توضیحات
چکیده
عمده ترين مسئله در زمينه تحليل شيرواني ها، تعيين ميزان پايداري با استفاده از پارامتر ضريب اطمينان در مقابل گسيختگي و تعيين تغييرشكلهاي ايجاد شده ميباشد. در گذشته بمنظور ساده سازي، اكثر بررسي هاي مربوطه تحت بار استاتيكي و بصورت دو بعدي انجام شده اند و روش شبه استاتيكي با وجود معايب زياد، بعنوان روشي متداول براي پايداري لرزه اي شيرواني ها شناخته شده است. بنابراين ، در اين تحقيق بمنظور بررسي صحيح و همه جانبه مسئله، توده لغزش بصورت 3بعدي مدلسازي ميشود و روشي دقيق براي تعيين ضريب ايمني شيرواني ها تحت بار واقعي ديناميكي ارائه ميشود كه قابليت در نظر گرفتن تغييرمكانهاي دائم را نيز دارد و قابل تعميم براي شرايطي پيچيده و مدل رفتاري متفاوت(شرايط هندسي پيچيده، وجود فشار آب منفذي و….) ميباشد. روش پيشنهادي متشكل از 3بخش است، ابتدا تنشهاي حاصل از روش عددي تفاضل محدود با استفاده از نرم افزار FLACمبناي محاسبات دو برنامه نوشته شده قرار داده ميشوند. در برنامه اول مختصات حاصل از تقاطع سطوح لغزش فرضي، با شيرواني مورد نظر محاسبه ميشود. و برنامه دوم با استفاده از دو بخش قبلي، تنشهاي برشي و نرمال بر سطوح مايل 3بعدي و تغييرات ضريب اطمينان مينيمم در بازه هاي 0/2ثانيه را محاسبه ميكند. لازم بذكر است در آناليز ديناميكي انجام شده با در نظر گرفتن تاريخچه دقيق بارگذاري، مرزهاي غير انعكاسي، مدل رفتاري الاستوپلاستيك به همراه تغييرشكلهاي بزرگ غيرخطي و…شرايط طبيعي يك شيرواني خاكي تحت بار لرزه اي ايجاد شده است.
مقدمه
تحليل پايداري شيرواني ها به منظور تعيين محتملترين فرآيند گسيختگي يا به عبارتي كمترين ضريب اطمينان، يكي از مسائل مهم مهندسي ژئوتكنيك ميباشد. اهميت اين موضوع وقتي بيشتر آشكار ميگردد كه لغزش يك شيرواني باعث خسارات عظيم و جبران ناپذيري گردد. بعضاً لغزش يك شيرواني خاكي در معادن و يا سدها خسارات جاني و مالي فراواني را موجب گشته است. در اكثر تحليلهاي طراحي، به دليل بزرگتر بودن ضريب اطمينان حالت سه بعدي از دو بعدي، شيرواني ها بصورت دو بعدي فرض ميشوند. اين درحاليست كه در مدلهاي دوبعدي براي ساده سازي بسياري از آيتم ها در نظر گفته نميشود و روند آناليز همه جانبه و كلي نميباشد. ز معمولترين متد مورد استفاده در ارزيابي پايداري شيب روشهاي عددي ( اجزا محدود و تفاضل محدود) و تعادل حدي ميباشند. روشهاي تعادل حدي، از جمله بيشاپ ،(1955)جانبو ،(1957) مورگسترن و پرايس (1965) و اسپنسر(1967) و …اگرچه آسان هستند ولي تغيير شكلهاي دائم، سرعت و روابط تنش كرنش را درنظر نميگيرند. روشهاي عددي از جمله اجزا محدود و تفاضل محدود با روش كاهش مقاومت مراحل تغييرشكل را مدل ميكنند و ضريب اطمينان و حدود سطح گسيختگي را فقط در حالت استاتيكي محاسبه مينمايند، كه اولين بار اين موضوع توسط زينكويچ (1955) انجام شده است.
ABSTRACT
The main problem in the analysis of slopes is to determine the stability level using the coefficient of reliability versus fracture parameter and to determine the changes in the shape. In the past, in order to simplify, most of the relevant investigations have been carried out under static load and in two-dimensional fashion, and the quasi-static method is known despite its many disadvantages as a common method for the seismic stability of the slopes. Therefore, in this research, in order to study the integrity of the problem, the slip mass is modeled as 3-dimensional and a precise method for determining the coefficient of the fluxes under real dynamic load is presented, which also has the ability to consider permanent displacements and can be generalized for complex conditions. And a different behavioral model (sophisticated geometric conditions, the presence of pore water pressure, etc.). The proposed method consists of 3 parts. First, the tensions generated by the finite difference numerical method using the FLAC software are based on the calculation of the two written programs. In the first program, the coordinates of the intersection of the hypothetical slip surfaces are calculated with the desired slope. And the second program calculates the shear and normal stresses on the 3-D slope levels using the two previous sections and changes the minimum coefficient of confidence in the intervals of 0.2 seconds. It should be noted that in dynamic analysis, taking into account the exact loading history, the non-reflecting boundaries, the elastoplastic behavioral model along with the large nonlinear forms of change and … the natural conditions of an earth’s slope under the seismic load have been created.
INTRODUCTION
The analysis of the stability of the slopes is one of the important issues of geotechnical engineering in order to determine the most probable failure process or, in other words, the lowest reliability coefficient. The significance of this issue becomes apparent when the slip of a slope causes huge and irreparable damage. Occasionally, slipping a slope in mines or dams has caused a lot of financial and financial losses. In most design analyzes, the spatial resolution is assumed to be two-dimensional because of the greater reliability of the three-dimensional state of the two-dimensional state. This is not the case in two-dimensional models for simplicity of many items, and the process of analysis is not comprehensive and general. The most common method used to evaluate the slope stability of numerical methods (finite element and finite difference) and finite equilibrium. Equilibrium methods, including Bishop, (1955) Jonbo, (1957) Morgastran and Prase (1965) and Spencer (1967) and … although easy, do not take into account permanent strains, velocities, and strain stress relations. Numerical methods, including finite element and finite difference, are modeled by the method of reducing the strength of the deformation stages, and calculate the coefficient of certainty and the extent of the fracture surface only in a static state, which was first performed by Zinkevich (1955).
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Saleh Jamshidi Jam, Mohammad Mohsen Tofigh
File Information: persian Language/ 8 Page / size: 428 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : صالحه جمشيدي جم ، محمد محسن توفيق
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 428
نقد و بررسیها
هنوز بررسیای ثبت نشده است.