توضیحات
چکیده
لازمه طراحي سيستم هاي مخابراتي فراپهن باند، دسترسي به مدل دقيقي از انتشار سيگنال در كانـال اسـت. در در در ايـن مقالـه انتـشار سـيگنال در داخـل ساختمان و در حالت و در حالت و در حالت LOSبررسي شده و بررسي شده و مدل مدل مناسب اين سناريو ارايه خواهد شد . همچنين پارامترهاي باند پهن يعني پروفايـل پروفايـل تــوان تـأخير، تــوان تـأخير، تـأخير اضـافي تـأخير اضـافي ، ميانگين ، گستره تأخير مؤثر و ” “NP10dBتحليل و شبيه سازي و بر اساس اين بررسي ها مدلي پيشنهاد و ارايه ميشـود اد و ارايه مي اد و ارايه مي شـود . مـدل پيـشنهادي بـر اسـاس مدل دودسته اي است با اين تفاوت كه در مدل پيشنهادي متوسط پروفايل توان تأخير با تابع تواني توصيف و همچنين زمان ورود پرتوها با توزيع نمايي اصلاح شـده مدل مي شود . سرانجام كانال را بر اساس مدل پيشنهادي، S-Vو دودسته اي و دودسته اي تحقق مي دهيم تحقق مي دهيم . نتـايـج انـدازه گيـري نشان ميد نتـايـج انـدازه گيـري نشان ميدهد كه در مدل پيشنهادي خطاي نسبي متـوسط متـوسط متـوسط پـارامتر پـارامتر هاي تأخير اضافي ميانگين و گستره تأخير مؤثر و ” “NP10dBدر قياس با مدل دودسته اي 2به ترتيب به ترتيب 4/2درصـد ، 0/45درصـد 14/11 درصـد در مقايسه با مدل 5 S-Vبه ترتيب 9/5درصد ، 6/96درصد ،و 14/38 درصد 1414/14 درصد كاهش مي يابد و اين به معني توصيف بهتر كانال است.
مقدمه
كميــسيون فــدرال مخــابرات پهنـــاي بانــد 3/1GHz تا 10/6GHz را بــه سيــستم هاي فــرا پهــن بانــد اختــصاص داده است. این سیستمها در سالهاي اخير به دليل مزيت هاي فراواني كه نسبت به سيستم هاي باند باريك دارند، مـورد توجـه خاصـي قرار گرفته اند.سیگنال RFاين سيستم ها متشكل از يـك سـري پالس فوق كوتاه با چگالي طيفي توان پايين است. توان ارسالي كم ( dBm- 41/3) باعث مي شود تا سيستم هاي فرا پهن باند بتواننـد از پهناي باند ساير سرويس ـهاي موجود مثل GPSو IEEE802.11x و WLNAبدون ايجاد تداخل، استفاده كنند. كانال انتقال محيط انتشاري است كه سيگنال از فرستنده تا گيرنده از آن ميگذرد. ازآنجايي كه محيط انتشار سيـستم هـاي فراپهن باند معمولا محـيط داخـل سـاختمان و شـلوغ اسـت، در نتيجه سيگنال ارسالي در اين كانال مانند ساير كانالهاي بيسيم از مسيرهاي مختلفي به گيرنده ميرسد، بنابراين سيگنال دريـافتي تركيبي از مولفه هـاي چنـد مـسيري اسـت كـه شـكل تخريـب شده اي نسبت به سـيگنال ارسـالي دارد.
ABSTRACT
The need for the development of ultra-wideband telecommunication systems is the availability of a precise model of signal propagation in the channel. In this paper, the propagation of the signal inside the building, in the state and in the state and in the LOS state, is examined and the model of the model will be presented in this scenario. Also, broadband parameters such as delay profile, latency, delay delay, extra delay, mean, effective latency, and NP10dB profiles are analyzed and simulated. Based on these studies, a model is proposed and presented and presented and presented. . The proposed model is based on the two-dimensional model, with the difference that in the proposed model, the average power profile of the delay is described with the power function and also the time of arrival of the beams with the modified exponential distribution. Finally, we realize the channel based on the proposed S-V, Dual and Single-Dedicated model. Measurement results indicate that the results of the measurements show that in the proposed model, the relative error of the mean averaged average parameter of the additional latency of the mean and the effective delay range and NP10dB in comparison with the two-dimensional model 2 were 2.4%, 45.0%, 14 / 11% in comparison with the S-V model is 5.9%, 96.6%, and 14.48%, 14.14%, respectively, which means a better description of the canal.
INTRODUCTION
The Federal Communications Commission has allocated broadband bandwidth of 3.2 GHz up to 10.6 GHz to ultra-wideband systems. These systems have received particular attention in recent years due to their many advantages over narrowband systems. RF signals These systems consist of a ultra short pulse series with low power spectral density. Low transmit power (dBm-41/3) can make ultra-wideband systems
Use the bandwidth of other existing services, such as GPS, IEEE802.11x and WLNA, without interfering. The transmission channel is the transmission medium where the signal passes from transmitter to receiver. Since the propagation environment of the ultra-wideband systems is usually indoor and busy, the signal transmitted to the channel, like other wireless channels, reaches the receiver in different ways, so the received signal is a combination of multi-path components that have a distorted shape of the ratio It sends a signal.
Year: 2010
Publisher : Eighteenth International Energy Conference of Iran
By : Vahid Tabataboukili, Shahryar Shirvani Moghaddam, Mostafa Yahyabadi, Dariush Abbasi Moghadam
File Information: persian Language/ 6 Page / size: 503 KB
سال :1389
ناشر : هجدهمین کنفرانس بین المللی برق ایران
کاری از : وحيد طباطباوکیلی ،شهريارشيرواني مقدم ,مصطفي يحيي آبادي ، داریوش عباسی مقدم
اطلاعات فایل : زبان فارسی / 6 صفحه / حجم : KB 503
نقد و بررسیها
هنوز بررسیای ثبت نشده است.