توضیحات
چکیده
در این پژوهش چگونگي انحلال روي در آلومينيوم با ریز شدن اندازه دانه ها مورد مطالعه قرار میگیرد. براي اين منظور پودر آلومينيوم و روي در سه درصد ، 6و 14 10درصد روي در يـك آسـياب گلولـه اي سیاره اي، آسياب كاري شدند. به منظور بررسي هاي ساختاري و چگونگي انجام انحلال روي در سـاختار از بررسی های آنالیز اشعه ايكس میكروسكوپ نوري استفاده شد. نتایج حاكي از آن است كه بـا انجـام آسیاب كاري مخلوط پودر آلومينيوم و اكسيد روي در ابتدا روي در ساختار به صـورت فـوق اشـباع حـل میشود. پس از آن با ادامه فرآيند آسياب كاري و كاهش اندازه دانه ها به تدريج روي از سـاختار خـارج شده و در مرز دانه ها متمركز مي شود. این عامل سبب مي شود سختي آلياژ نيز كاهش يابد.
مقدمه
يكي از توانايي هاي فرآيند آلياژ سازي مكانيكي، افزايش مقدار انحلال پـذيري دو عنصـر آليـاژي در هـم ميباشد. در حقيقت با انجام آلياژسازي مكانيكي دو عنصر كه قابليت حل شدن آنها در شـرايط محيطـي و عادي كم ميباشد، ميتوان درصد بالاتري از عنصـر حـل شـونده را در زمينـه حـل نمـود. در حـين انجـام آلياژسازي مكانيكي دو پودر، به عنوان مثال دو پودر فلز داكتيل، با تشكيل ساختار لايه اي، فصل مشتركبين دو عنصر افزايش مييابد. با كم شدن فواصل بين لايه هاي تشكيل شده در ادامه فرآيند آسياب كـاري،اين فصل مشترك ها بيشتر و بيشتر ميگردند. افزايش فصل مشترك هاي فازي از يـك سـو باعـث افـزايش انرژي سيستم از طريق انرژي آزاد فصل مشترك ميگردد و از طرف ديگر باعث ميشود، فواصل نفـوذي كاهش يابند. هر دوي اين عوامل به كمك هم آمده، با انجام نفوذ اتمي، انحلال دو عنصر در دماي محيط صورت ميگيرد. به دليل تشكيل ساختارهاي نانوكريستال و حضور درصد زيادتري از اتمهـا در مرزدانـه، وجود درصد بالاي نواقص كريستالي مثل نابجـايي هـا و جاهـاي خـالي امكـان انحـلال درصـد بـالاتري از عنصر حل شونده در ساختار وجود دارد. بررسي چگونگي انحلال يك عنصر در عنصر ديگر در حين آلياژسازي مكانيكي از دو جنبه توسط پراش پرتو ايكس قابل بررسي نمود : 1-جابجايي پيك هاي مربوط به عنصر حلال يا زمينه. 2-كاهش شدت پيك هاي مربوط به عنصر حل شونده.
ABSTRACT
In this research, the zinc dissolution in aluminum is studied by grain size reduction. For this purpose, aluminum and zinc powders were grinded in 3%, 6% and 14% zinc in a planetary ball mill. X-ray analysis of optical microscopy was used to investigate the structure and how zinc dissolution was performed in the structure. The results indicate that by milling a mixture of aluminum powder and zinc oxide, zinc is initially dissolved in the supersaturated structure. Subsequently, with the continuation of the milling process and the reduction of the grain size, gradually Zn exits the structure and concentrates on the grain boundary. This causes the hardness of the alloy to decrease as well.
INTRODUCTION
One of the capabilities of the process of mechanical alloying is increasing the solubility of the two alloying elements. In fact, by performing mechanical alloying of two elements, which can be solved under normal environmental conditions, a higher percentage of the soluble element can be solved. During the mechanical alloying of two powders, for example, two dactyl metal powder, with the formation of the layered structure, the interconnection period of the two elements increases. As the intervals between the layers formed in the process of milling decrease, this section becomes more and more common. Increasing the fuzzy subscriber level, on the one hand, increases the energy of the system through free energy, and, on the other hand, decreases the intrusive distances. Both of these factors contribute to the dissolution of the two elements at ambient temperature by atomic influx. Due to the formation of nanocrystalline structures and the presence of a higher percentage of atoms in the boundary, the presence of a high percentage of crystalline defects, such as dislocations and empty spaces, makes it possible to dissolve a higher percentage of the soluble element in the structure. An investigation of how the element dissolves in another element during mechanical alloys can be investigated by X-ray diffraction from two aspects: 1. The displacement of the peaks associated with the solvent element or the background. 2. Decrease the intensity of the peaks associated with the solute element.
Year: 2007
Publisher : Eleventh National Congress of Metallurgy Engineers of Iran
By : Majid Tavousi, Fathollah Karimzadeh, Mohammad Hossein Enayati
File Information: persian Language/ 11 Page / size: 214 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : مجيد طاووسي ، فتح االله كريم زاده ، محمد حسين عنايتي
اطلاعات فایل : زبان فارسی / 11 صفحه / حجم : KB 214
نقد و بررسیها
هنوز بررسیای ثبت نشده است.