or alloy scrap is to roast the wastes and the other materials, such as sodium carbonate, sodium sulfate, sodium nitrate, sodium hydroxide, quartz and sodium chloride, all consequently being leached to obtain soluble Na2WO4 with water. The leaching solution is purified following ammonia is added to obtain ammonium paratungstate (APT). Finally, calcination and reduction follow, to obtain pure tungsten . The recovery methods of the carbide waste are divided into two categories; one category is the selective Co extraction, leaving tungsten carbide WC. This is achieved through the acid leaching method, the high temperature treatment method, the zinc melting method or the selective electrochemical dissolution method.
چکیده
بر اساس محلول شستشوی منابع ثانویه تنگستن، خصوصیات جداسازی فلزات از سیستم های حاوی تنگستن مانند W-Mg-Si-H2O، W-Al-H2O، W-Fe-Mo-H2O و W-Ca- V -H2O توسط دیاگرام های نظری E-PH و آزمایشات مورد بررسی قرار گرفتند. نتایج نشان داد که میزان بارش Si و W به ترتیب 99٪ و 2.4٪ در pH = 9 در سیستم W-Mg-Si-H2O بود. میزان رسوب آل و W در pH 7 در سیستم W-Al-H2O به ترتیب 99.8٪ و 3.0٪ بود. میزان بارندگی W و Mo در شرایط pH = 7 در سیستم W-Fe-Mo-H2O به ترتیب 95٪ و 24٪ بود. میزان بارش V و W به ترتیب 91.2٪ و 4.3٪ در pH = 13 با Ca: V = 3: 1 در سیستم V-C-W-H2O بود. پیش بینی های نظری با نتایج تجربی همخوانی خوبی داشتند. جداسازی فلز برای یک محلول پلیمتیک حاوی تنگستن از W، Mo، V، Si و Al، طراحی شده و پارامترها از طریق آزمایش های متعامد بهینه سازی شده است. فلزات (Si / Al)، V، W و Mo از مرحله گام به گام با میزان بارندگی بیش از 92 درصد جدا شدند. این مطالعه مروری بر جداسازی جامع فلزی و بازیابی منابع ثانویه تنگستن ارائه داد.
مقدمه
تنگستن به عنوان یک فلز نادر با نقطه ذوب بالا، گرانروی بالا و سختی بالا، یک منبع استراتژیک غیر قابل جایگزینی است و به طور گسترده ای در زمینه هوا فضا، انرژی اتمی، کشتی سازی، و همچنین در خودرو، الکترونیک و صنایع شیمیایی استفاده می شود. استفاده و هدر دادن تنگستن سالانه افزایش می یابد. اگر تنگرنگ رها شده به درستی بهبود نیافته، باعث آلودگی به محیط زیست و اتلاف منابع خواهد شد. در حال حاضر تحقیقات بازسازی منابع ثانویه تنگستن بر روش های بازیافت برای چندین عنصر معمول تمرکز دارند. به عنوان مثال، فرایند بازیافت از سرباره تنگستن یا قراضه آلیاژی، دفع زباله ها و مواد دیگر مانند کربنات سدیم، سولفات سدیم، نیترات سدیم، هیدروکسید سدیم، کوارتز و کلرید سدیم است که در نتیجه برای استخراج Na2WO4 محلول می شود با آب. محلول شستشو پس از آمونیاک برای به دست آوردن پاراتونگاتما آمونیم (APT) اضافه شده است. در نهایت، کالیبراسیون و کاهش را دنبال کنید، برای به دست آوردن تنگستن خالص. روش های بازیابی پسماندهای کاربید به دو دسته تقسیم می شوند: یکی از این دسته بندی ها استخراج شرکت انتخابی است و کاربید تنگستن را از بین می برد. این روش از طریق روش اشباع اسید، روش درمان با درجه حرارت بالا، روش ذوب روی و یا روش انحلال الکتروشیمیایی انتخابی به دست می آید.
Year: 2019
Publisher : ELSEVIER
By : Liwen Ma, Xiaoli Xi, Zhiqiang Huang, Zuoren Nie
File Information: English Language/ 14 Page / size: 4.27 MB
سال : 1397
ناشر : ELSEVIER
کاری از : لیوان م، Xiaoli Xi، Zhiqiang هوانگ، Zuoren Nie
اطلاعات فایل : زبان انگلیسی / 14 صفحه / حجم : MB 4.27
نقد و بررسیها
هنوز بررسیای ثبت نشده است.