توضیحات
چکیده
در اين مقاله رفتار كششي فولادهاي مرتبه اي توليد شده به روش ذوب سـربارهاي مـورد تحقيـق و بررسـي قرار گرفته است . فولادهاي مرتبه اي شامل لايه هاي فريت، آستنيت، بينايت و مارتنزيـت مـيباشـند كـه از طريـق نفـوذ عناصـر آليـاژي در خـلال پروسـه ذوب سـربارهاي تشـكيل مـيگردنـد. اسـتحكام كششـي كامپوزيت هاي حاصله در ارتباط با تركيب و تعداد لايه ها بوده كه براساس رفتار كششي هر يك از فازهـا به صورت جداگانه مدل گرديده است. تنش تسليم هر جزء در كامپوزيت با مقدار ريز سختي همـان جـزء در ارتباط ميباشد. با توجه به رابطه هولومان در مورد تنش ـ كرنش حقيقي استحكام كششـي هـر جـزء بـا ريزسختي همان جزء به يكديگر مرتبط ميگردند. با اعمال قـانون مخلـوط فـازي، اسـتحكام كششـي كـل كامپوزيت از طريق روش عدد قابل محاسبه ميباشد. نتايج به دست آمده در تطابق خـوبي بـا نتـايج عملـي ميباشند.
مقدمه
اگر چه اخيراً توجه خوبي به مواد مرتبـه اي (FGMs) مبـذول گشـته اسـت و در مـواردي از قبيـل رفتار ترموالاستيك ـ پلاستيك انتشار امـواج تنشـي و تـنش باقيمانـده مـورد مـدلسـازي قـرار گرفته اند، ليكن كاربرد و كارايي مواد مرتبه اي با پايه فلزي هنوز قابل بررسي و تحقيق ميباشند. فولادهاي مرتبه اي (FGSs) طي پروسه ذوب سربارهاي و از فولاد ضدزنگ آستنيتي و فولاد كربني ايجاد ميگردد.مطالعه ريزساختاري فولادهاي مرتبه اي نشان ميدهد كه اين كامپوزيـتهـا حـاوي لايـه هـاي فريـت، آستنيت، بينايت و مارتنزيت ميباشند. با انتخاب ترتيب و ضخامت مناسب فولادهاي آسـتنيتي و فريتـي بـه عنوان الكترود اوليه ميتوان تنوع و همچنين ضخامت فازهاي حاصله پس از پروسه ذوب مجدد را كنتـرل نمـود. هنگـامي كـه الكتـرود اوليـه شـامل دو قسـمت فريتـي و آسـتنيتي (α 0 γ 0) مـيباشـد، مورفولـوژي كامپوزيت حاصله به صورت (αβ γ) ميباشد. نفوذ اتمهاي كروم، نيكل و كربن حين پروسه ذوب مجدد، نحوه توزيع اين عناصـر را در كامپوزيـت هـاي توليد شده كنترل ميكند. هنگام نفـوذ عناصـر آليـاژي نـواحي مختلفـي بـا مشخصـه هـاي انتقـالي متفـاوت تشكيل ميگردد. نفوذ اتم ها به صورت منفرد يا گروهي فازهـاي مختلفـي از جملـه بينايـت و مارتنزيـت را تشكيل ميدهد. در اين تحقيق رفتار كششي اين كامپوزيتها مورد تحقيق و بررسي قرار گرفته است.
ABSTRACT
In this paper, the tensile behavior of steels produced by overlay melting has been investigated. Steady steels include ferrite, austenite, bayette and martensite layers that form through the penetration of alloying elements during the melting process. The tensile strength of the resulting composites is related to the composition and number of layers, which are modeled separately according to the tensile behavior of each of the phases. The stress of each component in the composite is related to the microstructure of the component. According to Holuman’s relation to the true strain stress, the tensile strength of each component with the same microhardness is related to each other. By applying the fuzzy mixture law, the tensile strength of the entire composite is calculated numerically. The results are in good agreement with the practical results.
INTRODUCTION
Although recent attention has been paid to FGMs, and in some cases, such as thermoelastic behavior of plastic tensile stresses and residual stresses, the applicability and efficiency of metal-grade materials are still to be considered. Research. Steady-state steels (FGSs) are produced during the over-melting process of austenitic stainless steel and carbon steel. A microstructure study of steady-state steels shows that these composites contain ferrite, austenite, bayite and martensite layers. By choosing the order and thickness of austenitic and ferrite steels as the primary electrode, it is possible to control the variation and also the thickness of the resulting phases after the melting process. When the primary electrode consists of two ferrite and austenitic portions (α 0 γ 0), the resulting composite morphology is αβγ (αβγ). The influence of chromium, nickel and carbon atoms during the melting process controls the distribution of these elements in the composites produced. During the penetration of the alloying elements, different regions are formed with different transitional characteristics. The intrusion of atoms, individually or in groups, consists of different phases, including Bite and Martensite. In this research, the tensile behavior of these composites has been investigated.
Year: 2007
Publisher : 11th National Congress of metallurgy of Iran
By : Reza Parastar Namin, Jamshid Aghazadeh, Mohammad Hossein Shah Hosseini
File Information: persian Language/ 13 Page / size: 1.01 KB
سال : 1386
ناشر : يازدهمين كنگره ملي مهندسين متالورژی ايران
کاری از : رضا پرستار نمين ، جمشيد آقازاده ، محمد حسين شاه حسيني
اطلاعات فایل : زبان فارسی / 13 صفحه / حجم : KB 1.01
نقد و بررسیها
هنوز بررسیای ثبت نشده است.