توضیحات
چکیده
در اين مقاله اثر مدلسازي همزمان سازه، فونداسيون و تجهيز، بر تلاش هاي داخلي، جابجايي و طراحي سازه مورد بررسي قرار گرفته است. بدين منظور يك سازه بتني نگهدارنده سيلو، كه در صنايع نفت، گاز و پتروشيمي داراي اهميت خاصي ميباشد، در نظر گرفته شده و در سه حالت مختلف در نرم افزار SAP 2000مدل گرديده است. در هر مدل، سازه بصورت مجزا در دو حالت استاتيكي و ديناميكي تحليل، طراحي و اندركنش تجهيز، سازه و پي بررسي ميگردد. جهت در نظر گرفتن اثر اندركنش سازه و تجهيز بر ضريب رفتار سازه از ضوابط آئين نامه ASCE-7 استفاده شده است. در مدل اول عكس العمل نيروهاي پايه تجهيز كه از قبل محاسبه شده بطور نقطه اي در محل قرارگيري پايه ها بر روي سازه اعمال و پاسخ سازه بدست ميآيد. در اين حالت فونداسيون سازه در نرم افزار ،SAFEطراحي ميگردد. حالت دوم شامل مدلسازي همزمان سازه و تجهيز ميباشد؛ بهطوريكه سيلو (تجهيز) در نرم افزار مدل گرديده و وزن پوسته سيلو از نوع بار مرده و ماده داخل آن از نوع بار زنده جهت محاسبه نيروي زلزله بصورت گسترده در ارتفاع توزيع ميشود. قابل ذكر است كه طراحي لرزه اي بر حسب آئين نامه UBCانجام گرفته است. در مدل آخر؛ سازه، فونداسيون و تجهيز همزمان در نرم افزار طراحي مدل گر ديده و پس از تحليل، نيروهاي داخلي و جابجايي سازه حاصل ميگردد. براي به دست آوردن اثر مدلسازي همزمان سازه نگهدارنده سيلو، فونداسيون و تجهيز مستقر بر روي سازه، نتايج آناليز و طراحي حالت سوم با ساير حالتها مقايسه و نتايج بيان ميگردد.
مقدمه
مسئله بررسي اندركنش سازه و تجهيز بر پاسخ سازه مورد توجه آيين نامه هاي مختلف طراحي بوده است. به گونه اي كه در آيين نامه UBCدر ناحيه سه و چهار، تعريف شده توسط آيين نامه، ميبايست اثر اندركنش سازه و اجزا غيرسازهاي، كه توسط سازه نگهداري مي شوند، مد نظر قرار گرفته شود. همچنين در آيين نامه ASCE-7با مقايسه وزن سازه و تجهيز معياري جهت تعيين ضريب رفتار سازه به منظور در نظر گرفتن اندركنش سازه و تجهيز بيان ميشود. در آيين نامه طراحي لرزه اي تاسيسات و سازه هاي صنعت نفت ايران ضوابط طراحي لرزه اي به منظور انتخاب روش تحليل و گستره آنها براي سازه هاي غير ساختماني مستقر بر سازه هاي ديگر بيان شده است.
ABSTRACT
In this paper, the effect of simultaneous simulation of structure, foundation and equipping on internal efforts, displacement and structural design have been investigated. For this purpose, a concrete silo retaining structure, which is of particular importance in the oil, gas and petrochemical industries, is considered and is modeled in SAP 2000 software in three different situations. In each model, the structure is analyzed separately, in two stages: static and dynamic, analysis, design, and interconnection of equipments, structures and processes. In order to consider the effect of structure and equipping on structural behavior coefficient, ASCE-7 rules have been used. In the first model, the response of the base forces of the equipping, which has been pre-calculated, is obtained at the point in the location of the base on the structure and the response of the structure. In this case, the Foundation Foundation is designed in SAFE software. The second mode involves simultaneous simulation of the structure and equipment, so that the silo (equipment) is modeled in the software, and the silly shell weight of the dead load type is distributed and the material inside it is of the type of live load to calculate earthquake force widely distributed in height. It is worth noting that seismic design was carried out in accordance with the UBC regulations. In the final model, the structure, foundation, and equipments are simulated in the model design software and after analysis, internal forces and displacement of the structure are obtained. In order to obtain the simultaneous simulation of the silo retaining structure, foundation and equipment based on the structure, the results of the analysis and design of the third state are compared with the other modes and the results are expressed.
INTRODUCTION
The issue of studying the interaction of structure and equipping on the structure response was considered by different design guidelines. As in the UBC regulations in Zone 3 and 4, as defined by the Regulations, the effect of the structure and non-structural components maintained by the structure should be considered. In ASCE-7, the structure of the structure is also compared with the standard equipment for determining the coefficient of structural behavior in order to consider the interaction of the structure and equipment. In seismic design of Iran’s oil industry facilities and structures, seismic design criteria are presented to determine the method of analysis and their scope for non-structural structures based on other structures.
Year: 2011
Publisher : Sixth National Congress on Civil Engineering
By : Mohammad Reza Mahmudian, Mahsa Jannati
File Information: persian Language/ 8 Page / size: 379 KB
Only site members can download free of charge after registering and adding to the cart
سال : 1390
ناشر : ششمین کنـگره ملی مهنـدسی عمـران
کاری از : محمدرضا محموديان ،مهسا جنتي
اطلاعات فایل : زبان فارسی / 8 صفحه / حجم : KB 379
نقد و بررسیها
هنوز بررسیای ثبت نشده است.