توضیحات
چکیده
در ديوارهاي برشي فولادي داراي دو بازشو ، پانل بين بازشوها به لحاظ عملكرد با يك تير شبيه سازي مي شود كه بسته به نسبت ابعاد، رفتاري به صورت برشي يا خمشي صرف و يا به صورت رفتار برشي و خمشي توأم خواهد داشت. با فرض در نظر گرفتن سخت كننده هاي دو گانه در طرفين پانل مياني؛ سخت كننده هاي مذكور؛ همانند ستونهاي پانل بين بازشوها كه خود قابل مقايسه با يك سيستم ديوار برشــي فولادي مي باشد؛ رفتار كرده و لازم است براي اطمينان از وقوع جاري شدن برشي ورق فولادي پانل ميـاني پيش از جـاري شدن سخت كننده هاي طرفيـن آن در اثر خمـش، مساحـت سخت كننده هاي مذكور از حد معيني كمتر نباشد؛ از طرفي در تعيين رفتار پانل مياني به لحاظ رفتار خمشي يا برشي، نسبت ابعاد آن تأثير گذار خواهد بود. در اين مقاله، پانل مياني نازك بين بازشوها با استفاده از مدلسازي عددي با نرم افزار اجزاي محدود ABAQUS مورد مطالعه قرار داده شده است.
مقدمه
ديوارهاي برشي فولادي كه به صورت تقويت شده و بدون تقويت و نيز با فرض وجود بازشو و يا عدم وجود آن، طراحي و ساخته مي شوند، به عنوان يكي از سيستم هاي باربر جانبي داراي مزاياي متعدد و ممتاز نسبت به ساير سيستم ها، در سالهاي اخير توسط محققين كشورهاي متفاوتي مورد مطالعه قرار داده شده اند. برخي از مزاياي استفاده از ديوارهاي برشي ساخته شده از ورق هاي فولادي به عنوان يكي از سيستم هاي مقاوم در برابر بارهاي جانبي عبارتند از: شكل پذيري بالا و قابليت جذب انرژي زياد، سهولت اجرايي، دارا بودن سختي اوليه بالا كه در محدود ساختن ميزان تغيير مكان جانبي بخصوص در سازه هاي بلند بسيار اثرگذار خواهد بود، داشتن وزن كمتر در مقايسه با نمونه هاي بتني مشابه و به تبع آن كاهش وزن سازه كه در ميزان كاهش برش پايه مؤثر مي باشد. تا پيش از پژوهش انجام شده در دهه ،1980حالت حدي طراحي، براي طراحي ديوار هاي برشي ساخته شده از ورق هاي فولادي؛ تنها با كنترل شرايط وقوع كمانش خارج از صفحه پانل هاي پر كننده مورد بررسي قرار مي گرفت. ايده استفاده از مقاومت پس كمانشي ديوارهاي برشي فولادي براي اولين بار توسط توربرن در سال 1983فرمول نويسي شده و سپس در همان سال توسط تيملر و كولاك با انجام مطالعات آزمايشگاهي صحت روابط مورد بررسي قرار گرفت. قابليت جذب انرژي پانلهاي با صفحات پركننده تقويت نشده در همين سال توسط محققان مذكور مورد بررسي قرار داده شد.
ABSTRACT
In steel shear walls with two openings, the panel between the openings is simulated in terms of performance with a beam, depending on the aspect ratio, the behavior is either shear or flexural, or as a shear and bending behavior. By assuming that the dual hardeners are located on the sides of the middle panel; the aforementioned hardeners, such as the panel pillars of the openings, which are themselves comparable to a steel shear system, are treated and necessary to ensure that the shear flow occurs The middle panel steel sheet prior to the bending of the two sides, the surface area of the hardening agents is not less than a certain amount; on the other hand, determining the behavior of the middle panel in terms of bending or shear behavior, its aspect ratio will be affected. In this paper, a thin intermediate panel between openings using numerical modeling with ABAQUS finite element software has been studied.
INTRODUCTION
The steel shear walls, which are reinforced and reinforced, and with the assumption of its opening or absence, are designed and constructed as one of the side loader systems with numerous and superior advantages over other systems in the years Recent research has been researched by researchers from different countries. Some advantages of using shear walls made of steel sheets as one of the systems that are resistant to lateral loads include high ductility and high absorption capacity, ease of operation, high initial hardness that limits the amount of change The lateral location will be particularly effective in long structures, having less weight than comparable concrete specimens and, consequently, reducing the weight of the structure, which is effective in reducing the amount of cutting. Until the research in the 1980s, the design limit was designed to design the shear walls made of steel sheets; only by controlling the buckling conditions outside the plate of the filling panels. The idea of using the buckling resistance of steel shear walls was formulated for the first time by Thurberen in 1983, and then by Timmler and Koulak in the same year, laboratory tests were carried out to verify the relationship. The energy absorption capacity of panels with non-reinforced filler sheets in the same year was investigated by the researchers.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Saeed Sabouri, Elnaz Ahori, Salah al-Din Mam Azizi
File Information: persian Language/ 8 Page / size: 2.26 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : سعيد صبوري ، الناز آهوري ، صلاح الدين مام عزيزي
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 2.26
نقد و بررسیها
هنوز بررسیای ثبت نشده است.