توضیحات
چکیده
در تحقيق حاضر جينتا مطالعات وپژوهشهاي انجام شده بر يا توليد پودر ماده پيشرفته يا با عنوان Ba0.5Sr0.5Co0.8Fe0.2O3-δآورده شده است که در پيل هاي سوختي اکسيد جامد به عنوان بهترین ترکيب راي توليد الکتروليت سرام کي ي مورد توجه مي باشد. تحقيقات انجام گرفته بر قطعات توليد شده از يا ن ترکيب نشان مي دهد که نوع فرآيند توليد پودر بر روي نفوذ پذیری اکسيژن مربوط به الکتروليت تاثیر بسزايي دارد. فرایندسنتز در دما 1373Kبه مدت 5ساعت بر خشته حاصل از پودر توليد شده توسط فرایند سنتزحالت جامد (SS )بیان مي کند که این روش سبب بهبودکارايي الکتروليت و نفوذپذیری اکسيژن میگردد.
مقدمه
باتوجه به کمبود منابع فسيلي لازم براي توليد انرژي کافي و افزايش روز افزون انرژي در پیشبرد تکنولوژي، استفاده از انرژي هاي نو در سال هاي اخیر بسيار مورد توجه قرار گرفته است. یکی از منابع جديد شناخته شده برای تولید انرژي پیلهاي سوختي هستند که جايگزین مناسبي براي پیلهاي شیمیایی به عنوان تولید کننده انرژي الکتریکی در زمینه هاي مختلف از جمله صنعت، مصارف خانگي ادارات و … باشند. از اوایل دهه 60کاربرد پيل هاي سوختي به دليل ناقص بودن سوخت هاي موجود مورد استفاده قرار گرفت. هدف از استفاده پيل هاي سوختي، تولي يد ک منبع انرژي مستقل از سوخت هاي يلي فس با و کارايي بالاي توليد انرژي، صرفه اقتصادي، آلودگي زیست محیطي کمترو حجم اشغالي پایینتر است. پیل سوختي سیستمي الکتروشیمیایی است که مستقيما انرژي شیمیایی سوخت را به انرژي الکتریکي تبدیل میکند. سیستم پیل سوختي هیدروژن يا متانول را به عنوان سوخت و اکسيژن يا هوا را به عنوان اکسيدان مورد استفاده قرار مي دهد. هر سلول سوختي از لايه هاي ساندویچي متفاوتي تشکيل شده است که لايه میانی الکتروليت است و دو طرف دو الکترود از جنس مواد متخلخل، قابل نفوذ و رساناي الکتریکی( مانند کربن متخلخل) قرار ميگیرد.
ABSTRACT
In the present study, Jinetta studies and researches on the production of advanced powdered material, or Ba0.5Sr0.5Co0.8Fe0.2O3-δ, have been presented, which are considered in the solid oxide fuel cell as the best combination of ceramic electrolyte production. Be Research on the components produced from these compounds shows that the type of powder production process has an important influence on the electrolyte penetration of oxygen. The temperature at 1373 K for a temperature of 5 hours on powdered soda produced by the solid state synthesis process (SS) states that this method improves the efficiency of the electrolyte and the oxygen permeability.
INTRODUCTION
Due to the lack of sufficient fossil fuel resources to generate enough energy and increasing energy in advancing technology, the use of new energy in recent years has been very much considered. One of the new sources known for fuel cell energy production is the replacement of chemical cells as electric power generators in various fields, including industry, home use of offices, and more. Since the early 60’s, the use of fuel cells has been used because of the incompleteness of existing fuels. The purpose of using fuel cells is to generate energy sources independent of fossil fuel fuels and high efficiency of energy production, economical, low environmental pollution and lower occupancy. The fuel cell is an electrochemical system that directly converts the chemical energy of the fuel into electrical energy. The fuel cell system uses hydrogen or methanol as fuel and oxygen or air as oxidants. Each fuel cell consists of different sandwich layers, the middle layer of the electrolyte, and the two sides of the two electrodes are made of porous, penetrating and conductive materials (such as porous carbon).
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Sedigheh Sheikh, Hassan Sheikh, Hadi Mashhadi Health
File Information: persian Language/ 11 Page / size: 768 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : صدیقه شیخ ،حسن شیخ ،هادي سلامتي مشهدي
اطلاعات فایل : زبان فارسی / 11 صفحه / حجم : KB 768
نقد و بررسیها
هنوز بررسیای ثبت نشده است.