توضیحات
چکیده
تشكيل مگنتيت بيش از حد در حين عمليات تبديل مات در كنورتر پيرس اسـميت يكـي از عوامـل مـضر عملياتي بوده و مشكلاتي همچون: كاهش حجم مفيد كنورتر و درنتيجه كاهش ظرفيـت توليـد، افـزايش تلفات مس در سرباره، افزايش عمليات پانچينگ كنورتر، افزايش توليد ته پاتيلي، افـزايش مـواد سـرد در گردش و … را بدنيال خواهد داشت. در ايـن تحقيـق بـا بررسـي شـرايط انـدازه دانـه سـيليس مـصرفي در كنورتر، بررسي اثر نـسبت Fe/SiO2سـرباره، بررسـي اثـر نـسبت Fe/Cuمـات و بررسـي روش حـبس سرباره بليستر در سيكلهاي عملياتي كنورترهاي ذوب مس خاتون آبـاد مـشخص گرديـد كـه بـا مـصرفي واستفاده از سيليس با اندازه دانه 15-20 mmو اسـتفاده از درصـد آهـن مـات وضـرايب اسـتوكيومتري واكنش تشكيل سرباره براي محاسبه سيليس مصرفي به جاي روابط تجربي و نهايتا شارژ سيليس بيـشتر بـه ميزان ٪1/1نسبت به حالت استوكيومتري ميتوان مشكل بيلد آپ بدنه كنورترها را به يك سوم تقليـل و نهايتا ميزان مواد سرد توليدي را به نصف كاهش داد.
مقدمه
عمليات تبديل مات به مس بليستر در كارخانه ذوب خاتون آباد به وسيله سه كنورتور پيرس اسميت انجام مي گيرد. استفاده از حداكثر ظرفيت كوره هاي تبديل به منظور رسيدن به ظرفيت اسـمي از دغدغـه هـاي مهم اين كارخانه بوده كه اگر به هر علتي كوره هاي كنورتر در شرايط پـايين تـر از ظرفيـت اسـمي كـار كنند به عنوان گلوگاه توليد باعث افت توليد خواهند شد. يكي از عوامل محدود كننـده توليـد كنورترهـا كاهش حجم داخلي آنها به علت بـالا آمـدگي بدنـه داخلـي و ايجـاد رسـوب روي ديـواره هـاي داخلـي آنهاست كه مگنتيت قسمت عمده اين رسوبات را تشكيل مي دهد. جهـت شـناخت ماهيـت فراينـد توليـد سرباره، عوامل موثر بر آن و علل تشكيل مگنتيت و راههاي كنترل آن تحقيقات زيادي توسط دانـشمندان مختلف انجام گرفته است كه عوامل مهمي همچون دما، ميزان دمش ، تركيـب مـات، نـسبت Fe/SiO2 سرباره، اندازه دانه سيليس، خلوص وشرايط افزودن سيليس مصرفي، هواي غنـي شـده بـه طـور مـشخص مورد بررسي قرار گرفته اند و در تحقيقات مختلف محدوده هاي متفاوتي براي آنهـا ذكـر شـده اسـت. در كارخانجات مختلف نيز پيشنهادهاي گوناگوني جهت كنترل مگنتيت از قبيل: اسـتفاده از سـيليس بـا عيـار بالاتر،كك، سيليس با دماي بالا و … مورد بررسي قرار گرفته اند.
ABSTRACT
The formation of excess magnetite during the matte conversion operation at the Smiris Pearce Controller is one of the most harmful operational problems, such as reducing the volume of useful materials and, consequently, reducing production capacity, increasing copper losses in the slag, increasing the punch operations, increasing the production of butylated oil, The increase of cool working in circulation and … will be of great importance. In this research, by studying the size of the grain size of the silica used in the converter, the study of the effect of Fe / SiO2 slag ratio, the effect of the ratio of Fe / Cu ratio of the matrix and the investigation of the method of suspending slag of bilistor in the operating cycles of the copper smelting couplers of Khatun Abad, it was determined that using silica with size 15-20 mm grains and using the percentage of iron content The stoichiometric properties of the slag formation reaction to calculate the amount of silica consumed instead of the empirical relationships and finally the charge of silica more than 1/1% compared to the stoichiometric state can reduce the problem of billets to reduce the condom’s body to one third and finally The amount of cold production is halved The contract.
INTRODUCTION
Matte conversion to Blister copper is carried out at Khatun Abad smelter by three PI Smith Transformers. Using the maximum capacity of converters in order to reach nominal capacity is one of the important concerns of this factory that if for any reason, the furnace furnace works under lower nominal capacities as a bottleneck of production will cause a loss. One of the factors limiting the production of conveyors is the reduction of their internal volume due to the uplift of the inner body and the formation of sediment on their inner walls, which consists of magnetite as the major part of these sediments. Several studies have been carried out to determine the nature of the slag production process, the factors affecting it and the causes of magnetite formation and its control methods. Important factors such as temperature, blow rate, opaque composition, slag Fe / SiO2 ratio, silica grain size, purity The conditions for the addition of silica, the enriched air have been specifically studied, and various research areas have been identified for different ranges. Various suggestions for controlling magnetite have been made at different factories, such as: use of higher grade silica, coke, high temperature silica, and so on.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Mahmood Khodadadi , Alireza Moeini , Ali Saeedi
File Information: persian Language/ 11 Page / size: 128 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : محمود خدادادي ، عليرضا معيني ، علي سعيدي
اطلاعات فایل : زبان فارسی / 11 صفحه / حجم : KB 128
نقد و بررسیها
هنوز بررسیای ثبت نشده است.