توضیحات
چکیده
موج ضربه حاصل از انفجار یک شوک دینامیکی است که در ضخامتی چندین برابر مسیر آزاد میانگین برخورد انتشار می یابد، با عبور موج ضربه، دمای ناحیه پلاسمای پشت موج، به شدت بالا می رود. ناحیه میانی بین پلاسمای داغ و سوخت جامد بعد از جذب و قطع لیزر در پلاسمای داغ و آغاز موج انفجار پلاسما مورد بررسی قرار گرفته است، که در راس آن یک موج شوک درپلاسما ایجاد شده است. موج شوک پلاسما متفاوت از شوک دینامیکی گازی معمولی است که ساختار لایه ای چندگانه با پراکندگی بالا دارد. در این مقاله موج شوکی ایجاد شده توسط برخورد لیزر با سوخت جامد از نظر هیدرودینامیکی بررسی شده است. همپنین رفتار هیدرودینامیکی یک ماده با گرمای انتقال داده شده از لیزری قوی بررسی شده است. پروفایل چگالی و دمای منطقه اشتعال(منطقه میانی) مشخص شده است. همچنین مقایسه سرعت امواج ضربه ای با سرعت اشتعال انجام شده است و سرانجام با استفاده از نتایج عددی بدست آمده شرایط جوش و گداخت در سوخت جامد دوتریوم-تریتیوم توسط لیزر مشخص گردیده است.
مقدمه
زمانی که نور لیزر به سطح سرد یک ماده جامد برخورد می کند انرژی و شتاب آن از پرتو به ماده منتقل میشود و موجب گرم شدن ماده و حرکت آن می شود. اگر ماده در خلا قرار داشته باشد و لیزر به آن تابانده شود ضربه به ماده وارد شده و ماده حرکت خواهد کرد و همچنین اندکی امواج پراکنده ظاهر خواهد شد با این حال از آنجا که فشار بسیاربالا میرود امواج شاک در جهت تابش لیزر پخش می شود. اگر سوخت جامد به اندازه ای ضخیم و ثابت نگه داشته شده باشد به طوری که تابش لیزر باعث حرکت سوخت نشود پالس لیزر در یک ناحیه ای موسوم به ناحیه قطع جذب شده، بنابراین یک ناحیه پلاسمای داغ دمای بالا با چگالی بالاتر از چگالی حالت جامد و یک ناحیه بدون اختلال دمای پایین وجود خواهد داشت. در مرز بین این ناحیه ها یک ناپیوستگی در فشار و چگالی دو طرف بوجود خواهد آمد که این اختلاف ناگهانی فشار و چگالی دو طرف باعث انتشار موج ضربه ای به طرف سوخت جامد سرد می شود.
ABSTRACT
The shock wave is the result of an explosion of a dynamic shock that propagates in the thickness of several times the free path of the mean collision, increasing sharply by the passage of the shock wave, the temperature of the plasma region behind the wave. The intermediate region between hot plasma and solid fuel has been investigated after the laser has been absorbed and cut off in hot plasma and the onset of a plasma explosion wave, with a wave of shock in the head forming a plasma. The plasma shock wave differs from ordinary gas dynamic dynamics, which has a high dispersion layer structure. In this paper, the shock wave generated by the solid state laser collision is hydrodynamically investigated. Also, the hydrodynamic behavior of a material with high heat transfer from a laser has been investigated. The profile of the density and temperature of the flammable region (middle zone) is specified. Also, the comparison of the velocity of shock waves with the speed of ignition has been accomplished and finally, using numerical results, the welding and fusion conditions have been determined by laser in the solid state of deuterium tritium.
INTRODUCTION
When laser light hits a cool solid state, its energy and its acceleration pass from radiation to matter, causing the material to warm up and move it. If the substance is in a vacuum and the laser is applied to it, it will hit the material and the material will move, and somewhat dispersed waves will appear. However, since the pressure is too high, the waves of the shock wave propagate in the direction of the laser radiation. If solid fuel is held to be thick enough so that the laser beam does not move the laser pulse, it’s in an area called the discontinuous area, so a high temperature hot plasma region with a density higher than solid state density and There will be a low temperature disturbance area. At the boundary between these areas there will be a discontinuity in the pressure and density of the two sides that this sudden difference in pressure and density on both sides will cause a shock wave propagating toward solid solid fuel.
Year: 2016
Publisher : The first international congress on advanced and advanced research in science and technology
By : Fatemeh Besak, Mohammad Introduction to Ramilah, Babak Malekinia
File Information: Persian Language/ 6 Page / size: 465 KB
سال : 1394
ناشر : اولین کنگره بین المللی تحقیقات نوین و پیشرفته در علوم و فناوری
کاری از : فاطمه بساک ،محمد معرفی رمیله ،بابک مالکی نیا
اطلاعات فایل : زبان فارسی / 6 صفحه / حجم : KB 465
نقد و بررسیها
هنوز بررسیای ثبت نشده است.