توضیحات
چکیده
در تحقيق حاضر، رفتار خستگي مخازن تحت فشار مورد بررسي قرار گرفته است. بدين منظوردر يـک مرحله به بررسي دلايل مکانيکي و متالورژيکي منجر به شکست مخازن تحت فشار پرداختـه شـد و در مرحله بعد رفتار شکست و شرايط رشد ترک خستگي مخازن تحت فشار در حين سرويس و در شرايط کاري با انجام تست هاي چقرمگي شکست ، (K1C) اندازه گيـري پارامترهـاي رشـد تـرک خـستگي و انجام آزمايش هاي شکست نگـاري توسـط ميکروسـکوپ الکترونـي روبـشي (SEM) مـورد آنـاليز و بررسي قرار گرفت.با توجه به بررسي هاي به عمل آمده و بر اساس رشد ترک خـستگي بـراي ارزيـابي عمر مخازن تحت فشار با در نظرگرفتن فاکتور شدت تنش آستانه اي ( ∆K th) به نظـر نمـي رسـد يـک آخال با قطر 1ميلي متردرشرايط عادي کارکرد موجب شکست ناگهاني در مخزن تحت فشار شـود. بـا توجه به اينکه استاندارد (استاندارد مورد استفاده در توليدمخازن تحت فشار) آخال هايي با قطـر حـداکثر 1ميلي متر را مجاز مي داند نشان مي دهد که نتايج اين تحقيق با استاندارد مذکور هم خواني دارد.
مقدمه
شکست مخازن تحت فشار در صنعت نفت وگاز همواره منجر به حوادث جاني و مالي جبران ناپذيري مي گردد. در اين ميان مطالعه و بررسي و آناليز شکست مخازن تحت فشار و يافتن علت شکـست و تخمين عمر از تخريب مخازن تحت فشار در حين سرويس دهي مي کاهد و باعـث کـاهش بـسياري از حوادث ناگوار مي گردد. بطور كلي مخازن تحت فشار در صنعت نفت و گاز يکي از قطعات بسيار مهم هستند و جهت افزايش ميزان امنيت در اين سيستم ها از اهميت و تـو جـه ويـژه اي بـر خوردارنـد. مخازن تحت فشار در حين سرويس دهي به وسيله تست هـاي التـرا سـونيک و ذرات مغناطيـسي مـورد بازرسی قرار مي گيرند. با انجام اين تست ها مي توان عيوب و ترکهـاي موجـود در مخـازن تحـت فشار را تشخيص داد و از طرفي ميتوان از طريق شکست و انـدازه گيـري چقـرمگـي شکـست قطعـات ميزان ترک بحراني را با توجه به تنش هاي وارده بر مخازن تحت فشار اندازه گيري کرد.
ABSTRACT
In this research, the fatigue behavior of pressure vessels is investigated. In this way, a mechanical and metallurgical reason led to the failure of pressure vessels, and then, the failure behavior and growth conditions of the fatigue cracking of the pressure vessels during service and in the working conditions by performing the failure toughness tests (K1C) of the size Tail fatigue growth and fracture tests were performed by scanning electron microscopy (SEM). Based on the investigations carried out and based on the growth of fatigue cracking to evaluate the life of the pressure vessels, considering the intensity factor Threshold stress (ΔK th) does not appear to be an admixture with a diameter of 1 millimeter in diameter The normal operating environment causes a sudden failure in the pressure vessel. Given that the standard (the standard used in the manufacture of pressurized condensers) permits a maximum diameter of 1 mm, the results of this study are consistent with the standard.
INTRODUCTION
The failure of pressure vessels in the oil and gas industry has always led to irreparable financial and financial accidents. In the meantime, the study, analysis and analysis of the pressure failure of the reservoirs and finding the cause of failure and life expectancy from the destruction of pressure vessels during service reduces and reduces many adverse events. Generally, pressure vessels in the oil and gas industry are one of the most important components and they are of particular importance in order to increase security in these systems. The pressure vessels during the service are examined by ultrasonic tests and magnetic particles. These tests can detect imperfections and cracks in pressurized reservoirs and, on the other hand, it is possible to measure the critical crack size by breaking and measuring the fracture toughness according to the stresses on pressure vessels.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Alireza Zare, Mohammad Rahim Nami
File Information: persian Language/ 12 Page / size: 618 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : عليرضا زارع، محمد رحيم نامی
اطلاعات فایل : زبان فارسی / 12صفحه / حجم : KB 618
نقد و بررسیها
هنوز بررسیای ثبت نشده است.