توضیحات
ABSTRACT
In this paper, the four-area multi-units automatic generation control is studied in restructured power system. There are various types of ancillary services present in power system. One of these ancillary services is load following with frequency control which comes broadly under Automatic Generation Control in restructured power system. The prime objective of the paper is to introduce some novel evolutionary computation based techniques applied independently to obtain optimal gain parameters for optimal transient performances under various system operating conditions. Computational results and transient performances are compared to finally determine the best optimization technique for this problem. A novel particle swarm based algorithm namely, modified chaotic ant swarm optimization (MCASO) and real coded GA (RGA) prove to be competitively the best. A conventional PSO and binary coded GA are the other two techniques, yielding sub-optimal performances. A DISCO can contract individually and multilaterally with a GENCO for power and these transactions are done under the supervision of the ISO. In this paper, the concept of DISCO participation matrix is used to simulate the bilateral contracts in the four area diagram. The computed values of enerators’ participation and tie-line power exchanges match with the corresponding actual values obtained by MATLAB-SIMULINK. Optimal transient responses are determined by substituting the optimal gains in the MATLAB- IMULINK based four-area multi-units diagram.
INTRODUCTION
AUTOMATIC Generation Control (AGC) is a very important issue in power system operation and control for supplying sufficient and reliable electric power with good quality. AGC with load following is treated as an ancillary service that is essential for maintaining the electrical system reliability at an adequate level. The main objectives of the AGC in multi-area restructured power system are maintaining zero steady state errors for frequency deviation and accurate tracking of load contracts demanded by DISCOS. In addition, the power system should fulfill the requested dispatch conditions .In an open energy market, generation companies (GENCOs) may or may not participate in the AGC task. On the other hand, a distribution company (DISCOs) may contract individually with a GENCO or independent power producers (IPPs) for power in its area or other areas. Currently these transactions are done under the supervision of the independent system operator (ISO). The values of GENCOs participations and tie-line power exchanges are computed by some unique equations proposed by the authors and then validated by MATLAB-SIMULINK.
چکیده
در این مقاله، کنترل کننده تولید اتوماتیک چند واحد واحد چهار منطقه در سیستم قدرت بازسازی شده مورد مطالعه قرار گرفته است. انواع مختلفی از خدمات جانبی در سیستم قدرت وجود دارد. یکی از این خدمات فرعی، بارگیری است که با کنترل فرکانس همراه است که عموما تحت کنترل نسل خودکار در سیستم قدرتمند بازسازی شده است. هدف اصلی مقاله، معرفی برخی از تکنیک های مبتنی بر محاسبات تکاملی جدید است که به طور مستقل به منظور به دست آوردن پارامترهای بهینه بهینه برای اجرای مطلوب گذرا در شرایط مختلف سیستم عمل می کنند. نتایج محاسباتی و عملکرد موقت در مقایسه با نهایتا تعیین بهترین تکنیک بهینه سازی برای این مشکل است. یک الگوریتم مبتنی بر نوآوری ذرات یعنی یعنی بهینه سازی مشتق شده ی هرج و مرج اصلاح شده (MCASO) و واقعی GA (RGA) ثابت شده است که به صورت رقابتی بهترین است. یکی از دو تکنیک PSO معمولی و دوتایی کد شده GA است که عملکرد پایین مطلوب را ارائه می دهد. DISCO می تواند به طور جداگانه و چند جانبه با GENCO برای قدرت قرارداد و این معاملات تحت نظارت ISO انجام می شود. در این مقاله، مفهوم ماتریس مشارکت DISCO برای شبیه سازی قراردادهای دو جانبه در چهار نمودار منطقه مورد استفاده قرار می گیرد. مقادیر محاسبه مشارکت ژنراتورها و مبادلات قدرت خطی مطابق با مقادیر واقعی مربوط به MATLAB-SIMULINK می باشد. پاسخ های گذرا بهینه با جایگزینی سود بهینه در نمودار متشکل از چندین واحد چهار منطقه با MATLAB-IMULINK تعیین می شود.
مقدمه
کنترل تولید خودکار (AGC) یک مسئله بسیار مهمی در کارکرد سیستم قدرت و کنترل برای تامین برق کافی و قابل اطمینان با کیفیت خوب است. AGC با بارگیری زیر به عنوان یک سرویس اضافی مورد استفاده قرار می گیرد که برای حفظ قابلیت اطمینان سیستم در سطح کافی ضروری است. اهداف اصلی AGC در سیستم قدرتمند بازسازی شده چند منطقه، حفظ صفر حالت پایدار برای انحراف فرکانس و ردیابی دقیق قراردادهای بار مورد نیاز DISCOS است. علاوه بر این، سیستم قدرت باید شرایط ارسال درخواست را برآورده کند. در بازار انرژی باز، شرکت های تولیدی (GENCO) ممکن است یا ممکن نیست در کار AGC شرکت کنند. از سوی دیگر، شرکت توزیع کننده (DISCO) ممکن است به طور جداگانه با یک GENCO یا تولید کننده مستقل قدرت (IPP) برای قدرت در منطقه خود و دیگر مناطق قرارداد کند. در حال حاضر این معاملات تحت نظارت اپراتور سیستم مستقل (ISO) انجام می شود. مقادیر مشارکت GENCO و مبادلات قدرت خطی با استفاده از معادلات منحصر به فرد پیشنهاد شده توسط نویسندگان محاسبه شده و سپس توسط MATLAB-SIMULINK تأیید شده است.
Year: 2009
Publisher : IEEE
By : Ranjit Roy , S. P. Ghoshal , Praghnesh Bhatt
File Information: English Language/ 6 Page / size: 269 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1388
ناشر : IEEE
کاری از : رنجیت روی، S.P. Ghoshal، Praghnesh Bhat
اطلاعات فایل : زبان انگلیسی / 6 صفحه / حجم : KB 269
نقد و بررسیها
هنوز بررسیای ثبت نشده است.