توضیحات
چکیده
در اين مقاله طرح قابهاي دوبعدي بتن مسلح با استفاده از تركيب روش جستجوي مستقيم و رگرسيون بهينه ، .است شده در اين روش ابتدا مجموعه مقاطع ممكن تير و ستون به طور مجزا تشكيل و بر اساس مقاومت عضو مرتب و شماره گذاري شده است. سپس ابتدا در يك جستجوي پيوسته بر اساس رگرسيون پارامترهاي مقاومتي اعضا، محل تقريبي مقطع بهينه در مجموعه مقاطع محاسبه و سپس با جستجوي مستقيم مقطع بهينه انتخاب ميگردد . در ادامه اثر نحوه گروه بندي اعضا جهت تعيين ميزان افزايش هزينه طرح بهينه با هر تيپ بندي نسبت به كم هزينه ترين طرح (بدون تيپ بندي )، مورد بررسي قرار گرفته است.
مقدمه
هر روند طراحي سازه شامل انتخاب يك سري مشخصات مصالح، مقاطع اعضا و هندسه سازه و سپس كنترل آنها جهت بررسي ارضاي ملزومات مقاومتي، بهره برداري، اجرايي و به طور كلي ضوابط آيين نامه اي است. در اغلب طراحي ها در صورت نقض هريك از ملزومات، طرح انتخابي تا برآوردن احتياجات آيين نامه اي اصلاح ميگردد و در غير اين صورت طرح مذكور به عنوان طرح نهايي معرفي ميگردد. در اينگونه موارد تقريباً همواره طرحي وجود خواهد داشت كه علاوه بر ارضاي ضوابط داراي مزيتهاي بيشتري از لحاظ وزن كلي سازه يا هزينه ساخت آن نيز باشد. به اين لحاظ از سه دهه گذشته مطالعاتي در زمينه بهينه سازي اعضا و سازه ها براي يافتن بهترين طرح با توجه به معيارهاي مختلف انجام گرفته است.ک در اينگونه مطالعات با تشكيل تابع هدف براي ارزيابي برازندگي طرح بر اساس معيارهاي چون وزن سازه، هزينه و غيره يا تركيبي از آنها، تعيين متغيرهاي طراحي و رعايت قيود طراحي با استفاده از الگوريتم هاي مختلف به جستجوي طرح بهينه پرداخته شده است. در مورد سازه هاي بتن مسلح به علت متشكل بودن از حداقل دو نوع مصالح بهترين معيار جهت بهينه سازي هزينه كلي سازه خواهد بود. در اين مقاله به بهينه سازي قابهاي مسطح بتن مسلح پرداخته شده است. روند كلي طراحي به اين گونه مي باشد كه ابتدا كليه مقاطع ممكن با رعايت قيود آئين نامهاي توليد و بر اساس افزايش ظرفيت نهايي مرتبه،گشت با استفاده از يك حل پيوسته محل تقريبي پاسخ تعيين و سپس با يك جستجوي مستقيم مقطع بهينه انتخاب ميگردد در اين مطالعه، مدلسازي و انجام محاسبات طراحي سازه بر اساس جديدترين ويرايش موجود نامه آيين بتن آمريكا (ACI 318M-08) صورت گرفته است. در ادامه اثر نحوه گروه بندي اعضاي سازه بر روي هزينه ساخت طرح مورد بررسي قرار گرفته است.
ABSTRACT
In this paper, the design of two-dimensional reinforced concrete frames using a combination of direct search method and optimal regression is studied. In this method, first, the possible sections of the beam and the column are arranged separately and numbered according to the member’s resistance. Then, in a continuous search, based on the regression of the resistance parameters of the members, the approximate area of the optimal section in the set of sections is calculated and then by direct search the optimal section is selected. In the following, the effect of how the grouping of the members was to determine the optimal cost increase with each type of typology compared to the least costly plan (without typing).
INTRODUCTION
Each structural design process involves selecting a series of material specification, member sections and structural geometry, and then controlling them to assess the satisfaction of the requirements of resistance, exploitation, executive and, generally, the rules of the regulations. In most designs, if any of the requirements are violated, the proposed design is corrected to meet the requirements of the rules and otherwise the design is introduced as the final design. In these cases, there will almost always be a plan that, in addition to satisfying the criteria, has more advantages in terms of the total weight of the structure or the cost of its construction. In this regard, from the past three decades, studies have been done on optimizing the members and structures to find the best design according to different criteria. In these studies, by establishing the objective function for evaluating the fitness of the design based on criteria such as the weight of the structure, the cost and Etc., or a combination of them, designing variables and design constraints have been considered by using different algorithms to find the optimal design. Concrete reinforced concrete structures will be the best criterion for optimizing the overall cost of structures due to the fact that two types of materials are classified. In this paper, the optimization of flat roofs of reinforced concrete has been investigated. The general design process is that first all possible sections, with respect to the constraints of the production names and based on the increase of the final capacity of the order, will be determined by using a continuous solution of the approximate location of the answer and then selected with an optimal direct search. In this Study, modeling and constructing design calculations based on the latest version of the existing American Concrete Order (ACI 318M-08). In the following, the effect of structuring members’ grouping on the cost of construction of the project has been studied.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Behrouz Ahmadi Nodoushan, Seyyed Iman Hatef
File Information: persian Language/ 8 Page / size: 931 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : بهروز احمدي ندوشن ، سيد ايمان هاتف
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 931
نقد و بررسیها
هنوز بررسیای ثبت نشده است.