توضیحات
چکیده
به علت افزايش روزافزون يكسوسازها در وسايل الكترونيكي ميزان هارمونيكهاي تزريقي به شبكه افزايش می یابد. برای کاهش مشكلات ايجاد شده توسط هارمونيكهاي تزريقي به شبكه استانداردهايي براي محدود كردن هارمونيكها و افزايش ضريب توان وضع گرديده است. در اين مقاله روش هاي ارائه شده در مقالات براي اصلاح ضريب توان از نظر راندمان مورد بررسي قرار گرفته و روش اصلاح ضريب توان بدون پل به علت كاهش تلفات هدايتي انتخاب گرديده است. براي افزايش بيشتر راندمان روش هاي سوئيچينگ نرم ارائه شده بر روي مبدل اصلاح ضريب توان بدون پل بررسي شده و يك روش ZCTو يك روش ZVT انتخاب ميگردد. در ادامه مبدلهاي انتخابي ساخته شده و نتايج ساخت آنها ارائه گرديده و با هم مقايسه مي گردند. نتايج مقايسه نشان ميدهد كه راندمان مبدلهاي پيشنهادي نسبت به مبدل اصلاح ضريب توان بدون پل بهبود يافته است و مبدل ZCTباشد.
مقدمه
افزايش روزافزون استفاده از دستگاه هـاي الكترونيكـي باعـث بيشتر شدن تعداد مبدلهاي AC/DCمتصل به شبكه مي گـردد . اكثرا براي اين منظور از يكسوسازهاي معمولي كه شامل يك پـل يدايود و يك خازن ميباشد استفاده ميگردد كه ضريب تـوان در اين گونه يكسوسازها به حدود ايـن می رسـد. 7/0تا 5/0 گونه يكسوسازها معمولا هارمونيكهاي زيادي را به شبكه تحميـل مـي كنند كه باعث مشكلات زيادي بـراي شـبكه ها می شوند. همين منظور براي كـاهش ايـن مشـكلات اسـتانداردهايي شـبيه IEC-61000-3-2براي محدود كردن هارمونيكهاي تزريقي توسط مصرف كننده و همچنين بهبود ضريب توان اعمال مي گردد. اكثرا از يكسوسازها در تغذيـه DC اسـتفاده مـيگردد. بلوك دياگرام كلي مربوط بـه يـك تغذيـه DCالـف – 1در شـكل آورده شده است. شـود همانطور كه در اين بلوك دياگرام ديده مي براي اصلاح ضـريب تـوان از مبـدل اصـلاح ضـريب تـوان (PFC Converter) در ورودي اين تغذيه ها استفاده مي گردد. اما این امر موجب افزايش تعداد المانهاي موجـود در مسـير تـوان و افـزايش تلفات هدايتي می شود.
ABSTRACT
Due to the increasing number of rectifiers in electronic devices, the amount of intracellular harmonics increases. To reduce the problems caused by intrusive harmonics, the network has standards to limit harmonics and increase power factor. In this paper, the methods presented in the papers for power factor correction have been investigated in terms of efficiency, and the method of correction of power factor without bridges has been chosen due to reduction of conductivity losses. To increase the efficiency of the soft switching methods presented on the power bridge transformer without bridge, a ZCT method and a ZVT method are selected. Selected converters are made and the results of their construction are presented and compared. The results of the comparison show that the efficiency of the proposed converters has improved with respect to the bridge-free power factor correction converter and is a ZCT converter.
INTRODUCTION
Increasing the use of electronic devices increases the number of AC / DC converters connected to the network. For this purpose, most commonly used rectifiers, including a bridge bridge and a capacitor, are used. The power factor in these rectifiers is about this. 0.7 to 0.25 types of rectifiers usually impose many harmonics on the network, which causes a lot of problems for the networks. In order to reduce these problems, standards similar to IEC-61000-3-2 apply to limit consumer injectable harmonics and also improve power factor. Most of the rectifiers are used in DC power supply. The block diagram of the general diagram for a DC A-1 feed is given in Fig. As shown in this block, the power factor correction converter (PFC Converter) is used to power these inputs. But this increases the number of elements in the path of power and increases conduction losses.
Year: 2010
Publisher : Eighteenth International Energy Conference of Iran
By : Mohammad Mahdavi Mazdeh, Hossein Farzanehfard, Mohammad Reza Amini
File Information: English Language/ 6 Page / size: 727 KB
سال :1389
ناشر : هجدهمین کنفرانس بین المللی برق ایران
کاری از : محمد مهدوی مزده، حسين فرزانه فرد ،محمدرضا اميني
اطلاعات فایل : زبان انگلیسی / 6 صفحه / حجم : KB 727
نقد و بررسیها
هنوز بررسیای ثبت نشده است.