توضیحات
چکیده
درپي زلزله هاي اخير مباحث طراحي بر اساس عملكرد، بررسي شريان هاي حياتي و مقاوم سازي و بهسازي لرزه اي سازه هاي موجود و حياتي مطرح گرديده است. در اين بين سازه هاي بتني با توجه به گسترش روزافزون در ايران و در نظر گرفتن ضعف هاي دروني و مدهاي گسيختگي ميبايست در مقابل زلزله ها مقاوم سازي گردند يا اينكه تمهيداتي جهت كاهش و به حداقل رساندن مدهاي گسيختگي انجام گيرد. در اين مقاله به مدهاي مختلف تقويت سازه هاي بتن آرمه توسط كامپوزيت هاي FRPجهت جلوگيري از گسيختگي مورد نظر در اين سازه ها پرداخته شده است و حالتهاي مختلف تقويت اعضاي قابي با استفاده از نرم افزار ABAQUSارزيابي و مقايسه شده است.
مقدمه
سازه هاي بتن آرمه، بخشي از سازه هاي قابي را تشكيل ميدهند كه در كشور ما جزء ساختمان هاي بسيار متداول ميباشند، اكثر ساختمان هاي بتن آرمه موجود جزء سازه هاي نيمه مقاوم و يا غيرمقاوم طبقه بندي ميشوند؛ پس با توجه به اين كه قابهاي بتن آرمه شالوده و چارچوب اصلي سازه هاي بتن آرمه را تشكيل ميدهند، لذا بهسازي و مقاوم سازي آنها نقش مهم و موثري در عملكرد مناسب سازه هاي مذكور در برابر زلزله ايفاء ميكند. براي مقاوم سازي و بهسازي قابهاي بتنآرمه و اعضاي مربوطه روشهاي متفاوتي مرسوم ميباشد، كه از مهمترين اين روشها ميتوان به بهره گيري از ورقه هاي الياف پليمري مركب (FRP) و دور پيچ كردن اعضا قابي با آنها اشاره نمود. اكثر پژوهش هاي به عملآمده در زمينه مقاوم سازي و ترميم با FRPبر روي تير و ستونها متمركز بوده اند و در اين ميان بسيار كمتر به قابهاي بتن آرمه، كه چارچوب اصلي و باربر سازه هاي بتن آرمه در مقابل بارهاي جانبي و زلزله را تشكيل ميدهند و متشكل از تيرها، ستونها و اتصالات ميباشند، پرداخته شده است. لذا مطالعات محدود بر روي قابهاي بتن آرمه بهسازي شده با كامپوزيتهاي FRPباعث شد كه در اين تحقيق رفتار قابهاي بتن آرمه بهسازي شده با اين كامپوزيتها در حالتهاي مختلف تقويت ارزيابي و مورد بررسي قرار گيرد. Pماده كامپوزيتي با مقاومت كششي بالاست كه با رزين آغشته شده است كه به دليل مقاومت كششي بالا، وزن پايين و دوام مناسب (در مقابل خوردگي) داراي كاربرد گسترده در مقاوم سازي سازه هاي بتني در مقابل نيروي زلزله است. كامپوزيتها موادي هستند كه از 2قسمت تشكيل شده اند قسمت اول ماده كامپوزيت كه قسمت باربر آن نيز محسوب ميشود، الياف هستند. قسمت دوم كه بيشتر نقش نگهداري الياف را در كنار يكديگر بر عهده دارد، چسب يا زرين ناميده ميشود.
ABSTRACT
In recent years, recent disasters have been discussed based on performance, vital arteries, rehabilitation and seismic reconstruction of existing and vital structures. In this regard, concrete structures with regard to the increasing expansion in Iran and considering internal weaknesses and failure modes should be strengthened against earthquakes, or measures to reduce and minimize failure patterns. In this paper, various modalities of reinforcement of reinforced concrete structures by FRP composites have been investigated in order to prevent the failure of these structures. Different modes of reinforcement of bare members using ABAQUS software have been evaluated and compared.
INTRODUCTION
Reinforced concrete structures form part of framing structures that are very common in our country. Most of the reinforced concrete structures are classified as semi-resistant or non-resistant structures; therefore, considering that concrete frames The reinforcement forms the basis and main framework of reinforced concrete structures, therefore their upgrading and retrofitting play an important and effective role in the proper functioning of the structures against earthquakes. Different methods are commonly used for retrofitting and repairing concrete frames and their respective members, the most important of which is the use of composite polymer fibrous sheets (FRP) and the screwing of bare members with them. Most of the research on reinforcement and repair with FRP has focused on the beam and columns, and in this case, much less are the reinforced concrete frames, which constitute the main frame and the barrier of reinforced concrete structures against lateral loads and earthquakes, and It consists of beams, columns and fittings. Therefore, limited studies on reinforced concrete frames reinforced with FRP composites resulted in the evaluation of the behavior of reinforced concrete frames modified with these composites in different conditions. P is a composite material with a high tensile strength, which is impregnated with resin, which due to its high tensile strength, low weight and durability (against corrosion), is widely used in the reinforcement of concrete structures against earthquake forces. Composites are materials made up of 2 parts. The first part of the composite material, which is also the bearing part, is fibers. The second part, which holds most of the fiber holding role together, is called glue or golden.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Hameed MaKhodomi, Reza Jalal Kamali
File Information: persian Language/ 8 Page / size: 527 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : حامدمخدومي ،رضا جلال كمالي
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 527
نقد و بررسیها
هنوز بررسیای ثبت نشده است.