توضیحات
چکیده
در اين مقاله طراحي و ساخت يك مقسم/ تركيب كننده فضايي توان 16راهه پهن باند انجام شده است. در اين طرح از يك ساختار موجبري TEMبزرگ شده و معماري سيني گون به همراه مبدل هاي با شكاف باريك شونده متقاطر استفاده شده است. اين مبدل ها با روش گالركين در حوزه طيف طراحي شده اند. روشي گام به گام براي طراحي و شبيه سازي اين ساختارها ارائه شده و ساختار موجبري TEMبزرگ شونده و مبدل ها به كمك تئوري بازتاب كوچك به صورت بهينه و شبه بهينه طراحي شده اند. پس از طراحي و شبيه سازي ساختار، ساخت بردهاي مايكروويو و ساختار مكانيكي صورت گرفت. در پايان مقسم و تركيب كننده فضايي ساخته شده، مورد آزمايش قرار گرفت. پهناي باند 2-18GHzبا افت بازگشتي بهتر از 10dBو متوسط تلف عبوري بهتر از 2dBبه دست آمد كه با نتايج حاصل از شبيه سازي تطابق خوبي داشت .
مقدمه
فناوري مايكروويو و موج ميلـي متـري در زمينـه هـاي تجاري و نظامي داراي كاربردهاي بسيار زيادي است. تقويت كننده هاي بـا تـوان خروجـي بـالا و پهـن بانـد در محـدوده فركــانس هــاي مــايكروويو و مــوج ميلــي متــري يكــي از قسمت هاي بسـيار مهـم و ضـروري سيسـتم هـاي دفـاعي و مخابراتي است كه درسيستم هـاي مخـابراتي ر، رادا و جنـگ الكترونيك كاربرد دارد. هرچند كه قطعـات نيمـه هـادي در فركانس هاي مايكروويو، كوچك وكم وزن هستند و نيـاز بـه منبع تغذيه با ولتاژ كم دارند ولي سطح توان پهن باند قابـل دسترس از قطعات نيمه هادي محدود است و بـراي گـرفتن توان بـالا از آن هـا دچـار محـدوديت هسـتيم. لامـپ هـاي مايكروويو داراي توان خروجي بالا مـيباشـند در حـالي كـه مصرف ولتاژ و جريان آن ها بسيار بالا است، عمـر مفيدشـان پايين است، مستعد از كار افتادن ناشي از خرابي يك قسمت ميباشند و نسبت به قطعات حالت جامد نويزي تر مي باشند. با توجه به محدوديت هايي كه براي قطعـات حالـت جامـد و لامپ هاي خلأ مطرح است، لزوم استفاده از روش هـاي بهتـر براي رسيدن به توان بالا و پهن باند معلـوم مـيگـردد.
ABSTRACT
In this paper, the design and construction of a 16-band broadband spacecraft / spatial combiner has been carried out. In this design, a TEM waveguide structure has been enlarged, and the tray architecture has been used along with interchangeable slot converters. These converters are designed by the Galerkin method in the spectral domain. A step-by-step approach for designing and simulating these structures is presented and the TEM waveguide structure is enhanced, and the converters are designed optimally and quasi-optimally with the help of the small reflection theory. After designing and simulating the structure, the construction of microwave plates and mechanical structure was carried out. At the end of the plot and the spatial combiner was made, it was tested. A bandwidth of 2-18GHz with a recurrence drop of better than 10dB and a mean loss of better than 2dB was found, which was in good agreement with the simulation results.
INTRODUCTION
Microwave technology and microwave wave have a lot of applications in the commercial and military fields. High-bandwidth and broadband amplifiers in the microwave frequency range and microwave wave are one of the most important parts of the defense and telecommunication systems that are used in telecommunication systems, radio, and electronic warfare. However, semiconductor components in microwave frequencies are small and lightweight and require low voltage power supply, but the level of broadband availability is limited to semiconductor components and we have limited constraints for obtaining high power. Microwave lamps have high output power while their voltage and current consumption are high, their useful life is low, they are susceptible to failure due to failure of one part and are much more noise-free than solid components. Given the limitations of solid state components and vacuum tubes, the need to use better methods to reach high power and broadband is apparent.
Year: 2010
Publisher : Eighteenth International Energy Conference of Iran
By : Seyyed Esmaeil Hosseini Ramaghani, Ali Banaii
File Information: persian Language/ 6 Page / size: 635 KB
سال :1389
ناشر : هجدهمین کنفرانس بین المللی برق ایران
کاری از : سيد اسماعيل حسيني رمقاني ،علي بنايي
اطلاعات فایل : زبان فارسی / 6صفحه / حجم : KB 635
نقد و بررسیها
هنوز بررسیای ثبت نشده است.