توضیحات
چکیده
مخلوط دو يا چند ماده با ترکيب و خواص معين بطوريکه در مجموعه سيستم هر کدام با مشخصات فيزيکي و مکانيکي خاص خود ظاهر مي شوند. مهمترين اختلاف بين آلياژ ها(مواد تک سازه ) و کامپوزيت ها(مواد چند سازه ) از همين ويژگي حاصل مي شود. دليل استفاده از کامپوزيت ها ، برتري خواص مواد کامپوزيت نسبت به خواص اجزاء آن بطور مجزا مي باشد.
مقدمه
MMCها از يک زمينه فلزي نرم و افزودني استحکام بخش (معمولاً ماده سراميکي ) جهت تأمين استحکام وسفتي مناسب تشکيل شده اند.
کامپوزيت هاي زمينه فلزي در مقايسه با زمينه پليمري ، استحکام ، سختي و سفتي بالاتري دارند.
استحکام به شکست آنها بالاتر از ساير مواد کامپوزيتي مي باشد.
دماي کاربردي آنها در مقايسه با کامپوزيت هاي زمينه پليمري فوق العاده بالاتر است .
کامپوزيت هاي زمينه پليمري
قابليت توليد توسط اکثر روش هاي توليد، چگالي پايين ، خواص مکانيکي خوب شيميايي
دو نوع مواد پليمري در کامپوزيت ها بکار مي روند که عبارتند از مواد ترمو پلاستيک و ترموست
جهت توليد PMC ها از روش هاي فشاري ، تزريقي ، اکستروژن استفاده مي شود.
معروف ترين آنها پلي اتيلن ، پلي استارين ،پلي کروکلن و… مي باشند.
ABSTRACT
Mixture of two or more substances with certain composition and properties as they appear in the system complex, each with its own physical and mechanical properties. The most important difference between alloys (single-structure materials) and composites (multi-structure materials) is obtained from this feature. The reason for using composites is the superiority of the properties of the composite materials over the properties of its components.
INTRODUCTION
MMCs consist of a soft, metallic backing material (usually ceramic material) to provide good rigidity.
Metal composites have higher strength, stiffness and stiffness compared to polymeric surfaces.
Failure Their fracture toughness is higher than other composite materials.
Their application temperature is much higher than that of polymeric composites.
Production Production capability by most production methods, low density, good chemical mechanical properties
Two types of polymeric materials are used in composites: thermoplastic and thermostable materials
PMC Compressive, injection, extrusion methods are used to produce PMCs.
The most famous are polyethylene, polystyrene, polychlorine, etc.
Year: ۲۰۱۲
Source : ۰
By : 0
File Information: persian Language/ 23 Page / size: 599 KB
سال : ۱۳۹۱
منبع : ۰
کاری از : ۰
اطلاعات فایل : زبان فارسی / 23 صفحه / حجم : 599 KB
نقد و بررسیها
هنوز بررسیای ثبت نشده است.