توضیحات
چکیده
در اين پژوهش تأثير سيكل هاي آنيل بي بحن نرا ي مستقيم و پيوسته بر روي ريزساختار فولاد دو فازي نوع كم كربن-منگنز دار ،st-52پس انجام عمليات حرارتي همگن سازي و نرماله كردن بر ساختار ميكروسكپي و خواص مكانيكي مورد مقايسه و بررسي قرار گرفته است. با استفاده از عمليات همگن سازي ريزساختار فريت ـ پرليتي عاري از باندينگ در فولاد اولية كربن منــگنزدار بوجود آمد . بــا عمليات نرماله كردن، ريزساختاري شامل دانه هاي ريز از فريت و پرليت بدست آمد . سيكل هاي دوفازي كردن آنيل مستقيم و پيوسته ، در دماهاي بين بحراني مختلف موجب تهيه فولادهاي دوفازي با كسر حجمي و مورفولوژي متفاوتي از مارتنزيت شد نتايج مشــاهدات ريز ساختاري حاكي از ايــن است كه در عمليــات آنيــل بین بحراني به روش مستقيم ، فاز مــارتنزيت عمدتــاً در مرز دانه هــاي فريــت تشكيــل شده و به صورت پیوسته مي باشد ، همچنين در عمليات آنيل بين بحراني به روش پيوسته ، اين فاز به صورت كلوني هاي درشت تشكيل مي شود . مشاهده شد كه در گستره وسيعي از دماهاي بين بحراني كسر حجمي مارتنزيت بدست آمده از نمونه هاي همگن و آنيل پيوسته بيشتر مي باشد.اندازه كلوني هاي مارتنزيت در فولاد دوفازي بدست آمده از آنيل پيوستة فولاد اوليه همگن شده از ساير سيكلهاي عمليات حرارتي بزرگتر مي باشد . ساختار دوفازي بدست آمده توسط آنيل پيوسته داراي سختي بيشتري نسبت به آنيل مستقيم است .
مقدمه
مشخصه اصلي انتخاب مواد براي استفاده در صنايع مختلف و يا حتي كاربردهاي نظامي و فضايي، تركيبي از ميزان كارآيي و قيمت نهايي آنها مي باشد. لذا همواره تلاش مي شود موادي مـورد اسـتفاده قـرار گيـرد كـه ضمن كارآيي بسيار بالا، از قيمت مناسبي نيز برخـوردار باشـد. در ايـن راسـتا توليـد فولادهـاي كـم آليـاژ بـا استحكام بالا، بخصوص فولادهاي دوفازي، ابداع و گسترش وسيعي يافته است. تاثير پارامترهاي ريزساختاري نظير كسر حجمي و مورفولوژي مارتنزيت و اندازة دانة فريت بر خـواص مكانيكي و خستگي فولادهاي فريت مارتنزيتي مورد بررسي قرار گرفته اند. ولي تـاكنون تاثير سيكلهاي عمليات حرارتـي ، همگـن سـازي فـولاد اوليـه و نرمالـه كـردن فـولاد اوليـة همگـن شـده بـر ريزساختار و سختي فولاد دوفازي چندان مورد توجه قرار نگرفته است . بـر ايـن اسـاس در ايـن پـژوهش بـه مقايسه دو سيكل عمليات حرارتي همگن سازي و نرماله كـردن فـولاد اوليـه بـر سـختي و ريزسـاختار فـولاد دوفازي بدست آمده از دو سيكل آنيل بين بحراني مستقيم و پيوسته مي پردازيم.
ABSTRACT
In this research, the effect of direct and continuous annealed cycles on microstructure of low-carbon-manganese type st-52 steel, after homogenization and normalizing heat treatment on microscopic structure and mechanical properties were compared. Is. The homogeneous microstructure of free bonding perlite ferrite was developed in the first steel of carbon monoxide. With the smoothing operation, a microstructure including fine grains of ferrite and perlite was obtained. The direct and continuous anilic doped cyclic cycles produced different levels of morphology and morphology of martensite at different inter-critical temperatures. The results of the microstructure observations indicate that in the direct-inter-critical aniline operation, the martensite phase is mainly on the boundary Ferrite grains are formed continuously, also in continuous inter-critical aniline operation, this phase is formed as large colonies. It was observed that in a wide range of intercritical temperatures, the martensitic volume fraction obtained from homogeneous and continuous anil is higher. The magnitude of martensite colonies in double-phase steel obtained from the homogeneous homogeneous continuum of homogeneous steel is greater than the other cycles of thermal operation. . The two-phase structure obtained by continuous aniline has a higher hardness than direct aniline.
INTRODUCTION
The main characteristic of material selection for use in various industries or even military and spatial applications is a combination of their efficiency and their final price. Therefore, it is always trying to use materials that, at the same time, are of great value, are of great value. In this regard, the production of high-strength low-alloy steels, especially double-foam steels, has been widely developed and developed. The effect of microstructural parameters such as martensitic volume and morphology fraction and the size of ferrite knowledge on mechanical properties and fatigue of martensitic ferrite steels have been studied. But so far, the effect of thermal cycles, homogenization of primary steel and the initialization of homogeneous steel on the microstructure and hardness of two-phase steel have not been taken into consideration. Accordingly, in this study, we compare the two cycles of heat treatment of homogenization and initialization of the steel on the hardness and microstructure of the two-phase steel obtained from two direct and continuous intercrystal aniline cycles.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Ali Ghahiri , Hassan Sharifi , Ali Shafiee , Mohammad Hassan Jolazadeh
File Information: persian Language/ 11 Page / size: 1,66 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : علي قاهري , حسن شريفي , علي شفيعي ,محمد حسن جولازاده
اطلاعات فایل : زبان فارسی / 11 صفحه / حجم : KB 1,66
نقد و بررسیها
هنوز بررسیای ثبت نشده است.