توضیحات
خلاصه
در اين پژوهش، طرح اختلاط بتن خودتراكم با استفاده از روش تاگوچي براي مقاومت فشاري بهينه شد. روند كار بدين صورت بود كه ابتدا با استفاده از يكي از روش هاي مرسوم جهت تعيين طرح اختلاط بتن خودتراكم، سه طرح اختلاط و مقاومت فشاري 7روزه آنها به دست آمد و با استفاده از اين طرحها و روش تاگوچي، طرح اختلاط بهينه تهيه شد. بررسي نتايج به دست آمده نشان ميدهد كه روش تاگوچي براي بهينه كردن طرح اختلاط بتن خودتراكم يك روش مناسب ميباشد چرا كه مقاومت فشاري 7روزه طرح به دست آمده با اين روش، بيش از مقاومت فشاري 7روزه طرح اختلاط- هايي است كه با استفاده از روش هاي مرسوم به دست آمدند.
مقدمه
در سازه هاي بتني براي رسيدن به مقاومت مورد نياز و كاهش تخلخل و هواي درون بتن و حصول پايايي، بتن به روشهاي مختلف متراكم ميشود. با توسعه روزافزون كارهاي بتني و كمبود نسبي كارگران ماهر و يا سهل انگاري هاي آنها در كارگاهها و يا به دليل مزاحمت هاي جسمي و روحي و يا هزينه متراكم كردن بتن در هنگام ريختن بتن در قالب، به ويژه در مواقعي كه انبوه ي از ميلگرد وجود دارد، عمل تراكم به طور كامل و صحيح انجام نگرفته و در نهايت مشخصات مكانيكي مطلوب بتن حاصل نميگردد. لذا ساخت بتني بدون نياز به متراكم كردن همواره راه حلي براي اين معضل به نظر ميرسيد و از اين رو ساختن چنين بتني رويايي براي تكنولوژيست هاي بتن بوده است كه بتوانند با استفاده از مواد افزودني شيميايي مختلف و تغيير در مقادير مصالح طرح اختلاط،به اين مهم دست يابند و بتن را از نقص اجرايي لرزاندن و متراكم كردن رها سازند. ابداع بتن خودتراكم نتيجه اين تلاشها بوده است. ميتوان گفت امروزه استفاده از بتن خود تراكم نه تنها خيال مجريان پروژه هاي بزرگ را از عدم كارآيي و يا ضعف اجرايي كارگران آسوده ميسازد بلكه موجب صرفه جويي- هاي چشمگيري در مدت زمان اجرا و به تبع آن در هزينه ها ميگردد. بتن خود تراكم نخست در سال 1986توسط اچ.اكامورا در ژاپن پيشنهاد گرديد و در سال 1988اين نوع بتن در كارگاه ساخته شد و نتايج قابل قبولي را از نظر خواص فيزيكي و مكانيكي بتن ارائه داد. اولين كارگاه آموزشي معتبر كه به بررسي مصالح مورد استفاده در بتن خودتراكم اختصاص داشت در اوت 1988در دانشگاه تكنولوژي كوچي 2در كشور ژاپن برگزار گرديد ومقالات متعددي در ارتباط با توسعه بتن خودتراكم در دنيا ارائه شد.
ABSTRACT
In this study, the self-compacting mixing scheme was optimized using the Taguchi method for compressive strength. The process of this work was firstly obtained by using one of the conventional methods for determining the mixing design of self-compacting concrete, three mixing designs and 7-day compressive strength. Using these designs and Taguchi method, an optimal mixing plan was prepared. The results of this study show that the Taguchi method is suitable for optimization of self-assembly concrete mixing plan, because the 7-day compressive strength of the design obtained by this method is more than 7-day compressive strength of the mixing plan. Using the methods Were customary.
INTRODUCTION
In concrete structures to achieve the required resistance and reduce the porosity and air inside the concrete and achieve reliability, the concrete is compressed in different ways. With the increasing development of concrete works and the relative shortage of skilled workers or their negligence in workshops or because of physical and mental harassment, or the cost of concrete condensation when pouring concrete in the form, especially when there are a lot of scum Density is not completely and accurately applied, and in the end, the mechanical properties of the concrete are not obtained. Therefore, the construction of concrete without the need for condensation always seemed to be a solution to this problem, and thus the construction of such a dream concrete for the technology technologists of concrete, which can be used by various chemical additives and changes in the amounts of aggregate mixing materials, this It’s important to get rid of concrete from the imperfection of vibrating and compacting. The invention of self-compacting concrete has been the result of these efforts. It can be said today that the use of self-compacting concrete not only facilitates the imagination of large project executives from the inefficiencies or weaknesses of the workers, but also saves considerable time in the run-time and consequently in costs. The first self-compacting concrete was offered in Japan in 1986 by Hakamura, and in 1988, this type of concrete was constructed in the workshop and provided acceptable results for the physical and mechanical properties of concrete. The first prestigious workshop dedicated to the study of materials used in Concrete Self-Detachment was held in August 1988 at Japan’s Kuchji Technology University in Japan and several papers on the development of self-propelled concrete in the world were presented.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Mohammad Esmaeil Nia Omran , Mohsen Nourian Bahmand
File Information: English Language/ 8 Page / size: 343 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : محمد اسماعيل نيا عمران ، محسن نوريان بهمند
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 343
نقد و بررسیها
هنوز بررسیای ثبت نشده است.