توضیحات
چکیده
رله ديستانس اولين بار در آلمان در سال 1923در يك شبكه فشار قوي نصب گرديد.اين رله يك رله حفاظتي است كه زمان قطع آن تابع مقاومت طول سيم مي باشد.در اغلب اوقات بايد زمان قطع رله تابع محل اتصال كوتاه نسبت به رله باشد؛واز اين جهت بايدزمان قطع هررله ؛تابع جهت معيني از انرژي اتصال كوتاه نيز گردد.با توجه به اينكه هر چه محل اتصالي رله بيشتر باشد مقامت ظاهري قطعه سيم بين محل اتصالي تا رله بزرگتر ميگردد.از آنجا كه در رشد تاسيسات برقي رابطه مستقيمي بين مقاومت و طول سيم موجود است؛لذا با استفاده از رله ديستانس بعنوان رله حفاظتي در سراسر خطوط انتقال انرژي ؛عملا ومشكل حفاظت موضعي و سلكتيو وتنظيم جهش زماني رله هاي پي در پي نيز برطرف مي گردد. اگر يك شبكه حلقوي را با رله هاي ديستانس حفاظت كرده باشيم در آن اگراتصال كوتاهي رخ دهد تمام رله هاي ديستانس موجود كه جريان اتصال كوتاه از آن عبور مي كند تحريك ميشوند؛ولي فقط نزديكترين رله به محل اتصالي موفق به قطع سيم اتصال شده از شبكه مي شودزيرا قطعه سيم بين اين دو نقطه نزديكترين مقاومت را شامل است و بدين جهت زمان قطع اين رله نيز از همه كوتاهتر است.
ABSTRACT
The distances relay was first installed in Germany in 1923 on a high-pressure network. This relay is a protective relay whose interruption time is a function of wire length resistance. In most cases the relay’s interruption time must be a function of short-circuit relative to the relay; This direction should also be a function of the cut-off time of the relay for a certain direction of the short-circuit energy. As the relay junction location is greater, the apparent position of the wire segment between the junction location and the relay will be larger. And the length of the wire is available, so using the distance relay as a protection relay across the power lines is virtually impossible. Fazt local and long jump Relay successive selective adjustment is also eliminated. If a circular network is protected by remote relays, if a short circuit occurs, all existing relays passing through the short-circuit current will be stimulated, but only the nearest relay to the junction succeeds in disconnecting the connected wire from the network. This is because the wire segment between these two points is the closest resistor and therefore the shortest time to cut the relay.
Year: ۲۰۱۶
Source : 0
By : 0
File Information: persian Language/ 81 Page / size: 1.11 MB
سال : ۱۳۹۵
منبع : 0
کاری از : 0
اطلاعات فایل : زبان فارسی / 81 صفحه / حجم : MB 1.11
نقد و بررسیها
هنوز بررسیای ثبت نشده است.