توضیحات
چکیده
پلي كريستال زيركونياي پايدار شده با يوتريا داراي ساختار تتراگونال است. اين فاز تا دماي محـيط پايـدار مي ماند. با تأمين نيروي محركه گرمايي يا نشي اين فاز قادر به استحاله دادن است و بـه فـاز مونوكلينيـك تبديل مي شود. كوينچ نمونه مي تواند باعث استحاله مارتنزيتي شود. در تحقيق حاضر اثر زمان آنيل را بـر نمونه هاي تحت عمليات حرارتي قرار گرفته در 900درجه سانتيگراد و زمان هـاي مختلـف بررسـي شـده است. همچنين اثر اتمسفر خنثي كوره بر انجام اسـتحاله تحليـل شـده اسـت. نتـايج حاصـل از ايـن تحقيـق بيانگر تأثير زمان بر ميزان استحاله فازي است. بـا افـزايش زمـان آنيـل فـاز مونوكلينيـك بيشـتري تشـكيل ميشود كه در نتيجه با درشت تر شدن فاز استحاله يافته سختي كاهش مي يابد.
مقدمه
پوشش هاي حاوي اكسي يد ز ركونيوم سال هاست كه در صنعت با نام پوشش های حایل حرارتـي كـاربرد دارد. از خصوصيات اين پوشش ها ضريب انتقال حرارت پـایین, ضـریب انبسـاط حرارتـي مشـابه زيرلایه فلزي يوپا داري فازي بالاست . زيركونياي خالص داراي سه شبكه كريسـتالي متفـاوت اسـت. در دمـاي محيط ساختار آن مونوكلينيك است. اين فاز در دمـاي 1170درجـه سـانتيگراد بـه فـاز تتراگونـال تبـديل ميشود. فاز تتراگونال در دماي 2370درجه سانتيگراد بـه فـاز مكعبـي اسـتحاله مـي دهـد و در نهايـت در دماي 2680درجه سانتيگراد ذوب مي شود .استحاله فاز تتراگونال به مونوكلينيك با افزايش حجم 3تـا 5درصدي همراه است .اين مسئله باعث شكست قطعات سراميكي و پوشـش مـي شـود. اضـافه كـردن افزودني هاي مختلف باعث پايداري فاز تتراگونال و مكعبي در ساختار سينتر شده خواهد شد. زيركونيـاي پايدار شـده بـا يوتريـا داراي اسـتحكام بـالايي اسـت و تقريبـاً تمـام زيركونيـادر فـاز تتراگونـال اسـت . زيركونياي پايدار شده تا دماهاي پايين فاز تتراگونال خود را حفظ مي كند. به دليل شـبكه پلـي كريسـتال, انجام استحاله تتراگونال به مونوكلينيك كه به موجـب آن افـزايش حجـم صـورت مـي گيـرد؛ بـه نيـروي محركه بيشتري نياز دارد. افزايش حجم دانه در حال استحاله به دانه هاي اطراف تنشي وارد ميكند كـه در عكس العمل دانه هاي مجاور با كرنش اعمالي مخالفت مي كنند و انجام استحاله را ملزم بـه تـأمين نيـروي محركه بيشتر مي كند.
ABSTRACT
The tetragonal structure is stable with zirconium polycrystalline silicon. This phase remains stable until the ambient temperature is reached. By providing a heat-inducing force or niche, this phase can be transformed into a monoclinic phase. Quinch sample can cause martensitic degeneration. In the present study, the effect of annealing time on heat-treated specimens was investigated at 900 ° C and different times. Also, the effect of neutral furnace atmosphere on the effect of transformation has been analyzed. The results of this study indicate the effect of time on the amount of fuzzy transformation. As the aniline phase increases, monoclonal phase is formed which, as a result, decreases with hardening of the transformed phase.
INTRODUCTION
X-ray coatings with Rekvium have been used in the industry for many years as heat-sealing coatings. From the characteristics of these coatings, the heat transfer coefficient is low, the thermal expansion coefficient is similar to that of the fuselage uvulation metal substrate. Net zirconia has three different crystal networks. At its ambient temperature, its structure is monoclinic. This phase is transformed into a tetragonal phase at 1170 ° C. The tetragonal phase degenerates into a cubic phase at 2370 ° C and finally melts at 2680 ° C. The tetragonal phase transformation into monoclinic is accompanied by an increase of 3 to 5% volume. This results in failure of the ceramic and coating parts. Adding different additives will result in the tetragonal and cubic phase stability in the synthesized structure. The zirconia of the pyrite has a high strength, and almost all of the zirconium is tetragonal. Stabilized zirconia preserves its low tetragonal temperatures. Due to the polycrystalline network, tetragonal transformation to monoclonics, which results in increased volume, requires more propulsion. The increase in the volume of grain under dehumidification enters the tiny grain around which the opposing grains contradict the applied strain, and it is necessary to carry out the deformation to provide more propulsion.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Abdollah Lalalpour, Soroush Shahabi, Ali Ashrafi, Mohammad Ali Golzar
File Information: persian Language/ 9 Page / size: 2,59 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : عبداالله لعل پور , سروش شهابي , علي اشرفي , محمد علي گلعذار
اطلاعات فایل : زبان فارسی / 9 صفحه / حجم : KB 2,59
نقد و بررسیها
هنوز بررسیای ثبت نشده است.