توضیحات
ABSTRACT
In this study, a electrochemical sensor based on smart textile was fabricated. The smart conductive textiles was prepared using coating of a cotton fabric by different four conductive particles include single and multi- wall carbon nanotube, graphene oxide and silver nanoparticles and their conductivity properties was compared together. The scanning electron microscope was used to observation of surface morphology of the fabric samples. The coated fabric by silver nanoparticles has highest conductivity in compared with carbon coated fabrics. The performance of Ag coated fabric was evaluated as a working electrode.
INTRODUCTION
Electrically conductive textiles have been of increasing research interest due to potential application in clothing as well as in the medical and military fields, as sensors, actuators, electromagnetic shields etc . Sensors provide a nervous system to detect signals, thus in a passive smart material, the existence of sensors is essential. Textile-based sensing has been a large field of research in the biomedical and safety communities . These sensors can be used for electrocardiogram , flexible solar cell panels , protective garments for electromagnetic shielding and static charge dissipation , heating elements , fabrics for dust and germ-free clothes , pressure sensors , chemical sensors , power sources , and wireless devices . Conductive textiles by incorporating CNT through a coating or dyeing process are already studied by many authors . The excellent mechanical, electrical, and thermal properties of CNT and their high aspect ratios make them one of the most interesting nanoparticles in the technology world today. There are many different types of CNT, but they are normally classified as either single-wall (SWNTs) or multi-wall nanotubes (MWNTs), which have lengths of ~10 μm. On the other hand, in literatures was observed that metal nanoparticles was deposited on fabrics for preparation of conductive textiles using in situ synthesis or Inkjet printing methods . Recently, Govaert and Vanneste (2014) were developed the electrical conductivity textile by coating of CNT using direct coating, transfer coating, and screen printing methods . The electrically-conducting MWCNT networks was formed on cellulose mono- and multi-filament fiber surfaces by Qi and co wrokers . Nafeie et al, fabricated conductive wool fabrics multiwall carbon nanotube and carboxylated multiwall carbon nanotube (FMWCNT). They said that samples treated with FMWCNT exhibited conductivity 10 times higher than MWCNT, because there is interactions between the functional groups of wool and carboxyl groups of FMWCNT.
چکیده
در این مطالعه یک سنسور الکتروشیمیایی بر اساس پارچه هوشمند ساخته شد. پارچه های رسانای هوشمند با استفاده از پوشش پارچه پنبه با چهار ذره هدایت کننده مختلف شامل نانولوله های کربنی تک و چند دیواره، اکسید گرافن و نقره و خواص هدایت پذیری آنها با هم مقایسه شدند. میکروسکوپ الکترونی اسکن برای مشاهده مورفولوژی سطح نمونه های پارچه مورد استفاده قرار گرفت. پارچه پوشش داده شده توسط نانوذرات نقره دارای بالاترین رسانایی در مقایسه با پارچه های پوشش داده شده با کربن است. عملکرد پارچه پوشش داده شده به عنوان یک کار الکترود مورد بررسی قرار گرفت.
مقدمه
به دلیل استفاده بالقوه در لباس و همچنین در زمینه های پزشکی و نظامی، به عنوان حسگرها، محرک ها، سپر های الکترومغناطیسی و غیره، منسوجات الکتریکی هدایت شده اند. سنسورها یک سیستم عصبی را برای تشخیص سیگنال فراهم می کنند، بنابراین در یک مواد هوشمند منفعل، وجود حسگر ضروری است. سنجش بر مبنای نساجی یک زمینه تحقیق گسترده در جوامع زیست پزشکی و ایمنی بوده است. این سنسورها را می توان برای الکتروکاردیوگرام، پانل های سلول خورشیدی قابل انعطاف، لباس های محافظ برای محافظت الکترومغناطیسی و انحلال اتهام اتهام، عناصر گرما، پارچه های گرد و غبار و لباس های بدون قارچ، سنسورهای فشار، سنسورهای شیمیایی، منابع قدرت و دستگاه های بی سیم استفاده کرد. منسوجات هدایت شده با ترکیب CNT از طریق یک پوشش یا فرآیند رنگرزی، توسط بسیاری از نویسندگان مورد مطالعه قرار گرفته است. خواص مکانیکی، الکتریکی و حرارتی CNT و نسبت های نسبتا بالای آنها، آنها را یکی از جالب ترین نانو ذرات در دنیای تکنولوژی امروز می دانند. انواع مختلفی از CNT وجود دارد، اما آنها به طور معمول به عنوان یک دیواره تک دیواره (SWNTs) یا چند نانو لوله (MWNTs) طبقه بندی می شوند که طول آن ها حدود 10 μm است. از سوی دیگر، در ادبیات مشاهده شد که نانوذرات فلز بر روی پارچه ها برای تهیه پارچه های رسانا با استفاده از سنتز در محل یا روش چاپ جوهر افشان گذاشته شده اند. اخیرا Govaert و Vanneste (2014) نسل هدایت الکتریکی با پوشش CNT با استفاده از پوشش مستقیم، پوشش انتقال و روش های چاپ روی صفحه نمایش طراحی شده اند. شبکه های MWCNT با هدایت الکتریکی روی سطوح فیبر سلولی و چند رشته با Qi و co wrokers تشکیل شده است. Nafeie و همکاران، نانو لوله کربنی چند کربنی و نانولوله کربنی چند کربنی کربوکسیل شده (FMWCNT) ساخته شده است. آنها گفتند که نمونه هایی که توسط FMWCNT تحت درمان قرار می گیرند، هدایت 10 برابر بیشتر از MWCNT را نشان می دهند، زیرا تعاملات بین گروه های کاربردی پشم و گروه های کربوکسیل FMWCNT وجود دارد.
Year: 2017
Publisher : National Congress of Chemistry and Nanoscience, from Research to National Development
By : Mohammad Dehghani, Navid NasirizadehMohammad Esmaiel Yazdanshenas
File Information: English Language/ 7 Page / size: 418 KB
سال :1396
ناشر : کنگره ملی شیمی و نانوشیمی,از پژوهش تا توسعه ملی
کاری از : محمد دهقانی، نوید نصیریزاده محمد اسماعیل یزدانشناس
اطلاعات فایل : زبان انگلیسی / 7 صفحه / حجم : KB 418
نقد و بررسیها
هنوز بررسیای ثبت نشده است.