توضیحات
چکیده
قابهای فولادی تیر مرکب با اتصالات نیمه صلب سیستم های سازه ای نوینی هستند که برای بهره گیری از عملکرد توام دالها و اتصالات نیمه صلب در سیستم سازه مورد استفاده قرار می گیرند . در این مقاله ، ابتدا به مدلسازی سه بعدی المان محدود قاب مرکب نیمه صلب یک طبفه دو دهانه با استفاده از نرم افزار ABAQUSپرداخته شده ، سپس تحت تحلیل دینامیکی تاریخچه زمانی و تحلیل پوش آور ، در حالت با و بدون صفحه پشتیبان و در حالت سیستم سازه ای قاب با دال بتنی و قاب با دال صفحه فولادی ذوذنقه ای ، به بررسی رفتار دینامیکی این قابها ، منحنی های ظرفیت پوش آور بدست آمده تحت بارگذاری های جانبی مودال و یکنواخت ، منحنی های ظرفیت تحت تحلیل دینامیکی تاریخچه زمانی و نحوه توزیع مفصل پلاستیک در قاب مدل شده پرداخته شده و ضرایب لرزشی استاتیکی و دینامیکی قاب مرکب ، برای تحلیل عملکردهای دینامیکی بدست آورده شده است.
مقدمه
در سالهای اخیر استفاده از سیستم های ترکیبی دال بتنی و تیر فولادی به خاطر بهره گیری از خصوصیات توام بتن و فولاد ( مقاومت و شکلپذیری فولاد در برابر کشش و سختی بتن در فشار ) و رفع نواقص هریک توسط دیگری رشد چشم گیری داشته است .استفاده از اتصالات نیمه صلب فولادی در این تیرها می تواند رفتار مطلوب تری از سازه را در مقایسه با سازه های فاقد تیر مرکب به همراه داشته باشد . زیرا همانطور که ذکر شد استفاده از تیرهای مرکب بتنی ، فولادی در راستای بهره وری از مصالح موجود است و همچنین استفاده از اتصالات نیمه صلب فولادی نیز نسبت به اتصالات مفصلی در راستای بهره وری است. لذا استفاده توام ایندو می تواند گام موثر تری باشد.هدف این مقاله بررسی رفتار دینامیکی قاب های مرکب با اتصالات نیمه صلب می باشد . بدین منظور ، قاب سه بعدی دودهانه یک طبقه با سه نوع اتصال صلب ، نیمه صلب و مفصلی به وسیله نرم افزار المان محدود ABAQUSشبیه سازی شده است . سپس با اضافه کردن ورق پشتیبان به منظور تقویت ناحیه چشمه اتصال ستون، و مقایسه آن با حالت بدون ورق پشتیبان به بررسی خصوصیات سازه تحت اثر این المان می پردازیم و قاب را تحت تحلیل های پوش آور و تحلیل تاریخچه زمانی قرار داده می شود . شبیه سازی دینامیکی این قابها داده هائی را به منظور تعریف ضرایب رفتار و منحنی ظرفیت را برای ما فراهم می کند.
ABSTRACT
Steel frames are combined with semi-rigid fittings of new structural systems that are used to exploit the joint performance of slabs and semi-rigid joints in the structural system. In this paper, first, 3D modeling of the semi-rigid composite semi-rigid element of a two-span texturing framework using ABAQUS software was first studied, then under dynamic analysis of temporal and temporal analysis, in the case with and without the backup screen, and in the structural system mode A frame with a concrete slab and a frame with a slab of a steel plate, examines the dynamic behavior of these frames, the capping curves obtained under modal and uniform lateral loading, the capacity curves under the dynamic analysis of the timekeeping and distribution of the plastic joint in The modeling frame has been studied and the static and dynamic vibrational coefficients of the composite frame for t Lille dynamic performance is achieved.
INTRODUCTION
In recent years, the use of combined concrete slabs and steel beams has been dramatically improved due to the use of concrete and steel properties (strength and strength of steel against tensile strength and hardness of concrete in pressure) and the elimination of defects by each other. The semi-rigid steel fittings in these beams can lead to a more favorable behavior of the structure compared to structures without a composite beam. Because, as mentioned, the use of concrete composite beams is steel for the benefit of materials, as well as the use of semi-rigid steel fittings as well as joint joints in line with efficiency. Therefore, the same use can be a more effective step. The purpose of this paper is to examine the dynamic behavior of composite frames with semi-rigid connections. For this purpose, a three-dimensional three-dimensional three-dimensional three-dimensional frame with three types of rigid, semi-rigid and articulated joints is simulated by ABAQUS finite element software. Then, by adding a backup sheet to reinforce the connection area of the column, and comparing it with the non-sheetless state, we examine the structural properties under the influence of this element and place the frame under pivot analysis and time history analysis. Dynamic simulation of these frames provides data for us to define the behavior coefficients and the capacity curve.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Mojtaba Fathi, Hamid Reza Ghanbari Rafatieh
File Information: persian Language/ 8 Page / size: 759 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : مجتبی فتحی ، حمیدرضا قنبری رفعتیه
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 759
نقد و بررسیها
هنوز بررسیای ثبت نشده است.