توضیحات
چکیده
از سال 1970ميلادي تاكنون سازه هاي مهمي با بكارگيري سيستم ديوارهاي برشي فولادي ساخته شده است و تحقيقات آزمايشگاهي و نظري انجام شده روي ديوارهاي برشي فولادي همگي نشانگر اين است كه سيستم مذكور در مناطق با لرزه خيزي بالا عملكرد بسيار مطلوبي دارد و رفتار سازه هاي اجرا شده با سيستم ديوارهاي برشي فولادي در زلزله هاي شديد مانند زلزله كوبه و نورث ريچ مطلوب بوده است و اين سيستم داراي مزايا و برتري هاي بسيار زيادي نسبت به ساير سيستم هاي مقاوم جانبي ديگر مي باشد. در اين مقاله با استفاده از مدل هاي متعدد ديوارهاي برشي فولادي كه در نرم افزار ANSYSساخته و تحليل شده به بررسي اثر پارامتر بسيار مهم نسبت لاغري (b/t) بر روي رفتار لرزه اي سيستم ديوارهاي برشي فولادي پرداخته شده است. بدين منظور ابتدا با استفاده از دو مدل معتبر آزمايشگاهي ويك مدل معتبر نظري، مدلسازي صورت گرفته در نرم افزار ANSYSصحت سنجي شده كه حاكي از برازش بسيار خوب نتايج حاصل از نرم افزار و نتايج بدست آمده از آزمايش است. همچنين نتايج تحليل هاي صورت گرفته اينطور نشان مي دهد در صورتي كه اين سيستم با نسبت لاغري موثري طرح گردد عملكرد بسيار مطلوبي خواهد داشت.
مقدمه
ديوار هاي برشي فولادي ( SSW)براي گرفتن نيرو هاي جانبي زلزله و باد در ساختمان ها، بويژه در ساختمان هاي بلند در سه دهه اخير مطرح و مورد توجه قرار گرفته است اين پديده نوين كه در جهان به سرعت رو به گسترش مي باشد در ساخت ساختمان هاي جديد و همچنين تقويت ساختمان هاي موجود بخصوص در كشور هاي زلزله خيزي همچون آمريكا و ژاپن بكار گرفته شده است. ديوار هاي برشي فولادي از ورق فولادي كه توسط تير ها و ستون ها احاطه شده است ، تشكيل گرديده اند. كه به تيرها و ستون ها عناصر مرزي يا محيطي مي گويند. ديوارهاي برشي فولادي مشابه تير ورق طره اي عمل مي نمايند كه در آن ستون ها به منزله بال هاي آن ، تير هاي طبقات همانند سخت كننده هاي آن و ورق هاي فولادي به عنوان جان آن مي باشند.
ABSTRACT
Since the 1970s, important structures have been built with the use of steel shear walls, and laboratory and theoretical research on steel shear walls all indicate that the system has a very good performance in high seismicity and the behavior of the structures implemented With a system of steel shear walls in severe earthquakes like earthquakes? Cobbe and North Ritch have been optimized, and this system has many advantages and disadvantages compared to other side-mounted systems. In this paper, using the various models of steel shear walls developed and analyzed in ANSYS software, we investigate the effect of the very important slip ratio (b / t) on the seismic behavior of the steel shear walls system. For this purpose, firstly, using validatory and valid models of theoretical model, the ANSYS software modeling has been verified, which indicates the very good fit of the results of the software and the results obtained from the experiment. Also, the results of the analysis show that if this system is designed with effective weight ratio, it will perform very well.
INTRODUCTION
Steel shear walls (SSWs) have been considered to capture the earthquake and wind forces in buildings, especially in high-rise buildings in the last three decades. This new phenomenon, which is rapidly developing in the world, is under construction. New buildings, as well as strengthening of existing buildings, especially in seismic countries such as the United States and Japan, have been used. Steel shear walls are made up of steel plate surrounded by beams and columns. Which refers to the edges and columns of the boundary or environmental elements. The steel shear walls are similar to the strut beam, in which the columns are its wings, the beams of the floors, the hardening ones, and the steel sheets.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Ehsan Yemini , Fereydoon Iranian
File Information: persian Language/ 8 Page / size: 745 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : احسان يميني ، فريدون ايراني
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 745
نقد و بررسیها
هنوز بررسیای ثبت نشده است.