توضیحات
چکیده
چدن هاي پرسيليسيم مقاوم به خوردگي با 15درصد سيليسيم از ارزان ترين آلياژهاي مقاوم به خوردگي در محيط هاي اسيدي ميباشند ولي ريخته گري اين چدن ها بسيار مشكل است و ضـايعات زيـاد در رونـد توليـد باعث افزايش قيمت آنها مي شود.اين تحقيق جهت بهبود بخشـيدن بـه سـاختار و خـواص مكـانيكي آليـاژ مذكور انجام شد. هشت ذوب چدن با تركيب پايه يكسان /5با %14سيليسيم و افزودن عناصر آليـاژي Ca ,Ti ,Ni ,Nb ,Mo ,Mg ,Cuو Crدر قالب هاي ستاره اي با ضخامت مقـاطع مختلـف ريختـه گـري شـدند. نتايج نشان داد نمونـه حـاوي 1/3درصـد مـس داراي سـاختار تقريبـا يكنـواختي در ضـخامت هاي 5،10و30 ميليمتر است و حضور مس باعث مي شود در همه ضـخامت ها گرافيت هـاي ورقـه اي نـوع Aتشـكيل شـوند. تنش شكست براي اين نمونه 172مگا پاسكال اندازه گيري شد كه نسبت به بقيه ذوب ها بجـز ذوب حـاوي كرم-موليبدن بالاتر بود.
مقدمه
چــدن هاي پرسيليســيم مقــاوم بــه خــوردگي بــا 15درصــد سيليســيم از ارزان تــرين آلياژهــاي مقــاوم بــه خــوردگي در محيط هــاي اســيدي ميباشــند ولــي ريختــه گــري ايــن چــدن ها بســيار مشــكل اســت و ضايعات زيـاد در رونـد توليـد باعـث افـزايش قيمـت آنهـا مـي شود. ايـن چـدن ها در سـال 1908مـيلادي ابــداع شــده و تــاكنون كاربردهــاي وســيعي يافتــه انــد . ايــن آليــاژ مقاومــت بــه خــوردگي خــوبي در برابـر اسـيدها بـه اسـتثناي اسـيد فلئوريـك دارد.مقاومـت بـه خـوردگي در ايـن آليـاژ بـه علـت ايجـاد يك لايه مقاوم پاسيو روي سطح فلز ايجاد مي شود. با توجـه بـه مقـدار سيليسـيم موجـود در تركيـب همان گونـه كـه انتظـار مـي رود ريـز سـاختار ايـن چـدن ها شامل زمينـه سـيليكو فريـت(فريـت بـا مقـدار زيـادي سيليسـيم حـل شـده) و گرافيـت هـاي ورقـه اي مـي باشــد. ايجــاد محلــول جامــد آهــن و سيليســيم در زمينــه باعــث ايجــاد ســختي حــدود 500برينــل مــي شـود، ايــن افـزايش سـختي باعــث كـاهش شــديد انعطــاف پـذيري و تـردي ايــن آليـاژ خواهــد شــد. از جملــه كاربردهــاي ايــن چــدن هــا ســاخت قطعــات مــورد اســتفاده در صــنايع توليــد اســيد هــا و مــواد شــيميايي، توليــد كــود هــاي شــيميايي ،مــواد منفجره،فاضــلاب هــا ، تصــفيه آب، اســيد شــويي فلــزات، آند هاي حفاطت كاتدي،صنايع كاغذ و…است.
ABSTRACT
Corrosion-resistant corrugated copper castings with 15% silicon are the cheapest corrosion-resistant alloys in acidic environments, but the casting of these castings is very difficult and high losses in the process of production increase their prices. This research aims to improve the structure The mechanical properties of the alloy were performed. Eight smelt castings were cast with the same base composition / 5 with 14% silicon and the alloying elements Ca, Ti, Ni, Nb, Mo, Mg, Cu and Cr were cast in star molds of different thicknesses. The results showed that the sample containing 1.3% copper had a nearly uniform structure in the thicknesses of 5, 10 and 30 mm, and the presence of copper makes all types of sheets of A graphite formed. The fracture stress for this sample was measured at 172 MPa, which was higher than the rest of the melting except melting containing worm-molybdenum.
INTRODUCTION
Corrosive corrosion resistant pearlitic castings with 15% silicon are the cheapest corrosion-resistant alloys in acidic environments, but the casting of these castings is very difficult and high losses in the process of production increase their prices. These castings were invented in 1908 and have so far been used extensively. This alloy is resistant to corrosion against acids other than fluorine. Corrosion resistance in this alloy results from the creation of a passive resilient layer on the metal surface. Regarding the amount of silicon present in the composition, as expected, the fine structure of these castings includes the silica ferrite (ferrite with a high amount of silicon dissolved) and sheet graphite. Creating a solid solution of iron and silicon in the field causes a hardness of about 500 beryllium, this hardness increase will greatly reduce the flexibility and shearity of this alloy. One of the applications of these castings is the manufacture of components used in the production of acids and chemicals, production of chemical fertilizers, explosives, sewage, water purification, acid washing of metals, cathode deposit anodes, paper industries, and so on.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Kamran Shirani, Behzad Niroumand, Ali Shafiee
File Information: persian Language/ 10 Page / size: 329 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : كامران شيراني ، بهزاد نيرومند ، علي شفيعي
اطلاعات فایل : زبان فارسی / 10 صفحه / حجم : KB 329
نقد و بررسیها
هنوز بررسیای ثبت نشده است.