توضیحات
چکیده
در اين مقاله طراحي يك كانورتر سه فاز 3سطحه 400هرتز با قابليت حذف هارمونيك هاي مشخص، ارائه گرديده است. در اين روش ميتوان هارمونيك هاي معين را با ايجاد يك زوج شكاف در ولتاژ خروجي اينورتر در هر پريود حذف نمود. اندازه شكاف و محل ايجاد شكاف با استفاده از روابط سري فوريه قابل محاسبه ميباشد. براي كنترل ولتاژ خروجي نيز از يك يك سوساز كنترل شده تريستوري براي لينك DCاستفاده شده است. يك نمونه 3سطحه 10كيلووات از اين كانورتر ساخته شده است كه نتايج حاصل از آن صحت عملكرد روش پيشنهادي را نشان ميدهد .
مقدمه
با توجه به نياز سيستم هاي موبايل نظامي به تحرك و قدرت جابجــايي ســريع، لازم اســت تجهيــزات ايــن سيســتم هــا در فركانس هاي بالاتر و ولتاژ كاري پايين تري كار كننـد. جهـت رفـع اين نياز، سيستم توليد توان سه فاز 200v – 400Hzبه صورت يك استاندارد جهاني براي سيستم هاي موبايـل نظـامي در آمـده است. راه هاي توليد توان 400Hzاستفاده از ژنراتورهاي 400Hzو كانورترهاي الكترونيك قدرت ميباشـد. كانورترهـاي الكترونيـك قدرت نسبت به ژنراتورها داراي قيمت كمتر، هزينه هاي تعميـر و نگهـداري كمتــر، قابليـت اطمينــان بـالاتر و رانــدمان بيشــتري ميباشند.با توجه به اين مسائل كانورترهاي الكترونيك قـدت بـه عنوان يك استاندارد براي توليد توان 400Hzپذيرفته شده است. تا كنون روشهاي مختلفي براي كنترل سوئيچينگ كانورترها ارائه گرديده است تا ولتـاژ خروجـي آن، تحـت بارهـاي مختلـف، ثابت مانده و شكل موج ولتاژ هر چه بيشتر بـه يـك شـكل مـوج سينوسي نزديكتر شود . روش هاي مدولاسيون پهناي پـالس (PWM) كـه بـر مبنـاي موج حامل كار ميكنند، مانند PWMسينوسي، امروزه بـه طـور گسترده اي در كانورترهاي توان پـايين و متوسـط مـورد اسـتفاده قرار ميگيرنـد. در ايـن روشـها بيشـترين مقـدار هارمونيك هـا در اطراف فركـانس مـوج حامـل پديـد مـيآيـد، لـذا بـراي كـاهش هارمونيك هاي مرتبه پايينتر بايد ميزان فركانس موج حامـل را بـه طور قابل ملاحظه اي (بيشتر از 10برابر فركانس اصـلي) افـزايش داد .
ABSTRACT
In this paper, a three-phase three-phase three-phase 400 Hz generator with the ability to remove the specified harmonics is presented. In this method, it is possible to eliminate certain harmonics by creating a gap pair at the output voltage of the inverter in each period. The size of the gap and the location of the gap is calculated using Fourier series relationships. To control the output voltage, a single Tristor controlled sensor for the DC link is also used. A 10-kilowatt three-level sample of this canon is made, the results of which show the accuracy of the proposed method.
INTRODUCTION
Due to the need for mobile military systems to move and move quickly, it is necessary that the equipment of these systems operate at higher frequencies and lower operating voltages. To meet this need, the three-phase power supply system of 200v-400Hz has become a global standard for military mobile systems. The 400Hz power generation paths utilize 400Hz generators and power electronics. Power electronic cogenerators are less costly than generators, lower maintenance costs, higher reliability and greater efficiency. With this in mind, e-camshafts are accepted as a standard for 400Hz power production. Various methods have been developed to control the switching of cannets so that its output voltage remains constant under various loads, and the waveform of the voltage becomes even closer to a sinusoidal waveform. Wave pulse width modulation (PWM) methods, which operate on carrier wave, such as sinusoidal PWM, are widely used today in low and medium power canons. In these methods, the highest amount of harmonics occurs around the carrier wave frequency, therefore, in order to reduce the lower harmonics, the carrier carrier frequency must be significantly increased (more than 10 times the original frequency).
Year: 2010
Publisher : Eighteenth International Energy Conference of Iran
By : Majid Abedi Marzoni, Abdollah Rabiei and Mehdi Daneshmand
File Information: Persian Language/ 6 Page / size: 670 KB
سال :1389
ناشر : هجدهمین کنفرانس بین المللی برق ایران
کاری از : مجيد ابدي مرزوني، عبداالله ربيعي و مهدي دانشمند
اطلاعات فایل : زبان فارسی / 6 صفحه / حجم : KB 670
نقد و بررسیها
هنوز بررسیای ثبت نشده است.