توضیحات
چکیده
فرايند تغيير شكل پلاستيكي شديد توسط پرس زاويه اي با مقاطع يكسان (ECAP) در چند دهه اخير به عنوان يك روش با اعمال كرنش زياد جهت دستيابي به ساختار ريز دانه با خواص مكانيكي بالا و ريز ساختار يكنواخت مورد توجه قرار گرفته است. آلياژ آلومينيوم (A(356به دليل ساختار دندريتي وحضور فاز يوتكتيك ترد ، مستعد به شكست در اعمال كرنش به اين روش مي باشد. ایجاد ريز ساختار ريختگي ريز اوليه به همراه عمليات حرارتي منجر به بهبود انجام فرايند مي شود. اعمال كرنش در مسير ، Cمنجر به تخريب وايجاد ترك در نمونه ها شده ، در حاليكه انجام فرايند در مسير هاس Aو BCتا مراحل بيشتر امكان پذير مي باشد. انجام فرايند ECAPمنجر به شكسته شدن شبكه سيليسم هاي يوتكتيك شده و توزيع آنها را در ساختار يكنواخت مي كند.
مقدمه
در بين آلياژهاي آلومينيوم ،آلياژ هاي آلومينيوم – سيليسيم به طور گسترده اي در آلياژهاي ريختگي تجاري در صنايع اتومبيل سازي ، هوا فضا و الكتريكي به دليل ضريب انبساط حرارتي پايين ، دانسيته پايين ، مقاومت به سايش و استحكام خوب در دماي بالا مورد استفاده قرار مي گيرند. به هر حال چقرمگي و انعطاف پذيري پايين اين آلياژ استفاده از آن را محدود ساخته است. در سال هاي اخيركوشش هايي جهت افزايش خواص مكانيكي اين آلياژ توسط تغيير شرايط انجمادي، عمليات حرارتي هاي مضاعف و يا افزودن عناصر آلياژي جهت اصلاح مورفولوژي ذرات سيليسيم انجام گرديده است . اصلاح ريز ساختار همچنين توسط تغيير شكل پلاستيكي شديد ، مانند پرس زاويه اي با مقاطع يكسان ، (ECAP) امكان پذير مي باشد. در اين روش نمونه بين دوكانال متقاطع با سطح مقطع يكسان و با زاويه عموما 90درجه پرس مي گردد. روش ECAPنخستين بار توسط Segalو همكارانش مطرح شد كه در آن نمونه يا كه در كانال عمودي قرار مي گيرد ، توسط سنبه اي به كانال افقي رانده مي شود. در اين حالت نمونه به واسطه برش ساده تغيير شكل مي دهد ، در حاليكه سطح مقطع آن بدون تغيير باقي مانده و تكرار فرايند امكان پذير است. در بين روش هاي جديد تغيير شكل پلاستيك شديد، پرس زاويه اي با مقاطع يكسان يكي ازموثرترين وكاربردي ترين روش ها در رسيدن به ساختارريزدانه است.
ABSTRACT
The process of severe plastic deformation by the same sectional angle (ECAP) in recent decades has been considered as a method with high strain to achieve a fine grain structure with high mechanical properties and uniform microstructure. Aluminum alloy (A 356) due to the dendritic structure and the presence of a crude eutectic phase, is prone to failing to apply the strain to this method. Creating a fine microstructure of the fine finite element along with heat treatment leads to improvement of the process, applying strain to the path leading to C Causing destruction and cracks in the specimens, while performing the process on the Haas A and BC paths is more feasible. The ECAP process leads to the breakdown of the network of eutectic silicas and their distribution in a uniform structure.
INTRODUCTION
Among aluminum alloys, aluminum-silicon alloys are widely used in commercial casting alloys in the automotive, aerospace and electrical industries due to its low expansion coefficient, low density, abrasion resistance and high strength at high temperatures. Take it However, its low toughness and low elasticity limit its use. In recent years, attempts have been made to increase the mechanical properties of this alloy by changing the freezing conditions, double heat treatment, or adding alloy elements to correct the morphology of the silicon particles. Microstructure modification is also possible by severe plastic deformation, such as angular press with the same sections (ECAP). In this method, the specimen between the two-channel cross-section with the same cross-section is pressed with a generally 90-degree angle. The ECAP method was first introduced by Segal and his colleagues in which the sample, which is located in the vertical channel, is driven by a hole in the horizontal channel. In this case, the sample is modified by a simple cut, while its cross-sectional area remains unchanged and the process is repeated. Among the new methods of intensive plastic deformation, angular presses with the same sections are one of the most effective and most practical methods for reaching the fine-grained structure.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Marzieh Moradi, Bashir Heidarian, Mahmood Nili Ahmad Abadi and Mohammad Habibi Parsa
File Information: persian Language/ 11 Page / size: 2.94 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : مرضيه مرادي ، بشير حيدريان ، محمود نيلي احمد آبادي ومحمد حبيبي پارسا
اطلاعات فایل : زبان فارسی / 11 صفحه / حجم : KB 2.94
نقد و بررسیها
هنوز بررسیای ثبت نشده است.